--- kernel-2.6.27.orig/drivers/i2c/chips/Kconfig
+++ kernel-2.6.27/drivers/i2c/chips/Kconfig
@@ -51,6 +51,13 @@
 	  This driver can also be built as a module.  If so, the module
 	  will be called eeprom.
 
+config TPA6130A2
+	tristate "TPA6130a2 headphone amplifier support"
+	depends on I2C
+	help
+	  Say yes here to enable support for Texas Instruments TPA6130A2
+	  headphone amplifier.
+
 config SENSORS_PCF8574
 	tristate "Philips PCF8574 and PCF8574A (DEPRECATED)"
 	depends on EXPERIMENTAL && GPIO_PCF857X = "n"
@@ -137,6 +144,53 @@
 	  This driver can also be built as a module.  If so, the module
 	  will be called tps65010.
 
+config SENSORS_TLV320AIC23
+	tristate "Texas Instruments TLV320AIC23 Codec"
+	depends on I2C && I2C_OMAP
+	help
+	  If you say yes here you get support for the I2C control
+	  interface for Texas Instruments TLV320AIC23 audio codec.
+
+config GPIOEXPANDER_OMAP
+	bool "GPIO Expander PCF8574PWR for OMAP"
+	depends on I2C && (ARCH_OMAP16XX || ARCH_OMAP24XX)
+	help
+	  If you say yes here you get support for I/O expander calls
+	  to configure IrDA, Camera and audio devices.
+
+config TWL4030_MADC
+	tristate "TWL4030 MADC Driver"
+	depends on TWL4030_CORE
+	help
+	  The TWL4030 Monitoring ADC driver enables the host
+	  processor to monitor analog signals using analog-to-digital
+	  conversions on the input source. TWL4030 MADC provides the
+	  following features:
+	   - Single 10-bit ADC with successive approximation register (SAR) conversion;
+	   - Analog multiplexer for 16 inputs;
+	   - Seven (of the 16) inputs are freely available;
+	   - Battery voltage monitoring;
+	   - Concurrent conversion request management;
+	   - Interrupt signal to Primary Interrupt Handler;
+	   - Averaging feature;
+	   - Selective enable/disable of the averaging feature.
+
+	  Say 'y' here to statically link this module into the kernel or 'm'
+	  to build it as a dinamically loadable module. The module will be
+	  called twl4030-madc.ko
+
+config TWL4030_USB
+	tristate "TWL4030 USB Transceiver Driver"
+	depends on TWL4030_CORE
+
+config TWL4030_PWRBUTTON
+	tristate "TWL4030 Power button Driver"
+	depends on TWL4030_CORE
+
+config TWL4030_POWEROFF
+	tristate "TWL4030 device poweroff"
+	depends on TWL4030_CORE
+
 config SENSORS_MAX6875
 	tristate "Maxim MAX6875 Power supply supervisor"
 	depends on EXPERIMENTAL
@@ -162,6 +216,29 @@
 	  This driver can also be built as a module.  If so, the module
 	  will be called tsl2550.
 
+config SENSORS_TSL2563
+       tristate "Taos TSL2563 ambient light sensor"
+       depends on I2C && HWMON
+       help
+         If you say yes here you get support for the Taos TSL2563
+         ambient light sensor.
+
+         This driver can also be built as a module.  If so, the module
+         will be called tsl2563.
+
+config LP5521
+	tristate "LP5521 LED driver chip"
+	depends on I2C
+	help
+	  If you say yes here you get support for the National Semiconductor
+	  LP5521 LED driver.
+
+config LIS302DL
+        tristate "STMicroelectronics LIS302DL Acceleration Sensor Driver"
+        depends on I2C
+        help
+          Say yes here if you want support for the LIS302DL accelerometer chip
+
 config MENELAUS
 	bool "TWL92330/Menelaus PM chip"
 	depends on I2C=y && ARCH_OMAP24XX