oscam.conf(5)

NAME
oscam.conf - main configuration file for OSCam

SYNOPSIS
The main configuration file for OSCam contains global parameters such as debugging, logging, monitor, protocols and anti-cascading. sections in oscam.conf are nonrecurring. The [global] section is required. All other sections are optional.

DESCRIPTIONS

  The [global] section

nice = -20..+20
    system priority, default:99

pidfile = filename
    set PID file, default:none

logfile = [filename][;syslog][;stdout]
    logging targets, default:/var/log/oscam.log. You can define a maximum of one filename and additionally to log to stdout or syslog (you can also only log to stdout or syslog and omit the filename).
PP initial_debuglevel = level
    set initial debug level for OSCam start, default:0
PP sysloghost = hostname
    set remote syslog host, default:none

syslogport = port
    set TCP/IP port for remote syslog host, default:none

ecmfmt = format
    define ECM log format, default:c&p/i/s/l:h

    possible variables:

      c = CAID
      d = PID
      e = CSP hash
      g = ID of origin gbox peer
      h = checksum
      i = channel ID
      j = distance of gbox hops
      l = length
      o = ONID
      p = provider ID
      s = service ID
      w = CW
      y = payload

    use a value as prefix to hide variable with this value, control characters will be escaped by "\"

     example: ecmfmt = c&0p/i/d/s/l:h.e_w
              (hide provider ID if 0)

loghistorysize = bytes
    size of log message history in web interface or monitor, 0 = disabled, default:4096

maxlogsize = kbytes
    maximum log file size, 0 = unlimited, default:10

logduplicatelines = 0|1
    1 = enable logging of duplicate lines in the log, default:0

disablelog = 0|1
    1 = disable log file, default:0

cwlogdir = path
    directory for CW logging, default:config dir

emmlogdir = path
    directory for EMM logging, default:config dir

usrfile = filename
    log file for user logging, default:none

    log file format:

     date
     time
     CWs per second
     username
     IP address of client
     TCP/IP port
     CWs found
     CWs from cache
     CWs not found
     CWs ignored
     CWs timed out
     CWs tunneled
     login time in unix/POSIX format
     logout time in unix/POSIX format
     protocol

disableuserfile = 0|1
    1 = avoid logging although userfile is set, default:1 (also set automatically if userfile is empty)

usrfileflag = 0|1
    usrfile logging mode:

      0 = only client logon/logoff will be logged in usrfile (default)
      1 = each zapping of a client will be logged in usrfile

disablemail = 0|1
    1 = disable saving NDS Videoguard mail messages from provider, default:1

mailfile = file
    define file saving NDS Videoguard mail messages from provider, default:none

enableled = 0|1|2
     0 = LED support disabled (default)
     1 = LED support enabled for routers
     2 = LED support enabled for Qbox HD

waitforcards = 0|1
    1 = wait for local SCs on startup before opening network ports, default:1

waitforcards_extra_delay = delay
    additional delay in milli-seconds after waiting for local SCs on startup before opening network ports, default:500

preferlocalcards = 0|1
    SC decoding behavior:

     0 = local SCs used like a remote reader
     1 = prefer cache exchange based SCs (default)
     2 = prefer local SCs

readerrestartseconds = seconds
    seconds beetween restarts, 0 = disable reader restart, default:5

block_same_ip = 0|1
    1 = reject looping ECMs from clients to readers with the same IP address, default:1

block_same_name = 0|1
    1 = reject looping ECMs from clients to readers with the same name, default:1

clienttimeout = milli-seconds|seconds
    value (clienttimeout in seconds < 100, else milli-seconds) for client process to wait for key, default:5

clientmaxidle = seconds
    value for client process being idle before disconnect, 0 = idle disconnect disabled, default:120

suppresscmd08 = 0|1
    0 = tell camd 3.5x, 3.57x and 3.78x clients not to request again for rejected CAID, service ID and provider ID combination, 1 = disable, can be overwritten per user in oscam.user, default:0

fallbacktimeout = milli-seconds
    time falling back to fallback reader, default:2500

fallbacktimeout_percaid = milli-seconds
    time falling back to CAID restricted fallback reader, default:2500

sleep = minutes
    time waiting for inactive users, default:none, can be overwritten per user in oscam.user

serverip = IP address
    bind service to specified IP address, default:none

bindwait = seconds
    value to wait for bind request to complete, default:120

netprio = priority
    network priority, default:system given

resolvegethostbyname = 0|1
    set mode for DNS resolving:

      0 = getadressinfo (default)
      1 = gethostbyname

failbancount = count
    number of incorrect logins after an ip address will be blocked, default:0

failbantime = minutes
    time for IP based blocking for clients with an invalid login attempt, 0 = failban is disabled, default:0

dropdups = 0|1
    mode for duplicate client connections (requirement: uniq > 0):

      0 = mark client as duplicate, but don't disconnect them (default)
      1 = drop duplicate connections instead of marking as duplicate

unlockparental = 0|1
    1 = unlock parental mode option to disable Seca and Viaccess pin code request for adult movie, default:0

double_check = 0|1
    1 = ECM will be send to two or more readers with the same SC and the CWs will be verified against each other, lb_nbest_readers must be set to 2 or higher, default:0

double_check_caid = [CAID1|first two digits of CAID1],[CAID2|first two digits of CAID2]...
    ECM will be send to two or more readers with the same SC and the CWs will be verified against each other for defined CAID or first two bytes of CAID, lb_nbest_readers must be set to 2 or higher, default:none
getblockemmauprovid = 0|1
    1 = server overrides EMM blocking defined on client site, default:0

lb_mode = mode
    load balancing mode:

     0 = load balance disabled, ECMs go to all readers (default)
     1 = fastest reader first, after 5 ECMs the reader with the fastest
         response time will be selected
     2 = oldest reader first, reader with the longest no answer
     3 = lowest usage level, the usage level will be calculated by the
         sum of 5 ECMS response times, the higher a reader is busy, the
         higher is usage level

lb_save = 0|counts
    save auto load balance statistics:

          0 = saving of auto load balance statistics disabled (default)
     counts = save auto load balance statistics every counts ECMs
              (minimum 100)

    To save CPU power a minimum counts of 100 is recommended.

lb_nbest_readers = counts
    set count of best readers for load balancing, default:1

lb_nfb_readers = counts
    set count of fallback readers for load balancing, default:1

lb_nbest_percaid = CAID1:count1[,CAID2:count2]...
    set count of best readers per CAIDs for load balancing, wildcard CAIDs with two-digit CAIDs possible, default:none

     example: lb_nbest_percaid = 0100:4,0200:3,03:2,04:1
              (wildcard CAIDs 03xx and 04xx)

lb_min_ecmcount = counts
    minimal ECM count to evaluate load balancing values, default:5

lb_max_ecmcount = counts
    maximum ECM count before resetting load balancing values, default:500

lb_reopen_seconds = seconds
    time between retrying failed load balanced readers/CAIDs/providers/services, default:900

lb_reopen_invalid = 0|fB1
    0 = E_INVALID will be blocked until statistics has been cleaned, default:1

lb_force_reopen_always = 0|1
    1 = force reopening immediately all failing readers if no matching reader was found, default:0

lb_retrylimit = milli-seconds
    retry next load balanced reader only if response time is higher then lb_retrylimit, default:0

lb_savepath = filename
    filenanme for saving load balancing statistics, default:/tmp/.oscam/stat

lb_stat_cleanup = hour
    hours after the load balancing statistics will be deleted, default:336

lb_retrylimits = CAID1:time1[,CAID2:time2]...
    load balancing retry limit time per CAID, wildcard CAIDs with two-digit CAIDs possible, default:none

     example: lb_retrylimits = 12:0100,34:0200,5678:0300
              (wildcard CAIDs 12xx and 34xx)

lb_noproviderforcaid = CAID1[,CAID2]...
    ignore provider information for CAIDs to reduce load balancing statistic data, wildcard CAIDs with two-digit CAIDs possible, default:none

     example: lb_noproviderforcaid = 0100,02,0300,04
              (wildcard CAIDs 02xx and 04xx)

lb_max_readers = limit
    restrict the reader count to limit during load balancing learning:

         0 = unlimited (default)
     limit = restrict load balancer readers to limit

lb_auto_timeout = 0|1
    1 = enable automatic timeout based on load balancing statistics, default:0

lb_auto_timeout_p = percent
    percent added to average time as timeout time, default:30

lb_auto_timeout_t = milli seconds
    minimal time added to average time as timeout time, default:300

lb_auto_betatunnel = 0|1
    1 = enable automatic Betacrypt tunneling detection for CAIDs 1801, 1833, 1834, and 1835 for load balancing, Betacrypt defintion in oscam.user with betatunnel will be prefered, default:1

lb_auto_betatunnel_mode = 0|1|2
    set mode for automatic Betacrypt tunneling:

     0 = CAID 18XX tunneling to CAID 17X2 only (default)
     1 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801)
     2 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834)
     3 = CAID 18XX tunneling to CAID 17X2 and CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835)
     4 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1801 only)
     5 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1834 only)
     6 = CAID 17X2 tunneling to CAID 18XX (CAID 1833/1835 only)

lb_auto_betatunnel_prefer_beta = direction
    set direction for automatic Betacrypt/Nagravision selection:

       0 = disabled (default)
       1 = always Betacrypt
     105 = represents the middle
     200 = always Nagravision

  The [monitor] section

port = 0|port
    UDP port for monitor, 0 = monitor disabled, default:0

serverip = IP address
    bind service to specified IP address, default:all

nocrypt = IP address|IP address range[,IP address|IP address range]...
    unsecured monitor connection, default:none

     example: nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255

aulow = minutes
    time no EMM occurs so that client is set to low, switch from status "active" to "on", default:30

monlevel = 0|1|2|3|4
    monitor level:

     0 = no access to monitor
     1 = only server and own procs
     2 = all procs, but viewing only (default)
     3 = all procs, reload of oscam.user possible
     4 = complete access

    monlevel can be overwritten per user in oscam.user.

hideclient_to = seconds
    time to hide clients in the monitor if not sending requests, 0 = disabled, default:25

  The [webif] section
httpport = [+]port
    port for web interface, 0 = disabled, praefix + = enable SSL, default:none, required

httpcert = file
    file for http SSL certificate, default:oscam.pem

httpforcesslv3 = 0|1
    1 = force using SSLv3, default:0

httpuser = username
    username for password protection, default:none

httppwd = password
    password for password protection, default:none

httpcss = path
    path for external CSS file, default:none

http_prepend_embedded_css = 0|1
    1 = embedded CSS will be added before external CSS , default:0

httptpl = path
    path for external templates and picons, multiple simultaneously templates and picons are possible by creating sub folders (maximum length of 32 alphanumeric characters), sub folders naming is corresponding to sub folder in URL, default:none

     example: httptpl = /this/is/my/path

              folder with multiple templates:
                /this/is/my/path/template1
                /this/is/my/path/template2

              valid URLs:
               http://host:port/template1
               http://host:port/template2

httpjscript = path
    path for oscam.js javascript, default:none

httprefresh = seconds
    status refresh in seconds, default:none

httphideidleclients = 0|1
    1 = enables hiding clients after idle time set in parameter hideclient_to, default:0

httphidetype = type[type]...
    characters defining columns to hide in web interface status page (see type column), default:none

     types:

     'c': client
     'h': http
     'm': monitor
     'p': proxy
     'r': reader
     's': server
     'x': cache exchange

httpscript = path
    path to an executable script which you wish to start from web interface, default:none

httpallowed = IP address|IP address range[,IP address|IP address range]...
    http web interface connections allowed, default:127.0.0.1,192.168.0.0-192.168.255.255,10.0.0.0-10.255.255.255,::1

     example: httpallowed = 127.0.0.1,192.168.0.0-192.168.255.255

httpdyndns = hostname[,hostname][,hostname]
    http web interface connections allowed, default:none

     example: httpdyndns = host.example.com
              httpdyndns = host1.example.com,host2.example.com

httpsavefullcfg = 0|1
    write config:

     0 = all not empty parameters, all not default parameters, all
         parameters not containing the same value as the same
         parameter in global configuration (default)
     1 = all parameters

httpoverwritebakfile = 0|1
    1 = overwrite backup configuration files, default:0

httpreadonly = 0|1
    1 = read only modus for web interface, default:0

httpshowpicons = 0|1
    1 = show picons in user list, default:0

httppiconpath = path
    path to picons, default:none

httphelplang = en|de|fr|<available wiki languages>
    set right language for wiki entry point, default:en

httplocale = environment
    set the locale environment, default:none

  The [lcd] section

httposcamlabel = text
    set individual label in web interface header, default:OSCam

enablelcd = 0|1
    1 =enable LCD output, default:0

lcd_outputpath = path
    path for LCD output, default:/tmp

lcd_hideidle = 0|1
    1 = hide reader in LCD output if reader idle > 20 seconds, default:0

lcd_writeintervall = seconds
    LCD refresh interval (minimum 5), default:10

  The [cache] section
delay = milli-seconds
    value to delay cached requests, default:0

max_time = seconds
    maximum time CWs resist in cache, the time must be 2 seconds highter than the parameter clienttimeout, default:15

max_hit_time = seconds
    maximum time for cache exchange hits resist in cache for evaluating wait_time, default:15

wait_time = [caid][&mask][@provid][$servid][:awtime][:]dwtime[,[caid][&mask][@provid][$servid][:awtime][:]dwtime]...
    wait time in milli-seconds for cache exchange and Cardservproxy before sending ECMs to reader or proxy, default:none

     example: wait_time = 0:50:250,0200@00009X:50:150,15:950,0500@000001:150,1602&ffdf:1200

cacheexenablestats = 0|1
    1 = enable statistics for cache exchange mode, default:0

    Please consider memory consumption.

cacheex_cw_check = [caid][&mask][@provid][$servid]:mode:counter[,[caid][&mask][@provid][$servid]:mode:counter]...

     mode = specify behaviour for counter:

            0 = when wait_time expires, serve highest counter's CW
                got anyway, even if no counter reached (default)
            1 = never serve CW from cache exchange stored in cache,
                if it's counter not reaches counter. When wait_time
                expires, requests will go to normal readers

     counter = set minimum CW counter to allow CW is used, default:1

cacheex_mode1_delay = CAID1:time,[BCAID2:time]...
    delay in milli-seconds for asking cache exchange mode 1 readers, default:none

csp_port = port
    UDP port of Cardservproxy for cache exchange, default:none

csp_serverip = IP
    bind Cardservproxy for cache exchange to specified IP address, default:none

csp_ecm_filter = [caid][&mask][@provid][$servid][,[caid][&mask][@provid][$servid]]...
    Cardservproxy incoming ECM filter setting, default:none

csp_allow_request = 0|1
    allow incoming ECM request from Cardservproxy, default:1

csp_allow_reforward = 0|1
    1 = reforward other cacheex updates to Cardservproxy peers, option could cause loops, default:0

cwcycle_check_enable = 0|1
    1 = enable CW cycle check, default:0

cwcycle_check_caid = CAID[,CAID]...
    CAID enabled for CW cycle check, default:none

cwcycle_maxlist = count
    maximum CW cycle list entries, default:500, maximum:4000

cwcycle_keeptime = minutes
    minimum time a learned cycle time resists in memory, default:15, maximum:15

cwcycle_onbad = 0|1
    0 = log bad CW cycle only, 1 = drop bad CW cycle, default:1

cwcycle_dropold = 0|1
    1= drop old CW cycle, default:1

cwcycle_sensitive = 0|2|3|4
    drop CW mode:

     0 = disabled
     2 = 2 (or more) same bytes and drop new CW
     3 = 3 (or more) same bytes and drop new CW
     4 = 4 (or more) same bytes and drop new CW (default)

cwcycle_allowbadfromffb = 0|1
    1 = allow bad cycles from a fixed fallback reader, default:0

cwcycle_usecwcfromce = 0|1
    1 = use CW info from cache exchange, default:0

wait_until_ctimeout = 0|1
    answer when cache exchange timeout expires, if no normal readers are available for sending ECMs:

     0 = immediately send 'not found' to client (default)
     1 = wait for cache exchange answer until client timeout expires

  The [camd33] section
port = 0|port
    TCP port for camd 3.3x clients, 0 = disabled, default:0

serverip = IP address
    bind service to specified IP address, default:all

nocrypt = IP address|IP address range[,IP address|IP address range]...
    unsecured camd 3.3x client connection, default:none

     example: nocrypt = 127.0.0.1,192.168.0.0-192.168.255.255

passive = 0|1
    1 = force passive camd 3.3x client, default:0

key = 128 bit key
    key for camd 3.3x client encryption, default:none

     example: key = 01020304050607080910111213141516

  The [cs357x] section

port = 0|port
    UDP port for camd 3.57x clients, 0 = disabled, default:0

serverip = IP address
    bind service to specified IP address, default:all

suppresscmd08 = 0|1
    0 = tell camd 3.5x / 3.57x clients not to request again for rejected CAID, service ID and provider ID combination, 1 = disable, can be overwritten per user in oscam.user, default:0

  The [cs378x] section

port = 0|port[@CAID][:provid][,provid]...[;port@CAID[:provid][,provid]...]...
    TCP port/CAID/provid definitions for camd 3.78x clients, 0 = disabled, default:0

     examples: port = 10000@0100:100000;20000@0200:200000,300000,400000
               port = 30000

serverip = IP address
    bind service to specified IP address, default:all

keepalive = 0|1
    0 = disable camd 3.78x keepalive modus, default:0

suppresscmd08 = 0|1
    0 = tell camd 3.78x clients not to request again for rejected CAID, service ID and provider ID combination, 1 = disable, can be overwritten per user in oscam.user, default:0

  The [newcamd] section

key = DES key
    default key for newcamd client encryption, default:none

     example: key = 0102030405060708091011121314

port = port[{DES key}]@CAID[:provid][,provid]...[;port[{DES key}]@CAID[:provid][,provid]...]...
    TCP port/DES key/CAID/provid definitions, default:none

     example: port = 10000@0100:100000;20000{0102030405060708091011121314}@0200:200000,300000

    Each CAID requires a separate port. If you don't specify a DES key for a port, the default DES key will be used.

serverip = IP address
    bind newcamd service to specified IP address, default:all

allowed = IP address|IP address range[,IP address|IP address range]...
    newcamd client connections allowed from, default:none

     example: allowed = 127.0.0.1,192.168.0.0-192.168.255.255,::1

keepalive = 0|1
    0 = disable newcamd keepalive modus, default:0

mgclient = 0|1
    1 = provide share information of all available CAIDs and provider IDs to mgcamd clients, default:0

  The [radegast] section

port = 0|port
    TCP/IP port for radegast clients, 0 = disabled, default:0

serverip = IP address
    bind service to specified IP address, default:all

allowed = IP address|IP address range[,IP address|IP address range]...
    client connections allowed from, default:none

     example: allowed = 127.0.0.1,192.168.0.0-192.168.255.255

user = username
    user name for radegast client

  The [serial] section

device = <user>@<device>[:baud][?option1=value1[&option2=value2]...]
         [;<user>@<device>[:baud][?option1=value1[&option2=value2]...]]...

    parameters:
     user = account
     device = serial device name|hostname|IP,port
     baud = serial port speed (for serial devices only)
     option = timeout = milli-seconds, timeout for connection,
                        default:50
              delay = milli-seconds, additional delay between two
                        characters, default:0

    supported serial devices (autodection):
     HSIC (humax sharing interface client)
     SSSP (simple serial sharing protocol)
     bomba (BOMBA firmware)
     dsr9500 (DSR 9500)

     example: user1@/dev/ttyS1:115200?delay=1&timeout=5000
              user2@192.160.0.1,12345?delay=1&timeout=5000

  The [cccam] section

port = 0|port[,0|port]...
    TCP/IP ports for CCcam clients, 0 = disabled, default:0

version = <main version>.<version>.<sub version>
    define CCcam version, minimum CCcam version 2.0.11, used with original CCcam only, default:none

     example: version = 1.2.34

reshare = level
    reshare level for CCcam clients (default:10):

    -1 = no resharing
     0 = resharing for direct peer only
     1 = resharing for direct peer and next level
     x = resharing for direct peer and next x level

reshare_mode = mode
    CCcam reshare mode:

     0 = reader reshares only received SCs for CCcam readers,
         defined filters/CAIDs/provids on other readers
     1 = reader reshares received SCs (like=0) and defined services
     2 = reader reshares only defined reader services as virtual SCs
     3 = reader reshares only defined user services as virtual SCs
     4 = reader reshares only received SCs (default)

    Every server is shared as hop = 0 and with defined reshare values.

    Service reshare only works if positive services defined: no service - no reshare!

ignorereshare = 0|1
    CCcam reshare setting:

     0 = use reshare setting of server (default)
     1 = use reshare setting of reader or user

stealth = 0|1
    1 = behaviour like the original CCcam: no activate partner detection and extended OSCam-CCcam protocol, prevent other OSCam to detect the server as OSCam server, default:0

minimizecards = mode
    mode how to provide CCcam servers to CCcam clients:

     0 = no aggregation, remove duplicates only (default)
     1 = based on minimum hop: two SCs with different hops are
         summarized, new SCs get a smaller hop
     2 = aggregation based on CAIDs: all SCs with the same CAIDs
         will be merged, provider (maximum 32) will be merged, too

updateinterval = seconds
    interval to provide share list update to CCcam clients, values <= 10 are invalid and will be set to 30, default:240

keepconnected = 0|1
    set CCcam keepalive modus:

      0 = disconnect client when maximum idle time is reached
      1 = keep client connected (default)

recv_timeout = milli-seconds
    set network timeout for receiving data, default:2000

forward_origin_card = 0|1
    1 = forward ECM request to reader holding this card, load balancer, fallback and caching will be disabled, default:0

nodeid = ID
    set CCcam node ID in hex, default:none

     example: nodeid = 0a0b0c0d0e0f1011

  The [gbox] section

hostname = hostname| IP address
    set hostname or IP address for gbox protocol, default:none

port = port[,port]...
    UDP port for gbox server, default:0

my_password = password
    password for connection to local gbox peer, default:none

proxy_card = <CAID><provid>[,<CAID><provid>]...
    proxy reader SCs to be reshared into gbox network, default:none

ccc_reshare = 0|1
    1 = enable CCCam reshare, default:0

my_vers = version
    set gbox version in hexadecimal low byte, default:25

my_cpu_api = byte
    set gbox CPU and API byte in hexadecimal, default:40

gbox_reconnect = time
    send message to peers in seconds, default:300

gsms_disable = 0|1
    1 = disable gbox short message service (GSMS),default:0

    sending a messeage: /tmp/gsms.txt: <box ID> <1=mormal message|2=OSD/TV message> <message 6 to 127 characters>, status will be stored in '/tmp/gsms.ack' respective 'gsms.nack', receiving a message: The message will be stored in /tmp/gsms.log

tmp_dir = path
    temporary directory for gbox, default:/tmp/.oscam

  The [scam] section

port = port
    UDP port for scam server, default:0

  The [dvbapi] section

enabled = 0|1
    1 = DVB API enabled, default:0

    Create file /tmp/.pauseoscam to pause DVB API, e.g. if STB goes into standby and OSCam remains as SC server only.

listen_port = 0|port
    TCP/IP port for SAT IP clients, filtering has to be done on client site, 0 = disabled, default:0

user = username
    user name for DVB API client, default:anonymous

ignore = <CAID>[,<CAID>]... (detached by oscam.dvbapi, obsolete)
    CAIDs to be ignored, default:none

services = <service ID>[,<service ID>]... (detached by oscam.dvbapi, obsolete)
    services to be prioritized, default:none

priority = <CAID>:<provider ID>[,CAID:<provider ID>]... (detached by oscam.dvbapi, obsolete)
    CAIDs and provider IDs to be prioritized, default:CAIDs and provider IDs of local SCs will be prioritized

au = 0|1|2
    AU mode:

     0 = disable AU (default)
     1 = enable AU

pmt_mode = 0|1|2|3|4|5
    PMT mode:

     0 = use camd.socket and PMT file, default
     1 = disable reading PMT file
     2 = disable camd.socket
     3 = read PMT file on startup only
     4 = do not use signal handler for monitoring /tmp
     5 = do not use signal handler for monitoring /tmp,
         disable camd.socket

ecminfo_type = 0|1|2|3|4|5
    ecm.info types:

     0 = OSCam syntax (default)
     1 = OSCam syntax with ECM time in ms instead of seconds
     2 = WiCardd
     3 = mgcamd
     4 = CCcam
     5 = camd3

request_mode = 0|1
    CAID request mode:

     0 = try all possible CAIDs one by one (default)
     1 = try all CAIDs simultaneously

boxtype = dbox2|dreambox|dm7000|duckbox|ufs910|ipbox|ipbox-pmt|qboxhd|coolstream|neumo|samygo|pc
    set boxtype, auto detection of DVB API will be aspired, default:dreambox

    ipbox with camd.socket support, currently only with PGI image version 0.6 or above, verified on HD models only

    ipbox-pmt can be used on any DGS based images (with or without camd.socket support), verified on HD models only

    pc is for generic pc support (currently supported on VDR with vdr-plugin-dvbapi)

read_sdt = 0|1|2
    mode of provider, channel name and service type auto detection via SDT:

     0 = disabled (default)
     1 = enabled for non FTA channels only
     2 = enabled for all channels

write_sdt_prov = 0|1
    mode writing provider name into oscam.srvid2 file:

     0 = disabled (default)
     1 = enabled

cw_delay = milli-seconds
    delay of CW writing, default:none

delayer = milli-seconds
    minimum time to write CW, default:0

reopenonzap = 0|1
    1 = reopen demux devices on each channel switching, default:0

  The [anticasc] section

enabled = 0|1
    1 = enable anti-cascading, default:0

numusers = quantity
    anti-cascading: user per account, 0 = anti-cascading disabled, default:0

sampletime = minutes
    duration of sample, default:2

samples = quantity
    quantity of samples over limit, default:10

penalty = 0|1|2|3
    level of penalty:

     0 = only logging (default)
     1 = send fake CWs
     2 = temporary user ban
     3 = send delayed CWs

    penalty can be overwritten per user in oscam.user.

aclogfile = filename
    file for anti-cascading logging, default:none

fakedelay = milli-seconds
    fake delay time, default:1000, minimum value is 100, maximum value is 3000

denysamples = quantity
    how many samples should be penalized, default:8

acosc_enabled = 0|1
    1 = enable anti-cascading over SID count, default:0

acosc_max_active_sids = count
    maximum active SIDs with anti-cascading over SID, 0 = unlimited, default:0

    Can be overwritten per user in oscam.user.

acosc_zap_limit = count
    zap limit for anti-cascading over SID, 0 = unlimited, default:0

    Can be overwritten per user in oscam.user.

acosc_penalty = 0|1|2|3
    level of penalty with anti-cascading over SID count:

     0 = only logging (default)
     1 = send fake CWs
     2 = temporary user ban
     3 = send delayed CWs

    Can be overwritten per user in oscam.user.

acosc_penalty_duration = seconds
    penalty duration for anti-cascading over SID count, default:0

    Can be overwritten per user in oscam.user.

acosc_delay = milli-seconds
    delay for anti-cascading over SID count, default:0

    Can be overwritten per user in oscam.user.

LOGGING

•   reader stages

     1 = cacheex (=1) reader (C)
     2 = local SCs (L)
     3 = other reader / proxies (P)
     4 = fallback reader (F)

•   logging format

     stage/used/chosen/possible

MONITOR

monitor commands:

•   login <user> <password>

    login (for unencrypted connections only)

•   getuser <user> <parameter>=<value>

    get parameter for user

•   setuser <user> <parameter>=<value>

    set parameter for user

•   setserver <parameter>=<value>

    set parameter for server

•   exit

    exit monitor

•   log <on|onwohist|off>

    enable|enable without hitory|disable logging for 2 minutes

•   status

    list of current processes and clients

•   shutdown

    shutdown OSCam

•   restart

    restart OSCam

•   keepalive

    send keepalive

•   reload

    reinit user db, clients and anti-cascading, for newcamd connections: after reloading the provid, please restart newcamd client

•   details <PID>

    details about selected PID

•   reread

    read again

•   debug <level>

    set debug level (monlevel > 3 required)

    debug level mask:
         0 = no debugging (default)
         1 = detailed error messages
         2 = ATR parsing info, ECM dumps, CW dumps
         4 = traffic from/to the reader
         8 = traffic from/to the clients
        16 = traffic to the reader-device on IFD layer
        32 = traffic to the reader-device on I/O layer
        64 = EMM logging
       128 = DVB API logging
       256 = load balacing logging
       512 = cache exchange logging
      1024 = client ECM logging
     65535 = debug all

•   version

    show OSCam version

•   commands

    show all valid monitor commands

WEB INTERFACE

•   template system

    The web interface allows you to create your own template. For developing your own template request the orignal template with the non-linked page savetemplates.html. Store your own template in the directory specified by httptpl.

CACHING
types of ECM caching:

•   cache1

    ECM and CW in cache already.

•   cache2

    ECM and checksum in cache already.

SEE ALSO
list_smargo(1), oscam(1), oscam.ac(5), oscam.cacheex(5), oscam.cert(5), oscam.dvbapi(5), oscam.fakecws(5), oscam.guess(5), oscam.ird(5), oscam.provid(5), oscam.ratelimit(5), oscam.server(5), oscam.services(5), oscam.srvid(5), oscam.srvid2(5), oscam.tiers(5), oscam.user(5), oscam.whitelist(5)