--- kernel-2.6.27.orig/drivers/gpu/drm-tungsten/Kconfig
+++ kernel-2.6.27/drivers/gpu/drm-tungsten/Kconfig
@@ -0,0 +1,130 @@
+#
+# DRM device configuration from Tungsten Graphics
+#
+# This driver provides support for the
+# Direct Rendering Infrastructure (DRI) in XFree86 4.1.0 and higher.
+#
+# The driver is the Tungsten alternative of the original DRM driver.
+#
+
+menuconfig DRM_TUNGSTEN
+	tristate "Direct Rendering Manager (Tungsten - XFree86 4.1.0 and higher DRI support)"
+	help
+	  Kernel-level support for the Direct Rendering Infrastructure (DRI)
+	  introduced in XFree86 4.0. If you say Y here, you need to select
+	  the module that's right for your graphics card from the list below.
+	  These modules provide support for synchronization, security, and
+	  DMA transfers. Please see <http://dri.sourceforge.net/> for more
+	  details.  You should also select and configure AGP
+	  (/dev/agpgart) support.
+
+config DRM_TUNGSTEN_PVR2D
+	tristate "PVR2D kernel helper"
+	depends on DRM_TUNGSTEN && PVR
+	help
+	  Choose this option if you want to give DRI access to your card
+	  handled by the Imagination PowerVR framework. If M is selected,
+	  the module will be called pvr2d.
+
+if DRM_TUNGSTEN && (AGP || AGP=n) && PCI && !EMULATED_CMPXCHG
+
+config DRM_TUNGSTEN_TDFX
+	tristate "3dfx Banshee/Voodoo3+"
+	help
+	  Choose this option if you have a 3dfx Banshee or Voodoo3 (or later),
+	  graphics card.  If M is selected, the module will be called tdfx.
+
+config DRM_TUNGSTEN_R128
+	tristate "ATI Rage 128"
+	help
+	  Choose this option if you have an ATI Rage 128 graphics card.  If M
+	  is selected, the module will be called r128.  AGP support for
+	  this card is strongly suggested (unless you have a PCI version).
+
+config DRM_TUNGSTEN_RADEON
+	tristate "ATI Radeon"
+	help
+	  Choose this option if you have an ATI Radeon graphics card.  There
+	  are both PCI and AGP versions.  You don't need to choose this to
+	  run the Radeon in plain VGA mode.
+
+	  If M is selected, the module will be called radeon.
+
+config DRM_TUNGSTEN_I810
+	tristate "Intel I810"
+	depends on AGP && AGP_INTEL
+	help
+	  Choose this option if you have an Intel I810 graphics card.  If M is
+	  selected, the module will be called i810.  AGP support is required
+	  for this driver to work.
+
+config DRM_TUNGSTEN_I915
+	tristate "i915 driver"
+	depends on AGP && AGP_INTEL
+	help
+	  Choose this option if you have a system that has Intel 830M, 845G,
+	  852GM, 855GM 865G or 915G integrated graphics.  If M is selected, the
+	  module will be called i915.  AGP support is required for this driver
+	  to work. This driver is used by the Intel driver in X.org 6.8 and
+	  XFree86 4.4 and above. If unsure, build this and i830 as modules and
+	  the X server will load the correct one.
+
+config DRM_TUNGSTEN_MGA
+	tristate "Matrox g200/g400"
+	help
+	  Choose this option if you have a Matrox G200, G400 or G450 graphics
+	  card.  If M is selected, the module will be called mga.  AGP
+	  support is required for this driver to work.
+
+config DRM_TUNGSTEN_SIS
+	tristate "SiS video cards"
+	depends on AGP
+	help
+	  Choose this option if you have a SiS 630 or compatible video
+          chipset. If M is selected the module will be called sis. AGP
+          support is required for this driver to work.
+
+config DRM_TUNGSTEN_VIA
+	tristate "Via unichrome video cards"
+	help
+	  Choose this option if you have a Via unichrome or compatible video
+	  chipset. If M is selected the module will be called via.
+
+config DRM_TUNGSTEN_SAVAGE
+	tristate "Savage video cards"
+	help
+	  Choose this option if you have a Savage3D/4/SuperSavage/Pro/Twister
+	  chipset. If M is selected the module will be called savage.
+
+config DRM_TUNGSTEN_FFB
+	tristate "Creator/Creator3D direct rendering"
+	help
+	  Choose this option to include the Creator/Creator3D direct rendering
+	  driver. If M is selected the module will be called ffb.
+
+config DRM_TUNGSTEN_MACH64
+	tristate "MACH64 Rage Pro video card"
+	help
+	  Choose this option if you have a Mach64 Rage Pro chipset.
+	  If M is selected the module will be called mach64.
+
+config DRM_TUNGSTEN_NV
+	tristate "Nvidia video card (NV driver)"
+	help
+	  Choose this option if you have a Nvidia chipset and want to use the
+	  original nv driver. If M is selected the module will be called nv.
+
+config DRM_TUNGSTEN_NOUVEAU
+	tristate "Nvidia video card (Nouveau driver)"
+	help
+	  Choose this option if you have a Nvidia chipset and want to use the
+	  nouveau driver. If M is selected the module will be called nouveau.
+
+config DRM_TUNGSTEN_XGI
+	tristate "XGI video card"
+	help
+	  Choose this option if you have a XGI chipset. If M is selected the
+	  module will be called xgi.
+
+endif # DRM_TUNGSTEN && (AGP || AGP=n) && PCI && !EMULATED_CMPXCHG
+