This is bash.info, produced by makeinfo version 4.13 from
/OE/angstrom-2008/build/tmp-angstrom_2008_1/work/armv5te-angstrom-linux-gnueabi/bash-3.2-r12/bash-3.2/doc/bashref.texi.

This text is a brief description of the features that are present in
the Bash shell (version 3.2, 28 September 2006).

   This is Edition 3.2, last updated 28 September 2006, of `The GNU
Bash Reference Manual', for `Bash', Version 3.2.

   Copyright (C) 1988-2005 Free Software Foundation, Inc.

   Permission is granted to make and distribute verbatim copies of this
manual provided the copyright notice and this permission notice are
preserved on all copies.

     Permission is granted to copy, distribute and/or modify this
     document under the terms of the GNU Free Documentation License,
     Version 1.2 or any later version published by the Free Software
     Foundation; with no Invariant Sections, with the Front-Cover texts
     being "A GNU Manual," and with the Back-Cover Texts as in (a)
     below.  A copy of the license is included in the section entitled
     "GNU Free Documentation License."

     (a) The FSF's Back-Cover Text is: "You have freedom to copy and
     modify this GNU Manual, like GNU software.  Copies published by
     the Free Software Foundation raise funds for GNU development."

INFO-DIR-SECTION Basics
START-INFO-DIR-ENTRY
* Bash: (bash).                     The GNU Bourne-Again SHell.
END-INFO-DIR-ENTRY


File: bash.info,  Node: Top,  Next: Introduction,  Prev: (dir),  Up: (dir)

Bash Features
*************

This text is a brief description of the features that are present in
the Bash shell (version 3.2, 28 September 2006).

   This is Edition 3.2, last updated 28 September 2006, of `The GNU
Bash Reference Manual', for `Bash', Version 3.2.

   Bash contains features that appear in other popular shells, and some
features that only appear in Bash.  Some of the shells that Bash has
borrowed concepts from are the Bourne Shell (`sh'), the Korn Shell
(`ksh'), and the C-shell (`csh' and its successor, `tcsh'). The
following menu breaks the features up into categories based upon which
one of these other shells inspired the feature.

   This manual is meant as a brief introduction to features found in
Bash.  The Bash manual page should be used as the definitive reference
on shell behavior.

* Menu:

* Introduction::		An introduction to the shell.
* Definitions::			Some definitions used in the rest of this
				manual.
* Basic Shell Features::	The shell "building blocks".
* Shell Builtin Commands::	Commands that are a part of the shell.
* Shell Variables::		Variables used or set by Bash.
* Bash Features::		Features found only in Bash.
* Job Control::			What job control is and how Bash allows you
				to use it.
* Using History Interactively::	Command History Expansion
* Command Line Editing::	Chapter describing the command line
				editing features.
* Installing Bash::		How to build and install Bash on your system.
* Reporting Bugs::		How to report bugs in Bash.
* Major Differences From The Bourne Shell::	A terse list of the differences
						between Bash and historical
						versions of /bin/sh.
* Copying This Manual::		Copying this manual.
* Builtin Index::		Index of Bash builtin commands.
* Reserved Word Index::		Index of Bash reserved words.
* Variable Index::		Quick reference helps you find the
				variable you want.
* Function Index::		Index of bindable Readline functions.
* Concept Index::		General index for concepts described in
				this manual.


File: bash.info,  Node: Introduction,  Next: Definitions,  Prev: Top,  Up: Top

1 Introduction
**************

* Menu:

* What is Bash?::		A short description of Bash.
* What is a shell?::		A brief introduction to shells.


File: bash.info,  Node: What is Bash?,  Next: What is a shell?,  Up: Introduction

1.1 What is Bash?
=================

Bash is the shell, or command language interpreter, for the GNU
operating system.  The name is an acronym for the `Bourne-Again SHell',
a pun on Stephen Bourne, the author of the direct ancestor of the
current Unix shell `sh', which appeared in the Seventh Edition Bell
Labs Research version of Unix.

   Bash is largely compatible with `sh' and incorporates useful
features from the Korn shell `ksh' and the C shell `csh'.  It is
intended to be a conformant implementation of the IEEE POSIX Shell and
Tools portion of the IEEE POSIX specification (IEEE Standard 1003.1).
It offers functional improvements over `sh' for both interactive and
programming use.

   While the GNU operating system provides other shells, including a
version of `csh', Bash is the default shell.  Like other GNU software,
Bash is quite portable.  It currently runs on nearly every version of
Unix and a few other operating systems - independently-supported ports
exist for MS-DOS, OS/2, and Windows platforms.


File: bash.info,  Node: What is a shell?,  Prev: What is Bash?,  Up: Introduction

1.2 What is a shell?
====================

At its base, a shell is simply a macro processor that executes
commands.  The term macro processor means functionality where text and
symbols are expanded to create larger expressions.

   A Unix shell is both a command interpreter and a programming
language.  As a command interpreter, the shell provides the user
interface to the rich set of GNU utilities.  The programming language
features allow these utilitites to be combined.  Files containing
commands can be created, and become commands themselves.  These new
commands have the same status as system commands in directories such as
`/bin', allowing users or groups to establish custom environments to
automate their common tasks.

   Shells may be used interactively or non-interactively.  In
interactive mode, they accept input typed from the keyboard.  When
executing non-interactively, shells execute commands read from a file.

   A shell allows execution of GNU commands, both synchronously and
asynchronously.  The shell waits for synchronous commands to complete
before accepting more input; asynchronous commands continue to execute
in parallel with the shell while it reads and executes additional
commands.  The "redirection" constructs permit fine-grained control of
the input and output of those commands.  Moreover, the shell allows
control over the contents of commands' environments.

   Shells also provide a small set of built-in commands ("builtins")
implementing functionality impossible or inconvenient to obtain via
separate utilities.  For example, `cd', `break', `continue', and
`exec') cannot be implemented outside of the shell because they
directly manipulate the shell itself.  The `history', `getopts',
`kill', or `pwd' builtins, among others, could be implemented in
separate utilities, but they are more convenient to use as builtin
commands.  All of the shell builtins are described in subsequent
sections.

   While executing commands is essential, most of the power (and
complexity) of shells is due to their embedded programming languages.
Like any high-level language, the shell provides variables, flow
control constructs, quoting, and functions.

   Shells offer features geared specifically for interactive use rather
than to augment the programming language.  These interactive features
include job control, command line editing, command history and aliases.
Each of these features is described in this manual.


File: bash.info,  Node: Definitions,  Next: Basic Shell Features,  Prev: Introduction,  Up: Top

2 Definitions
*************

These definitions are used throughout the remainder of this manual.

`POSIX'
     A family of open system standards based on Unix.  Bash is
     primarily concerned with the Shell and Utilities portion of the
     POSIX 1003.1 standard.

`blank'
     A space or tab character.

`builtin'
     A command that is implemented internally by the shell itself,
     rather than by an executable program somewhere in the file system.

`control operator'
     A `word' that performs a control function.  It is a `newline' or
     one of the following: `||', `&&', `&', `;', `;;', `|', `(', or `)'.

`exit status'
     The value returned by a command to its caller.  The value is
     restricted to eight bits, so the maximum value is 255.

`field'
     A unit of text that is the result of one of the shell expansions.
     After expansion, when executing a command, the resulting fields
     are used as the command name and arguments.

`filename'
     A string of characters used to identify a file.

`job'
     A set of processes comprising a pipeline, and any processes
     descended from it, that are all in the same process group.

`job control'
     A mechanism by which users can selectively stop (suspend) and
     restart (resume) execution of processes.

`metacharacter'
     A character that, when unquoted, separates words.  A metacharacter
     is a `blank' or one of the following characters: `|', `&', `;',
     `(', `)', `<', or `>'.

`name'
     A `word' consisting solely of letters, numbers, and underscores,
     and beginning with a letter or underscore.  `Name's are used as
     shell variable and function names.  Also referred to as an
     `identifier'.

`operator'
     A `control operator' or a `redirection operator'.  *Note
     Redirections::, for a list of redirection operators.

`process group'
     A collection of related processes each having the same process
     group ID.

`process group ID'
     A unique identifer that represents a `process group' during its
     lifetime.

`reserved word'
     A `word' that has a special meaning to the shell.  Most reserved
     words introduce shell flow control constructs, such as `for' and
     `while'.

`return status'
     A synonym for `exit status'.

`signal'
     A mechanism by which a process may be notified by the kernel of an
     event occurring in the system.

`special builtin'
     A shell builtin command that has been classified as special by the
     POSIX standard.

`token'
     A sequence of characters considered a single unit by the shell.
     It is either a `word' or an `operator'.

`word'
     A `token' that is not an `operator'.


File: bash.info,  Node: Basic Shell Features,  Next: Shell Builtin Commands,  Prev: Definitions,  Up: Top

3 Basic Shell Features
**********************

Bash is an acronym for `Bourne-Again SHell'.  The Bourne shell is the
traditional Unix shell originally written by Stephen Bourne.  All of
the Bourne shell builtin commands are available in Bash, The rules for
evaluation and quoting are taken from the POSIX specification for the
`standard' Unix shell.

   This chapter briefly summarizes the shell's `building blocks':
commands, control structures, shell functions, shell parameters, shell
expansions, redirections, which are a way to direct input and output
from and to named files, and how the shell executes commands.

* Menu:

* Shell Syntax::		What your input means to the shell.
* Shell Commands::		The types of commands you can use.
* Shell Functions::		Grouping commands by name.
* Shell Parameters::		How the shell stores values.
* Shell Expansions::		How Bash expands parameters and the various
				expansions available.
* Redirections::		A way to control where input and output go.
* Executing Commands::		What happens when you run a command.
* Shell Scripts::		Executing files of shell commands.


File: bash.info,  Node: Shell Syntax,  Next: Shell Commands,  Up: Basic Shell Features

3.1 Shell Syntax
================

* Menu:

* Shell Operation::	The basic operation of the shell.
* Quoting::		How to remove the special meaning from characters.
* Comments::		How to specify comments.

   When the shell reads input, it proceeds through a sequence of
operations.  If the input indicates the beginning of a comment, the
shell ignores the comment symbol (`#'), and the rest of that line.

   Otherwise, roughly speaking,  the shell reads its input and divides
the input into words and operators, employing the quoting rules to
select which meanings to assign various words and characters.

   The shell then parses these tokens into commands and other
constructs, removes the special meaning of certain words or characters,
expands others, redirects input and output as needed, executes the
specified command, waits for the command's exit status, and makes that
exit status available for further inspection or processing.


File: bash.info,  Node: Shell Operation,  Next: Quoting,  Up: Shell Syntax

3.1.1 Shell Operation
---------------------

The following is a brief description of the shell's operation when it
reads and executes a command.  Basically, the shell does the following:

  1. Reads its input from a file (*note Shell Scripts::), from a string
     supplied as an argument to the `-c' invocation option (*note
     Invoking Bash::), or from the user's terminal.

  2. Breaks the input into words and operators, obeying the quoting
     rules described in *note Quoting::.  These tokens are separated by
     `metacharacters'.  Alias expansion is performed by this step
     (*note Aliases::).

  3. Parses the tokens into simple and compound commands (*note Shell
     Commands::).

  4. Performs the various shell expansions (*note Shell Expansions::),
     breaking the expanded tokens into lists of filenames (*note
     Filename Expansion::) and commands and arguments.

  5. Performs any necessary redirections (*note Redirections::) and
     removes the redirection operators and their operands from the
     argument list.

  6. Executes the command (*note Executing Commands::).

  7. Optionally waits for the command to complete and collects its exit
     status (*note Exit Status::).



File: bash.info,  Node: Quoting,  Next: Comments,  Prev: Shell Operation,  Up: Shell Syntax

3.1.2 Quoting
-------------

* Menu:

* Escape Character::	How to remove the special meaning from a single
			character.
* Single Quotes::	How to inhibit all interpretation of a sequence
			of characters.
* Double Quotes::	How to suppress most of the interpretation of a
			sequence of characters.
* ANSI-C Quoting::	How to expand ANSI-C sequences in quoted strings.
* Locale Translation::	How to translate strings into different languages.

   Quoting is used to remove the special meaning of certain characters
or words to the shell.  Quoting can be used to disable special
treatment for special characters, to prevent reserved words from being
recognized as such, and to prevent parameter expansion.

   Each of the shell metacharacters (*note Definitions::) has special
meaning to the shell and must be quoted if it is to represent itself.
When the command history expansion facilities are being used (*note
History Interaction::), the HISTORY EXPANSION character, usually `!',
must be quoted to prevent history expansion.  *Note Bash History
Facilities::, for more details concerning history expansion.

   There are three quoting mechanisms: the ESCAPE CHARACTER, single
quotes, and double quotes.


File: bash.info,  Node: Escape Character,  Next: Single Quotes,  Up: Quoting

3.1.2.1 Escape Character
........................

A non-quoted backslash `\' is the Bash escape character.  It preserves
the literal value of the next character that follows, with the
exception of `newline'.  If a `\newline' pair appears, and the
backslash itself is not quoted, the `\newline' is treated as a line
continuation (that is, it is removed from the input stream and
effectively ignored).


File: bash.info,  Node: Single Quotes,  Next: Double Quotes,  Prev: Escape Character,  Up: Quoting

3.1.2.2 Single Quotes
.....................

Enclosing characters in single quotes (`'') preserves the literal value
of each character within the quotes.  A single quote may not occur
between single quotes, even when preceded by a backslash.


File: bash.info,  Node: Double Quotes,  Next: ANSI-C Quoting,  Prev: Single Quotes,  Up: Quoting

3.1.2.3 Double Quotes
.....................

Enclosing characters in double quotes (`"') preserves the literal value
of all characters within the quotes, with the exception of `$', ``',
`\', and, when history expansion is enabled, `!'.  The characters `$'
and ``' retain their special meaning within double quotes (*note Shell
Expansions::).  The backslash retains its special meaning only when
followed by one of the following characters: `$', ``', `"', `\', or
`newline'.  Within double quotes, backslashes that are followed by one
of these characters are removed.  Backslashes preceding characters
without a special meaning are left unmodified.  A double quote may be
quoted within double quotes by preceding it with a backslash.  If
enabled, history expansion will be performed unless an `!' appearing in
double quotes is escaped using a backslash.  The backslash preceding
the `!' is not removed.

   The special parameters `*' and `@' have special meaning when in
double quotes (*note Shell Parameter Expansion::).


File: bash.info,  Node: ANSI-C Quoting,  Next: Locale Translation,  Prev: Double Quotes,  Up: Quoting

3.1.2.4 ANSI-C Quoting
......................

Words of the form `$'STRING'' are treated specially.  The word expands
to STRING, with backslash-escaped characters replaced as specified by
the ANSI C standard.  Backslash escape sequences, if present, are
decoded as follows:

`\a'
     alert (bell)

`\b'
     backspace

`\e'
     an escape character (not ANSI C)

`\f'
     form feed

`\n'
     newline

`\r'
     carriage return

`\t'
     horizontal tab

`\v'
     vertical tab

`\\'
     backslash

`\''
     single quote

`\NNN'
     the eight-bit character whose value is the octal value NNN (one to
     three digits)

`\xHH'
     the eight-bit character whose value is the hexadecimal value HH
     (one or two hex digits)

`\cX'
     a control-X character

The expanded result is single-quoted, as if the dollar sign had not
been present.


File: bash.info,  Node: Locale Translation,  Prev: ANSI-C Quoting,  Up: Quoting

3.1.2.5 Locale-Specific Translation
...................................

A double-quoted string preceded by a dollar sign (`$') will cause the
string to be translated according to the current locale.  If the
current locale is `C' or `POSIX', the dollar sign is ignored.  If the
string is translated and replaced, the replacement is double-quoted.

   Some systems use the message catalog selected by the `LC_MESSAGES'
shell variable.  Others create the name of the message catalog from the
value of the `TEXTDOMAIN' shell variable, possibly adding a suffix of
`.mo'.  If you use the `TEXTDOMAIN' variable, you may need to set the
`TEXTDOMAINDIR' variable to the location of the message catalog files.
Still others use both variables in this fashion:
`TEXTDOMAINDIR'/`LC_MESSAGES'/LC_MESSAGES/`TEXTDOMAIN'.mo.


File: bash.info,  Node: Comments,  Prev: Quoting,  Up: Shell Syntax

3.1.3 Comments
--------------

In a non-interactive shell, or an interactive shell in which the
`interactive_comments' option to the `shopt' builtin is enabled (*note
Bash Builtins::), a word beginning with `#' causes that word and all
remaining characters on that line to be ignored.  An interactive shell
without the `interactive_comments' option enabled does not allow
comments.  The `interactive_comments' option is on by default in
interactive shells.  *Note Interactive Shells::, for a description of
what makes a shell interactive.


File: bash.info,  Node: Shell Commands,  Next: Shell Functions,  Prev: Shell Syntax,  Up: Basic Shell Features

3.2 Shell Commands
==================

A simple shell command such as `echo a b c' consists of the command
itself followed by arguments, separated by spaces.

   More complex shell commands are composed of simple commands arranged
together in a variety of ways: in a pipeline in which the output of one
command becomes the input of a second, in a loop or conditional
construct, or in some other grouping.

* Menu:

* Simple Commands::		The most common type of command.
* Pipelines::			Connecting the input and output of several
				commands.
* Lists::			How to execute commands sequentially.
* Compound Commands::		Shell commands for control flow.


File: bash.info,  Node: Simple Commands,  Next: Pipelines,  Up: Shell Commands

3.2.1 Simple Commands
---------------------

A simple command is the kind of command encountered most often.  It's
just a sequence of words separated by `blank's, terminated by one of
the shell's control operators (*note Definitions::).  The first word
generally specifies a command to be executed, with the rest of the
words being that command's arguments.

   The return status (*note Exit Status::) of a simple command is its
exit status as provided by the POSIX 1003.1 `waitpid' function, or
128+N if the command was terminated by signal N.


File: bash.info,  Node: Pipelines,  Next: Lists,  Prev: Simple Commands,  Up: Shell Commands

3.2.2 Pipelines
---------------

A `pipeline' is a sequence of simple commands separated by `|'.

   The format for a pipeline is
     [`time' [`-p']] [`!'] COMMAND1 [`|' COMMAND2 ...]

The output of each command in the pipeline is connected via a pipe to
the input of the next command.  That is, each command reads the
previous command's output.

   The reserved word `time' causes timing statistics to be printed for
the pipeline once it finishes.  The statistics currently consist of
elapsed (wall-clock) time and user and system time consumed by the
command's execution.  The `-p' option changes the output format to that
specified by POSIX.  The `TIMEFORMAT' variable may be set to a format
string that specifies how the timing information should be displayed.
*Note Bash Variables::, for a description of the available formats.
The use of `time' as a reserved word permits the timing of shell
builtins, shell functions, and pipelines.  An external `time' command
cannot time these easily.

   If the pipeline is not executed asynchronously (*note Lists::), the
shell waits for all commands in the pipeline to complete.

   Each command in a pipeline is executed in its own subshell (*note
Command Execution Environment::).  The exit status of a pipeline is the
exit status of the last command in the pipeline, unless the `pipefail'
option is enabled (*note The Set Builtin::).  If `pipefail' is enabled,
the pipeline's return status is the value of the last (rightmost)
command to exit with a non-zero status, or zero if all commands exit
successfully.  If the reserved word `!' precedes the pipeline, the exit
status is the logical negation of the exit status as described above.
The shell waits for all commands in the pipeline to terminate before
returning a value.


File: bash.info,  Node: Lists,  Next: Compound Commands,  Prev: Pipelines,  Up: Shell Commands

3.2.3 Lists of Commands
-----------------------

A `list' is a sequence of one or more pipelines separated by one of the
operators `;', `&', `&&', or `||', and optionally terminated by one of
`;', `&', or a `newline'.

   Of these list operators, `&&' and `||' have equal precedence,
followed by `;' and `&', which have equal precedence.

   A sequence of one or more newlines may appear in a `list' to delimit
commands, equivalent to a semicolon.

   If a command is terminated by the control operator `&', the shell
executes the command asynchronously in a subshell.  This is known as
executing the command in the BACKGROUND.  The shell does not wait for
the command to finish, and the return status is 0 (true).  When job
control is not active (*note Job Control::), the standard input for
asynchronous commands, in the absence of any explicit redirections, is
redirected from `/dev/null'.

   Commands separated by a `;' are executed sequentially; the shell
waits for each command to terminate in turn.  The return status is the
exit status of the last command executed.

   The control operators `&&' and `||' denote AND lists and OR lists,
respectively.  An AND list has the form
     COMMAND1 && COMMAND2

COMMAND2 is executed if, and only if, COMMAND1 returns an exit status
of zero.

   An OR list has the form
     COMMAND1 || COMMAND2

COMMAND2 is executed if, and only if, COMMAND1 returns a non-zero exit
status.

   The return status of AND and OR lists is the exit status of the last
command executed in the list.


File: bash.info,  Node: Compound Commands,  Prev: Lists,  Up: Shell Commands

3.2.4 Compound Commands
-----------------------

* Menu:

* Looping Constructs::		Shell commands for iterative action.
* Conditional Constructs::	Shell commands for conditional execution.
* Command Grouping::		Ways to group commands.

   Compound commands are the shell programming constructs.  Each
construct begins with a reserved word or control operator and is
terminated by a corresponding reserved word or operator.  Any
redirections (*note Redirections::) associated with a compound command
apply to all commands within that compound command unless explicitly
overridden.

   Bash provides looping constructs, conditional commands, and
mechanisms to group commands and execute them as a unit.


File: bash.info,  Node: Looping Constructs,  Next: Conditional Constructs,  Up: Compound Commands

3.2.4.1 Looping Constructs
..........................

Bash supports the following looping constructs.

   Note that wherever a `;' appears in the description of a command's
syntax, it may be replaced with one or more newlines.

`until'
     The syntax of the `until' command is:
          until TEST-COMMANDS; do CONSEQUENT-COMMANDS; done
     Execute CONSEQUENT-COMMANDS as long as TEST-COMMANDS has an exit
     status which is not zero.  The return status is the exit status of
     the last command executed in CONSEQUENT-COMMANDS, or zero if none
     was executed.

`while'
     The syntax of the `while' command is:
          while TEST-COMMANDS; do CONSEQUENT-COMMANDS; done

     Execute CONSEQUENT-COMMANDS as long as TEST-COMMANDS has an exit
     status of zero.  The return status is the exit status of the last
     command executed in CONSEQUENT-COMMANDS, or zero if none was
     executed.

`for'
     The syntax of the `for' command is:

          for NAME [in WORDS ...]; do COMMANDS; done
     Expand WORDS, and execute COMMANDS once for each member in the
     resultant list, with NAME bound to the current member.  If `in
     WORDS' is not present, the `for' command executes the COMMANDS
     once for each positional parameter that is set, as if `in "$@"'
     had been specified (*note Special Parameters::).  The return
     status is the exit status of the last command that executes.  If
     there are no items in the expansion of WORDS, no commands are
     executed, and the return status is zero.

     An alternate form of the `for' command is also supported:

          for (( EXPR1 ; EXPR2 ; EXPR3 )) ; do COMMANDS ; done
     First, the arithmetic expression EXPR1 is evaluated according to
     the rules described below (*note Shell Arithmetic::).  The
     arithmetic expression EXPR2 is then evaluated repeatedly until it
     evaluates to zero.  Each time EXPR2 evaluates to a non-zero value,
     COMMANDS are executed and the arithmetic expression EXPR3 is
     evaluated.  If any expression is omitted, it behaves as if it
     evaluates to 1.  The return value is the exit status of the last
     command in LIST that is executed, or false if any of the
     expressions is invalid.


   The `break' and `continue' builtins (*note Bourne Shell Builtins::)
may be used to control loop execution.


File: bash.info,  Node: Conditional Constructs,  Next: Command Grouping,  Prev: Looping Constructs,  Up: Compound Commands

3.2.4.2 Conditional Constructs
..............................

`if'
     The syntax of the `if' command is:

          if TEST-COMMANDS; then
            CONSEQUENT-COMMANDS;
          [elif MORE-TEST-COMMANDS; then
            MORE-CONSEQUENTS;]
          [else ALTERNATE-CONSEQUENTS;]
          fi

     The TEST-COMMANDS list is executed, and if its return status is
     zero, the CONSEQUENT-COMMANDS list is executed.  If TEST-COMMANDS
     returns a non-zero status, each `elif' list is executed in turn,
     and if its exit status is zero, the corresponding MORE-CONSEQUENTS
     is executed and the command completes.  If `else
     ALTERNATE-CONSEQUENTS' is present, and the final command in the
     final `if' or `elif' clause has a non-zero exit status, then
     ALTERNATE-CONSEQUENTS is executed.  The return status is the exit
     status of the last command executed, or zero if no condition
     tested true.

`case'
     The syntax of the `case' command is:

          `case WORD in [ [(] PATTERN [| PATTERN]...) COMMAND-LIST ;;]... esac'

     `case' will selectively execute the COMMAND-LIST corresponding to
     the first PATTERN that matches WORD.  If the shell option
     `nocasematch' (see the description of `shopt' in *note Bash
     Builtins::) is enabled, the match is performed without regard to
     the case of alphabetic characters.  The `|' is used to separate
     multiple patterns, and the `)' operator terminates a pattern list.
     A list of patterns and an associated command-list is known as a
     CLAUSE.  Each clause must be terminated with `;;'.  The WORD
     undergoes tilde expansion, parameter expansion, command
     substitution, arithmetic expansion, and quote removal before
     matching is attempted.  Each PATTERN undergoes tilde expansion,
     parameter expansion, command substitution, and arithmetic
     expansion.

     There may be an arbitrary number of `case' clauses, each terminated
     by a `;;'.  The first pattern that matches determines the
     command-list that is executed.

     Here is an example using `case' in a script that could be used to
     describe one interesting feature of an animal:

          echo -n "Enter the name of an animal: "
          read ANIMAL
          echo -n "The $ANIMAL has "
          case $ANIMAL in
            horse | dog | cat) echo -n "four";;
            man | kangaroo ) echo -n "two";;
            *) echo -n "an unknown number of";;
          esac
          echo " legs."

     The return status is zero if no PATTERN is matched.  Otherwise, the
     return status is the exit status of the COMMAND-LIST executed.

`select'
     The `select' construct allows the easy generation of menus.  It
     has almost the same syntax as the `for' command:

          select NAME [in WORDS ...]; do COMMANDS; done

     The list of words following `in' is expanded, generating a list of
     items.  The set of expanded words is printed on the standard error
     output stream, each preceded by a number.  If the `in WORDS' is
     omitted, the positional parameters are printed, as if `in "$@"'
     had been specifed.  The `PS3' prompt is then displayed and a line
     is read from the standard input.  If the line consists of a number
     corresponding to one of the displayed words, then the value of
     NAME is set to that word.  If the line is empty, the words and
     prompt are displayed again.  If `EOF' is read, the `select'
     command completes.  Any other value read causes NAME to be set to
     null.  The line read is saved in the variable `REPLY'.

     The COMMANDS are executed after each selection until a `break'
     command is executed, at which point the `select' command completes.

     Here is an example that allows the user to pick a filename from the
     current directory, and displays the name and index of the file
     selected.

          select fname in *;
          do
          	echo you picked $fname \($REPLY\)
          	break;
          done

`((...))'
          (( EXPRESSION ))

     The arithmetic EXPRESSION is evaluated according to the rules
     described below (*note Shell Arithmetic::).  If the value of the
     expression is non-zero, the return status is 0; otherwise the
     return status is 1.  This is exactly equivalent to
          let "EXPRESSION"
     *Note Bash Builtins::, for a full description of the `let' builtin.

`[[...]]'
          [[ EXPRESSION ]]

     Return a status of 0 or 1 depending on the evaluation of the
     conditional expression EXPRESSION.  Expressions are composed of
     the primaries described below in *note Bash Conditional
     Expressions::.  Word splitting and filename expansion are not
     performed on the words between the `[[' and `]]'; tilde expansion,
     parameter and variable expansion, arithmetic expansion, command
     substitution, process substitution, and quote removal are
     performed.  Conditional operators such as `-f' must be unquoted to
     be recognized as primaries.

     When the `==' and `!=' operators are used, the string to the right
     of the operator is considered a pattern and matched according to
     the rules described below in *note Pattern Matching::.  If the
     shell option `nocasematch' (see the description of `shopt' in
     *note Bash Builtins::) is enabled, the match is performed without
     regard to the case of alphabetic characters.  The return value is
     0 if the string matches (`==') or does not match (`!=')the
     pattern, and 1 otherwise.  Any part of the pattern may be quoted
     to force it to be matched as a string.

     An additional binary operator, `=~', is available, with the same
     precedence as `==' and `!='.  When it is used, the string to the
     right of the operator is considered an extended regular expression
     and matched accordingly (as in regex3)).  The return value is 0 if
     the string matches the pattern, and 1 otherwise.  If the regular
     expression is syntactically incorrect, the conditional
     expression's return value is 2.  If the shell option `nocasematch'
     (see the description of `shopt' in *note Bash Builtins::) is
     enabled, the match is performed without regard to the case of
     alphabetic characters.  Substrings matched by parenthesized
     subexpressions within the regular expression are saved in the
     array variable `BASH_REMATCH'.  The element of `BASH_REMATCH' with
     index 0 is the portion of the string matching the entire regular
     expression.  The element of `BASH_REMATCH' with index N is the
     portion of the string matching the Nth parenthesized subexpression.

     Expressions may be combined using the following operators, listed
     in decreasing order of precedence:

    `( EXPRESSION )'
          Returns the value of EXPRESSION.  This may be used to
          override the normal precedence of operators.

    `! EXPRESSION'
          True if EXPRESSION is false.

    `EXPRESSION1 && EXPRESSION2'
          True if both EXPRESSION1 and EXPRESSION2 are true.

    `EXPRESSION1 || EXPRESSION2'
          True if either EXPRESSION1 or EXPRESSION2 is true.
     The `&&' and `||' operators do not evaluate EXPRESSION2 if the
     value of EXPRESSION1 is sufficient to determine the return value
     of the entire conditional expression.



File: bash.info,  Node: Command Grouping,  Prev: Conditional Constructs,  Up: Compound Commands

3.2.4.3 Grouping Commands
.........................

Bash provides two ways to group a list of commands to be executed as a
unit.  When commands are grouped, redirections may be applied to the
entire command list.  For example, the output of all the commands in
the list may be redirected to a single stream.

`()'
          ( LIST )

     Placing a list of commands between parentheses causes a subshell
     environment to be created (*note Command Execution Environment::),
     and each of the commands in LIST to be executed in that subshell.
     Since the LIST is executed in a subshell, variable assignments do
     not remain in effect after the subshell completes.

`{}'
          { LIST; }

     Placing a list of commands between curly braces causes the list to
     be executed in the current shell context.  No subshell is created.
     The semicolon (or newline) following LIST is required.

   In addition to the creation of a subshell, there is a subtle
difference between these two constructs due to historical reasons.  The
braces are `reserved words', so they must be separated from the LIST by
`blank's.  The parentheses are `operators', and are recognized as
separate tokens by the shell even if they are not separated from the
LIST by whitespace.

   The exit status of both of these constructs is the exit status of
LIST.


File: bash.info,  Node: Shell Functions,  Next: Shell Parameters,  Prev: Shell Commands,  Up: Basic Shell Features

3.3 Shell Functions
===================

Shell functions are a way to group commands for later execution using a
single name for the group.  They are executed just like a "regular"
command.  When the name of a shell function is used as a simple command
name, the list of commands associated with that function name is
executed.  Shell functions are executed in the current shell context;
no new process is created to interpret them.

   Functions are declared using this syntax: 
     [ `function' ] NAME () COMPOUND-COMMAND [ REDIRECTIONS ]

   This defines a shell function named NAME.  The reserved word
`function' is optional.  If the `function' reserved word is supplied,
the parentheses are optional.  The BODY of the function is the compound
command COMPOUND-COMMAND (*note Compound Commands::).  That command is
usually a LIST enclosed between { and }, but may be any compound
command listed above.  COMPOUND-COMMAND is executed whenever NAME is
specified as the name of a command.  Any redirections (*note
Redirections::) associated with the shell function are performed when
the function is executed.

   A function definition may be deleted using the `-f' option to the
`unset' builtin (*note Bourne Shell Builtins::).

   The exit status of a function definition is zero unless a syntax
error occurs or a readonly function with the same name already exists.
When executed, the exit status of a function is the exit status of the
last command executed in the body.

   Note that for historical reasons, in the most common usage the curly
braces that surround the body of the function must be separated from
the body by `blank's or newlines.  This is because the braces are
reserved words and are only recognized as such when they are separated
by whitespace.  Also, when using the braces, the LIST must be
terminated by a semicolon, a `&', or a newline.

   When a function is executed, the arguments to the function become
the positional parameters during its execution (*note Positional
Parameters::).  The special parameter `#' that expands to the number of
positional parameters is updated to reflect the change.  Special
parameter `0' is unchanged.  The first element of the `FUNCNAME'
variable is set to the name of the function while the function is
executing.  All other aspects of the shell execution environment are
identical between a function and its caller with the exception that the
`DEBUG' and `RETURN' traps are not inherited unless the function has
been given the `trace' attribute using the `declare' builtin or the `-o
functrace' option has been enabled with the `set' builtin, (in which
case all functions inherit the `DEBUG' and `RETURN' traps).  *Note
Bourne Shell Builtins::, for the description of the `trap' builtin.

   If the builtin command `return' is executed in a function, the
function completes and execution resumes with the next command after
the function call.  Any command associated with the `RETURN' trap is
executed before execution resumes.  When a function completes, the
values of the positional parameters and the special parameter `#' are
restored to the values they had prior to the function's execution.  If
a numeric argument is given to `return', that is the function's return
status; otherwise the function's return status is the exit status of
the last command executed before the `return'.

   Variables local to the function may be declared with the `local'
builtin.  These variables are visible only to the function and the
commands it invokes.

   Function names and definitions may be listed with the `-f' option to
the `declare' or `typeset' builtin commands (*note Bash Builtins::).
The `-F' option to `declare' or `typeset' will list the function names
only (and optionally the source file and line number, if the `extdebug'
shell option is enabled).  Functions may be exported so that subshells
automatically have them defined with the `-f' option to the `export'
builtin (*note Bourne Shell Builtins::).  Note that shell functions and
variables with the same name may result in multiple identically-named
entries in the environment passed to the shell's children.  Care should
be taken in cases where this may cause a problem.

   Functions may be recursive.  No limit is placed on the number of
recursive  calls.


File: bash.info,  Node: Shell Parameters,  Next: Shell Expansions,  Prev: Shell Functions,  Up: Basic Shell Features

3.4 Shell Parameters
====================

* Menu:

* Positional Parameters::	The shell's command-line arguments.
* Special Parameters::		Parameters denoted by special characters.

   A PARAMETER is an entity that stores values.  It can be a `name', a
number, or one of the special characters listed below.  A VARIABLE is a
parameter denoted by a `name'.  A variable has a VALUE and zero or more
ATTRIBUTES.  Attributes are assigned using the `declare' builtin command
(see the description of the `declare' builtin in *note Bash Builtins::).

   A parameter is set if it has been assigned a value.  The null string
is a valid value.  Once a variable is set, it may be unset only by using
the `unset' builtin command.

   A variable may be assigned to by a statement of the form
     NAME=[VALUE]
   If VALUE is not given, the variable is assigned the null string.  All
VALUEs undergo tilde expansion, parameter and variable expansion,
command substitution, arithmetic expansion, and quote removal (detailed
below).  If the variable has its `integer' attribute set, then VALUE is
evaluated as an arithmetic expression even if the `$((...))' expansion
is not used (*note Arithmetic Expansion::).  Word splitting is not
performed, with the exception of `"$@"' as explained below.  Filename
expansion is not performed.  Assignment statements may also appear as
arguments to the `alias', `declare', `typeset', `export', `readonly',
and `local' builtin commands.

   In the context where an assignment statement is assigning a value to
a shell variable or array index (*note Arrays::), the `+=' operator can
be used to append to or add to the variable's previous value.  When
`+=' is applied to a variable for which the integer attribute has been
set, VALUE is evaluated as an arithmetic expression and added to the
variable's current value, which is also evaluated.  When `+=' is
applied to an array variable using compound assignment (*note
Arrays::), the variable's value is not unset (as it is when using `='),
and new values are appended to the array beginning at one greater than
the array's maximum index.  When applied to a string-valued variable,
VALUE is expanded and appended to the variable's value.


File: bash.info,  Node: Positional Parameters,  Next: Special Parameters,  Up: Shell Parameters

3.4.1 Positional Parameters
---------------------------

A POSITIONAL PARAMETER is a parameter denoted by one or more digits,
other than the single digit `0'.  Positional parameters are assigned
from the shell's arguments when it is invoked, and may be reassigned
using the `set' builtin command.  Positional parameter `N' may be
referenced as `${N}', or as `$N' when `N' consists of a single digit.
Positional parameters may not be assigned to with assignment statements.
The `set' and `shift' builtins are used to set and unset them (*note
Shell Builtin Commands::).  The positional parameters are temporarily
replaced when a shell function is executed (*note Shell Functions::).

   When a positional parameter consisting of more than a single digit
is expanded, it must be enclosed in braces.


File: bash.info,  Node: Special Parameters,  Prev: Positional Parameters,  Up: Shell Parameters

3.4.2 Special Parameters
------------------------

The shell treats several parameters specially.  These parameters may
only be referenced; assignment to them is not allowed.

`*'
     Expands to the positional parameters, starting from one.  When the
     expansion occurs within double quotes, it expands to a single word
     with the value of each parameter separated by the first character
     of the `IFS' special variable.  That is, `"$*"' is equivalent to
     `"$1C$2C..."', where C is the first character of the value of the
     `IFS' variable.  If `IFS' is unset, the parameters are separated
     by spaces.  If `IFS' is null, the parameters are joined without
     intervening separators.

`@'
     Expands to the positional parameters, starting from one.  When the
     expansion occurs within double quotes, each parameter expands to a
     separate word.  That is, `"$@"' is equivalent to `"$1" "$2" ...'.
     If the double-quoted expansion occurs within a word, the expansion
     of the first parameter is joined with the beginning part of the
     original word, and the expansion of the last parameter is joined
     with the last part of the original word.  When there are no
     positional parameters, `"$@"' and `$@' expand to nothing (i.e.,
     they are removed).

`#'
     Expands to the number of positional parameters in decimal.

`?'
     Expands to the exit status of the most recently executed foreground
     pipeline.

`-'
     (A hyphen.)  Expands to the current option flags as specified upon
     invocation, by the `set' builtin command, or those set by the
     shell itself (such as the `-i' option).

`$'
     Expands to the process ID of the shell.  In a `()' subshell, it
     expands to the process ID of the invoking shell, not the subshell.

`!'
     Expands to the process ID of the most recently executed background
     (asynchronous) command.

`0'
     Expands to the name of the shell or shell script.  This is set at
     shell initialization.  If Bash is invoked with a file of commands
     (*note Shell Scripts::), `$0' is set to the name of that file.  If
     Bash is started with the `-c' option (*note Invoking Bash::), then
     `$0' is set to the first argument after the string to be executed,
     if one is present.  Otherwise, it is set to the filename used to
     invoke Bash, as given by argument zero.

`_'
     (An underscore.)  At shell startup, set to the absolute pathname
     used to invoke the shell or shell script being executed as passed
     in the environment or argument list.  Subsequently, expands to the
     last argument to the previous command, after expansion.  Also set
     to the full pathname used to invoke each command executed and
     placed in the environment exported to that command.  When checking
     mail, this parameter holds the name of the mail file.


File: bash.info,  Node: Shell Expansions,  Next: Redirections,  Prev: Shell Parameters,  Up: Basic Shell Features

3.5 Shell Expansions
====================

Expansion is performed on the command line after it has been split into
`token's.  There are seven kinds of expansion performed:
   * brace expansion

   * tilde expansion

   * parameter and variable expansion

   * command substitution

   * arithmetic expansion

   * word splitting

   * filename expansion

* Menu:

* Brace Expansion::		Expansion of expressions within braces.
* Tilde Expansion::		Expansion of the ~ character.
* Shell Parameter Expansion::	How Bash expands variables to their values.
* Command Substitution::	Using the output of a command as an argument.
* Arithmetic Expansion::	How to use arithmetic in shell expansions.
* Process Substitution::	A way to write and read to and from a
				command.
* Word Splitting::	How the results of expansion are split into separate
			arguments.
* Filename Expansion::	A shorthand for specifying filenames matching patterns.
* Quote Removal::	How and when quote characters are removed from
			words.

   The order of expansions is: brace expansion, tilde expansion,
parameter, variable, and arithmetic expansion and command substitution
(done in a left-to-right fashion), word splitting, and filename
expansion.

   On systems that can support it, there is an additional expansion
available: PROCESS SUBSTITUTION.  This is performed at the same time as
parameter, variable, and arithmetic expansion and command substitution.

   Only brace expansion, word splitting, and filename expansion can
change the number of words of the expansion; other expansions expand a
single word to a single word.  The only exceptions to this are the
expansions of `"$@"' (*note Special Parameters::) and `"${NAME[@]}"'
(*note Arrays::).

   After all expansions, `quote removal' (*note Quote Removal::) is
performed.


File: bash.info,  Node: Brace Expansion,  Next: Tilde Expansion,  Up: Shell Expansions

3.5.1 Brace Expansion
---------------------

Brace expansion is a mechanism by which arbitrary strings may be
generated.  This mechanism is similar to FILENAME EXPANSION (*note
Filename Expansion::), but the file names generated need not exist.
Patterns to be brace expanded take the form of an optional PREAMBLE,
followed by either a series of comma-separated strings or a sequnce
expression between a pair of braces, followed by an optional POSTSCRIPT.
The preamble is prefixed to each string contained within the braces, and
the postscript is then appended to each resulting string, expanding left
to right.

   Brace expansions may be nested.  The results of each expanded string
are not sorted; left to right order is preserved.  For example,
     bash$ echo a{d,c,b}e
     ade ace abe

   A sequence expression takes the form `{X..Y}', where X and Y are
either integers or single characters.  When integers are supplied, the
expression expands to each number between X and Y, inclusive.  When
characters are supplied, the expression expands to each character
lexicographically between X and Y, inclusive.  Note that both X and Y
must be of the same type.

   Brace expansion is performed before any other expansions, and any
characters special to other expansions are preserved in the result.  It
is strictly textual.  Bash does not apply any syntactic interpretation
to the context of the expansion or the text between the braces.  To
avoid conflicts with parameter expansion, the string `${' is not
considered eligible for brace expansion.

   A correctly-formed brace expansion must contain unquoted opening and
closing braces, and at least one unquoted comma or a valid sequence
expression.  Any incorrectly formed brace expansion is left unchanged.

   A { or `,' may be quoted with a backslash to prevent its being
considered part of a brace expression.  To avoid conflicts with
parameter expansion, the string `${' is not considered eligible for
brace expansion.

   This construct is typically used as shorthand when the common prefix
of the strings to be generated is longer than in the above example:
     mkdir /usr/local/src/bash/{old,new,dist,bugs}
   or
     chown root /usr/{ucb/{ex,edit},lib/{ex?.?*,how_ex}}


File: bash.info,  Node: Tilde Expansion,  Next: Shell Parameter Expansion,  Prev: Brace Expansion,  Up: Shell Expansions

3.5.2 Tilde Expansion
---------------------

If a word begins with an unquoted tilde character (`~'), all of the
characters up to the first unquoted slash (or all characters, if there
is no unquoted slash) are considered a TILDE-PREFIX.  If none of the
characters in the tilde-prefix are quoted, the characters in the
tilde-prefix following the tilde are treated as a possible LOGIN NAME.
If this login name is the null string, the tilde is replaced with the
value of the `HOME' shell variable.  If `HOME' is unset, the home
directory of the user executing the shell is substituted instead.
Otherwise, the tilde-prefix is replaced with the home directory
associated with the specified login name.

   If the tilde-prefix is `~+', the value of the shell variable `PWD'
replaces the tilde-prefix.  If the tilde-prefix is `~-', the value of
the shell variable `OLDPWD', if it is set, is substituted.

   If the characters following the tilde in the tilde-prefix consist of
a number N, optionally prefixed by a `+' or a `-', the tilde-prefix is
replaced with the corresponding element from the directory stack, as it
would be displayed by the `dirs' builtin invoked with the characters
following tilde in the tilde-prefix as an argument (*note The Directory
Stack::).  If the tilde-prefix, sans the tilde, consists of a number
without a leading `+' or `-', `+' is assumed.

   If the login name is invalid, or the tilde expansion fails, the word
is left unchanged.

   Each variable assignment is checked for unquoted tilde-prefixes
immediately following a `:' or the first `='.  In these cases, tilde
expansion is also performed.  Consequently, one may use file names with
tildes in assignments to `PATH', `MAILPATH', and `CDPATH', and the
shell assigns the expanded value.

   The following table shows how Bash treats unquoted tilde-prefixes:

`~'
     The value of `$HOME'

`~/foo'
     `$HOME/foo'

`~fred/foo'
     The subdirectory `foo' of the home directory of the user `fred'

`~+/foo'
     `$PWD/foo'

`~-/foo'
     `${OLDPWD-'~-'}/foo'

`~N'
     The string that would be displayed by `dirs +N'

`~+N'
     The string that would be displayed by `dirs +N'

`~-N'
     The string that would be displayed by `dirs -N'



File: bash.info,  Node: Shell Parameter Expansion,  Next: Command Substitution,  Prev: Tilde Expansion,  Up: Shell Expansions

3.5.3 Shell Parameter Expansion
-------------------------------

The `$' character introduces parameter expansion, command substitution,
or arithmetic expansion.  The parameter name or symbol to be expanded
may be enclosed in braces, which are optional but serve to protect the
variable to be expanded from characters immediately following it which
could be interpreted as part of the name.

   When braces are used, the matching ending brace is the first `}' not
escaped by a backslash or within a quoted string, and not within an
embedded arithmetic expansion, command substitution, or parameter
expansion.

   The basic form of parameter expansion is ${PARAMETER}.  The value of
PARAMETER is substituted.  The braces are required when PARAMETER is a
positional parameter with more than one digit, or when PARAMETER is
followed by a character that is not to be interpreted as part of its
name.

   If the first character of PARAMETER is an exclamation point, a level
of variable indirection is introduced.  Bash uses the value of the
variable formed from the rest of PARAMETER as the name of the variable;
this variable is then expanded and that value is used in the rest of
the substitution, rather than the value of PARAMETER itself.  This is
known as `indirect expansion'.  The exceptions to this are the
expansions of ${!PREFIX*} and ${!NAME[@]} described below.  The
exclamation point must immediately follow the left brace in order to
introduce indirection.

   In each of the cases below, WORD is subject to tilde expansion,
parameter expansion, command substitution, and arithmetic expansion.

   When not performing substring expansion, Bash tests for a parameter
that is unset or null; omitting the colon results in a test only for a
parameter that is unset.  Put another way, if the colon is included,
the operator tests for both existence and that the value is not null;
if the colon is omitted, the operator tests only for existence.

`${PARAMETER:-WORD}'
     If PARAMETER is unset or null, the expansion of WORD is
     substituted.  Otherwise, the value of PARAMETER is substituted.

`${PARAMETER:=WORD}'
     If PARAMETER is unset or null, the expansion of WORD is assigned
     to PARAMETER.  The value of PARAMETER is then substituted.
     Positional parameters and special parameters may not be assigned to
     in this way.

`${PARAMETER:?WORD}'
     If PARAMETER is null or unset, the expansion of WORD (or a message
     to that effect if WORD is not present) is written to the standard
     error and the shell, if it is not interactive, exits.  Otherwise,
     the value of PARAMETER is substituted.

`${PARAMETER:+WORD}'
     If PARAMETER is null or unset, nothing is substituted, otherwise
     the expansion of WORD is substituted.

`${PARAMETER:OFFSET}'
`${PARAMETER:OFFSET:LENGTH}'
     Expands to up to LENGTH characters of PARAMETER starting at the
     character specified by OFFSET.  If LENGTH is omitted, expands to
     the substring of PARAMETER starting at the character specified by
     OFFSET.  LENGTH and OFFSET are arithmetic expressions (*note Shell
     Arithmetic::).  This is referred to as Substring Expansion.

     LENGTH must evaluate to a number greater than or equal to zero.
     If OFFSET evaluates to a number less than zero, the value is used
     as an offset from the end of the value of PARAMETER.  If PARAMETER
     is `@', the result is LENGTH positional parameters beginning at
     OFFSET.  If PARAMETER is an array name indexed by `@' or `*', the
     result is the LENGTH members of the array beginning with
     `${PARAMETER[OFFSET]}'.  A negative OFFSET is taken relative to
     one greater than the maximum index of the specified array.  Note
     that a negative offset must be separated from the colon by at least
     one space to avoid being confused with the `:-' expansion.
     Substring indexing is zero-based unless the positional parameters
     are used, in which case the indexing starts at 1.

`${!PREFIX*}'
`${!PREFIX@}'
     Expands to the names of variables whose names begin with PREFIX,
     separated by the first character of the `IFS' special variable.

`${!NAME[@]}'
`${!NAME[*]}'
     If NAME is an array variable, expands to the list of array indices
     (keys) assigned in NAME.  If NAME is not an array, expands to 0 if
     NAME is set and null otherwise.  When `@' is used and the
     expansion appears within double quotes, each key expands to a
     separate word.

`${#PARAMETER}'
     The length in characters of the expanded value of PARAMETER is
     substituted.  If PARAMETER is `*' or `@', the value substituted is
     the number of positional parameters.  If PARAMETER is an array
     name subscripted by `*' or `@', the value substituted is the
     number of elements in the array.

`${PARAMETER#WORD}'
`${PARAMETER##WORD}'
     The WORD is expanded to produce a pattern just as in filename
     expansion (*note Filename Expansion::).  If the pattern matches
     the beginning of the expanded value of PARAMETER, then the result
     of the expansion is the expanded value of PARAMETER with the
     shortest matching pattern (the `#' case) or the longest matching
     pattern (the `##' case) deleted.  If PARAMETER is `@' or `*', the
     pattern removal operation is applied to each positional parameter
     in turn, and the expansion is the resultant list.  If PARAMETER is
     an array variable subscripted with `@' or `*', the pattern removal
     operation is applied to each member of the array in turn, and the
     expansion is the resultant list.

`${PARAMETER%WORD}'
`${PARAMETER%%WORD}'
     The WORD is expanded to produce a pattern just as in filename
     expansion.  If the pattern matches a trailing portion of the
     expanded value of PARAMETER, then the result of the expansion is
     the value of PARAMETER with the shortest matching pattern (the `%'
     case) or the longest matching pattern (the `%%' case) deleted.  If
     PARAMETER is `@' or `*', the pattern removal operation is applied
     to each positional parameter in turn, and the expansion is the
     resultant list.  If PARAMETER is an array variable subscripted
     with `@' or `*', the pattern removal operation is applied to each
     member of the array in turn, and the expansion is the resultant
     list.

`${PARAMETER/PATTERN/STRING}'
     The PATTERN is expanded to produce a pattern just as in filename
     expansion.  PARAMETER is expanded and the longest match of PATTERN
     against its value is replaced with STRING.  If PATTERN begins with
     `/', all matches of PATTERN are replaced with STRING.  Normally
     only the first match is replaced.  If PATTERN begins with `#', it
     must match at the beginning of the expanded value of PARAMETER.
     If PATTERN begins with `%', it must match at the end of the
     expanded value of PARAMETER.  If STRING is null, matches of
     PATTERN are deleted and the `/' following PATTERN may be omitted.
     If PARAMETER is `@' or `*', the substitution operation is applied
     to each positional parameter in turn, and the expansion is the
     resultant list.  If PARAMETER is an array variable subscripted
     with `@' or `*', the substitution operation is applied to each
     member of the array in turn, and the expansion is the resultant
     list.



File: bash.info,  Node: Command Substitution,  Next: Arithmetic Expansion,  Prev: Shell Parameter Expansion,  Up: Shell Expansions

3.5.4 Command Substitution
--------------------------

Command substitution allows the output of a command to replace the
command itself.  Command substitution occurs when a command is enclosed
as follows:
     $(COMMAND)
   or
     `COMMAND`

Bash performs the expansion by executing COMMAND and replacing the
command substitution with the standard output of the command, with any
trailing newlines deleted.  Embedded newlines are not deleted, but they
may be removed during word splitting.  The command substitution `$(cat
FILE)' can be replaced by the equivalent but faster `$(< FILE)'.

   When the old-style backquote form of substitution is used, backslash
retains its literal meaning except when followed by `$', ``', or `\'.
The first backquote not preceded by a backslash terminates the command
substitution.  When using the `$(COMMAND)' form, all characters between
the parentheses make up the command; none are treated specially.

   Command substitutions may be nested.  To nest when using the
backquoted form, escape the inner backquotes with backslashes.

   If the substitution appears within double quotes, word splitting and
filename expansion are not performed on the results.


File: bash.info,  Node: Arithmetic Expansion,  Next: Process Substitution,  Prev: Command Substitution,  Up: Shell Expansions

3.5.5 Arithmetic Expansion
--------------------------

Arithmetic expansion allows the evaluation of an arithmetic expression
and the substitution of the result.  The format for arithmetic
expansion is:

     $(( EXPRESSION ))

   The expression is treated as if it were within double quotes, but a
double quote inside the parentheses is not treated specially.  All
tokens in the expression undergo parameter expansion, command
substitution, and quote removal.  Arithmetic expansions may be nested.

   The evaluation is performed according to the rules listed below
(*note Shell Arithmetic::).  If the expression is invalid, Bash prints
a message indicating failure to the standard error and no substitution
occurs.


File: bash.info,  Node: Process Substitution,  Next: Word Splitting,  Prev: Arithmetic Expansion,  Up: Shell Expansions

3.5.6 Process Substitution
--------------------------

Process substitution is supported on systems that support named pipes
(FIFOs) or the `/dev/fd' method of naming open files.  It takes the
form of
     <(LIST)
   or
     >(LIST)
   The process LIST is run with its input or output connected to a FIFO
or some file in `/dev/fd'.  The name of this file is passed as an
argument to the current command as the result of the expansion.  If the
`>(LIST)' form is used, writing to the file will provide input for
LIST.  If the `<(LIST)' form is used, the file passed as an argument
should be read to obtain the output of LIST.  Note that no space may
appear between the `<' or `>' and the left parenthesis, otherwise the
construct would be interpreted as a redirection.

   When available, process substitution is performed simultaneously with
parameter and variable expansion, command substitution, and arithmetic
expansion.


File: bash.info,  Node: Word Splitting,  Next: Filename Expansion,  Prev: Process Substitution,  Up: Shell Expansions

3.5.7 Word Splitting
--------------------

The shell scans the results of parameter expansion, command
substitution, and arithmetic expansion that did not occur within double
quotes for word splitting.

   The shell treats each character of `$IFS' as a delimiter, and splits
the results of the other expansions into words on these characters.  If
`IFS' is unset, or its value is exactly `<space><tab><newline>', the
default, then any sequence of `IFS' characters serves to delimit words.
If `IFS' has a value other than the default, then sequences of the
whitespace characters `space' and `tab' are ignored at the beginning
and end of the word, as long as the whitespace character is in the
value of `IFS' (an `IFS' whitespace character).  Any character in `IFS'
that is not `IFS' whitespace, along with any adjacent `IFS' whitespace
characters, delimits a field.  A sequence of `IFS' whitespace
characters is also treated as a delimiter.  If the value of `IFS' is
null, no word splitting occurs.

   Explicit null arguments (`""' or `''') are retained.  Unquoted
implicit null arguments, resulting from the expansion of parameters
that have no values, are removed.  If a parameter with no value is
expanded within double quotes, a null argument results and is retained.

   Note that if no expansion occurs, no splitting is performed.


File: bash.info,  Node: Filename Expansion,  Next: Quote Removal,  Prev: Word Splitting,  Up: Shell Expansions

3.5.8 Filename Expansion
------------------------

* Menu:

* Pattern Matching::	How the shell matches patterns.

   After word splitting, unless the `-f' option has been set (*note The
Set Builtin::), Bash scans each word for the characters `*', `?', and
`['.  If one of these characters appears, then the word is regarded as
a PATTERN, and replaced with an alphabetically sorted list of file
names matching the pattern. If no matching file names are found, and
the shell option `nullglob' is disabled, the word is left unchanged.
If the `nullglob' option is set, and no matches are found, the word is
removed.  If the `failglob' shell option is set, and no matches are
found, an error message is printed and the command is not executed.  If
the shell option `nocaseglob' is enabled, the match is performed
without regard to the case of alphabetic characters.

   When a pattern is used for filename generation, the character `.' at
the start of a filename or immediately following a slash must be
matched explicitly, unless the shell option `dotglob' is set.  When
matching a file name, the slash character must always be matched
explicitly.  In other cases, the `.' character is not treated specially.

   See the description of `shopt' in *note Bash Builtins::, for a
description of the `nocaseglob', `nullglob', `failglob', and `dotglob'
options.

   The `GLOBIGNORE' shell variable may be used to restrict the set of
filenames matching a pattern.  If `GLOBIGNORE' is set, each matching
filename that also matches one of the patterns in `GLOBIGNORE' is
removed from the list of matches.  The filenames `.' and `..' are
always ignored when `GLOBIGNORE' is set and not null.  However, setting
`GLOBIGNORE' to a non-null value has the effect of enabling the
`dotglob' shell option, so all other filenames beginning with a `.'
will match.  To get the old behavior of ignoring filenames beginning
with a `.', make `.*' one of the patterns in `GLOBIGNORE'.  The
`dotglob' option is disabled when `GLOBIGNORE' is unset.


File: bash.info,  Node: Pattern Matching,  Up: Filename Expansion

3.5.8.1 Pattern Matching
........................

Any character that appears in a pattern, other than the special pattern
characters described below, matches itself.  The NUL character may not
occur in a pattern.  A backslash escapes the following character; the
escaping backslash is discarded when matching.  The special pattern
characters must be quoted if they are to be matched literally.

   The special pattern characters have the following meanings:
`*'
     Matches any string, including the null string.

`?'
     Matches any single character.

`[...]'
     Matches any one of the enclosed characters.  A pair of characters
     separated by a hyphen denotes a RANGE EXPRESSION; any character
     that sorts between those two characters, inclusive, using the
     current locale's collating sequence and character set, is matched.
     If the first character following the `[' is a `!'  or a `^' then
     any character not enclosed is matched.  A `-' may be matched by
     including it as the first or last character in the set.  A `]' may
     be matched by including it as the first character in the set.  The
     sorting order of characters in range expressions is determined by
     the current locale and the value of the `LC_COLLATE' shell
     variable, if set.

     For example, in the default C locale, `[a-dx-z]' is equivalent to
     `[abcdxyz]'.  Many locales sort characters in dictionary order,
     and in these locales `[a-dx-z]' is typically not equivalent to
     `[abcdxyz]'; it might be equivalent to `[aBbCcDdxXyYz]', for
     example.  To obtain the traditional interpretation of ranges in
     bracket expressions, you can force the use of the C locale by
     setting the `LC_COLLATE' or `LC_ALL' environment variable to the
     value `C'.

     Within `[' and `]', CHARACTER CLASSES can be specified using the
     syntax `[:'CLASS`:]', where CLASS is one of the following classes
     defined in the POSIX standard:
          alnum   alpha   ascii   blank   cntrl   digit   graph   lower
          print   punct   space   upper   word    xdigit
     A character class matches any character belonging to that class.
     The `word' character class matches letters, digits, and the
     character `_'.

     Within `[' and `]', an EQUIVALENCE CLASS can be specified using
     the syntax `[='C`=]', which matches all characters with the same
     collation weight (as defined by the current locale) as the
     character C.

     Within `[' and `]', the syntax `[.'SYMBOL`.]' matches the
     collating symbol SYMBOL.

   If the `extglob' shell option is enabled using the `shopt' builtin,
several extended pattern matching operators are recognized.  In the
following description, a PATTERN-LIST is a list of one or more patterns
separated by a `|'.  Composite patterns may be formed using one or more
of the following sub-patterns:

`?(PATTERN-LIST)'
     Matches zero or one occurrence of the given patterns.

`*(PATTERN-LIST)'
     Matches zero or more occurrences of the given patterns.

`+(PATTERN-LIST)'
     Matches one or more occurrences of the given patterns.

`@(PATTERN-LIST)'
     Matches one of the given patterns.

`!(PATTERN-LIST)'
     Matches anything except one of the given patterns.


File: bash.info,  Node: Quote Removal,  Prev: Filename Expansion,  Up: Shell Expansions

3.5.9 Quote Removal
-------------------

After the preceding expansions, all unquoted occurrences of the
characters `\', `'', and `"' that did not result from one of the above
expansions are removed.


File: bash.info,  Node: Redirections,  Next: Executing Commands,  Prev: Shell Expansions,  Up: Basic Shell Features

3.6 Redirections
================

Before a command is executed, its input and output may be REDIRECTED
using a special notation interpreted by the shell.  Redirection may
also be used to open and close files for the current shell execution
environment.  The following redirection operators may precede or appear
anywhere within a simple command or may follow a command.  Redirections
are processed in the order they appear, from left to right.

   In the following descriptions, if the file descriptor number is
omitted, and the first character of the redirection operator is `<',
the redirection refers to the standard input (file descriptor 0).  If
the first character of the redirection operator is `>', the redirection
refers to the standard output (file descriptor 1).

   The word following the redirection operator in the following
descriptions, unless otherwise noted, is subjected to brace expansion,
tilde expansion, parameter expansion, command substitution, arithmetic
expansion, quote removal, filename expansion, and word splitting.  If
it expands to more than one word, Bash reports an error.

   Note that the order of redirections is significant.  For example,
the command
     ls > DIRLIST 2>&1
   directs both standard output (file descriptor 1) and standard error
(file descriptor 2) to the file DIRLIST, while the command
     ls 2>&1 > DIRLIST
   directs only the standard output to file DIRLIST, because the
standard error was duplicated as standard output before the standard
output was redirected to DIRLIST.

   Bash handles several filenames specially when they are used in
redirections, as described in the following table:

`/dev/fd/FD'
     If FD is a valid integer, file descriptor FD is duplicated.

`/dev/stdin'
     File descriptor 0 is duplicated.

`/dev/stdout'
     File descriptor 1 is duplicated.

`/dev/stderr'
     File descriptor 2 is duplicated.

`/dev/tcp/HOST/PORT'
     If HOST is a valid hostname or Internet address, and PORT is an
     integer port number or service name, Bash attempts to open a TCP
     connection to the corresponding socket.

`/dev/udp/HOST/PORT'
     If HOST is a valid hostname or Internet address, and PORT is an
     integer port number or service name, Bash attempts to open a UDP
     connection to the corresponding socket.


   A failure to open or create a file causes the redirection to fail.

   Redirections using file descriptors greater than 9 should be used
with care, as they may conflict with file descriptors the shell uses
internally.

3.6.1 Redirecting Input
-----------------------

Redirection of input causes the file whose name results from the
expansion of WORD to be opened for reading on file descriptor `n', or
the standard input (file descriptor 0) if `n' is not specified.

   The general format for redirecting input is:
     [N]<WORD

3.6.2 Redirecting Output
------------------------

Redirection of output causes the file whose name results from the
expansion of WORD to be opened for writing on file descriptor N, or the
standard output (file descriptor 1) if N is not specified.  If the file
does not exist it is created; if it does exist it is truncated to zero
size.

   The general format for redirecting output is:
     [N]>[|]WORD

   If the redirection operator is `>', and the `noclobber' option to
the `set' builtin has been enabled, the redirection will fail if the
file whose name results from the expansion of WORD exists and is a
regular file.  If the redirection operator is `>|', or the redirection
operator is `>' and the `noclobber' option is not enabled, the
redirection is attempted even if the file named by WORD exists.

3.6.3 Appending Redirected Output
---------------------------------

Redirection of output in this fashion causes the file whose name
results from the expansion of WORD to be opened for appending on file
descriptor N, or the standard output (file descriptor 1) if N is not
specified.  If the file does not exist it is created.

   The general format for appending output is:
     [N]>>WORD

3.6.4 Redirecting Standard Output and Standard Error
----------------------------------------------------

Bash allows both the standard output (file descriptor 1) and the
standard error output (file descriptor 2) to be redirected to the file
whose name is the expansion of WORD with this construct.

   There are two formats for redirecting standard output and standard
error:
     &>WORD
   and
     >&WORD
   Of the two forms, the first is preferred.  This is semantically
equivalent to
     >WORD 2>&1

3.6.5 Here Documents
--------------------

This type of redirection instructs the shell to read input from the
current source until a line containing only WORD (with no trailing
blanks) is seen.  All of the lines read up to that point are then used
as the standard input for a command.

   The format of here-documents is:
     <<[-]WORD
             HERE-DOCUMENT
     DELIMITER

   No parameter expansion, command substitution, arithmetic expansion,
or filename expansion is performed on WORD.  If any characters in WORD
are quoted, the DELIMITER is the result of quote removal on WORD, and
the lines in the here-document are not expanded.  If WORD is unquoted,
all lines of the here-document are subjected to parameter expansion,
command substitution, and arithmetic expansion.  In the latter case,
the character sequence `\newline' is ignored, and `\' must be used to
quote the characters `\', `$', and ``'.

   If the redirection operator is `<<-', then all leading tab
characters are stripped from input lines and the line containing
DELIMITER.  This allows here-documents within shell scripts to be
indented in a natural fashion.

3.6.6 Here Strings
------------------

A variant of here documents, the format is:
     <<< WORD

   The WORD is expanded and supplied to the command on its standard
input.

3.6.7 Duplicating File Descriptors
----------------------------------

The redirection operator
     [N]<&WORD
   is used to duplicate input file descriptors.  If WORD expands to one
or more digits, the file descriptor denoted by N is made to be a copy
of that file descriptor.  If the digits in WORD do not specify a file
descriptor open for input, a redirection error occurs.  If WORD
evaluates to `-', file descriptor N is closed.  If N is not specified,
the standard input (file descriptor 0) is used.

   The operator
     [N]>&WORD
   is used similarly to duplicate output file descriptors.  If N is not
specified, the standard output (file descriptor 1) is used.  If the
digits in WORD do not specify a file descriptor open for output, a
redirection error occurs.  As a special case, if N is omitted, and WORD
does not expand to one or more digits, the standard output and standard
error are redirected as described previously.

3.6.8 Moving File Descriptors
-----------------------------

The redirection operator
     [N]<&DIGIT-
   moves the file descriptor DIGIT to file descriptor N, or the
standard input (file descriptor 0) if N is not specified.  DIGIT is
closed after being duplicated to N.

   Similarly, the redirection operator
     [N]>&DIGIT-
   moves the file descriptor DIGIT to file descriptor N, or the
standard output (file descriptor 1) if N is not specified.

3.6.9 Opening File Descriptors for Reading and Writing
------------------------------------------------------

The redirection operator
     [N]<>WORD
   causes the file whose name is the expansion of WORD to be opened for
both reading and writing on file descriptor N, or on file descriptor 0
if N is not specified.  If the file does not exist, it is created.


File: bash.info,  Node: Executing Commands,  Next: Shell Scripts,  Prev: Redirections,  Up: Basic Shell Features

3.7 Executing Commands
======================

* Menu:

* Simple Command Expansion::	How Bash expands simple commands before
				executing them.
* Command Search and Execution::	How Bash finds commands and runs them.
* Command Execution Environment::	The environment in which Bash
					executes commands that are not
					shell builtins.
* Environment::		The environment given to a command.
* Exit Status::		The status returned by commands and how Bash
			interprets it.
* Signals::		What happens when Bash or a command it runs
			receives a signal.


File: bash.info,  Node: Simple Command Expansion,  Next: Command Search and Execution,  Up: Executing Commands

3.7.1 Simple Command Expansion
------------------------------

When a simple command is executed, the shell performs the following
expansions, assignments, and redirections, from left to right.

  1. The words that the parser has marked as variable assignments (those
     preceding the command name) and redirections are saved for later
     processing.

  2. The words that are not variable assignments or redirections are
     expanded (*note Shell Expansions::).  If any words remain after
     expansion, the first word is taken to be the name of the command
     and the remaining words are the arguments.

  3. Redirections are performed as described above (*note
     Redirections::).

  4. The text after the `=' in each variable assignment undergoes tilde
     expansion, parameter expansion, command substitution, arithmetic
     expansion, and quote removal before being assigned to the variable.

   If no command name results, the variable assignments affect the
current shell environment.  Otherwise, the variables are added to the
environment of the executed command and do not affect the current shell
environment.  If any of the assignments attempts to assign a value to a
readonly variable, an error occurs, and the command exits with a
non-zero status.

   If no command name results, redirections are performed, but do not
affect the current shell environment.  A redirection error causes the
command to exit with a non-zero status.

   If there is a command name left after expansion, execution proceeds
as described below.  Otherwise, the command exits.  If one of the
expansions contained a command substitution, the exit status of the
command is the exit status of the last command substitution performed.
If there were no command substitutions, the command exits with a status
of zero.


File: bash.info,  Node: Command Search and Execution,  Next: Command Execution Environment,  Prev: Simple Command Expansion,  Up: Executing Commands

3.7.2 Command Search and Execution
----------------------------------

After a command has been split into words, if it results in a simple
command and an optional list of arguments, the following actions are
taken.

  1. If the command name contains no slashes, the shell attempts to
     locate it.  If there exists a shell function by that name, that
     function is invoked as described in *note Shell Functions::.

  2. If the name does not match a function, the shell searches for it
     in the list of shell builtins.  If a match is found, that builtin
     is invoked.

  3. If the name is neither a shell function nor a builtin, and
     contains no slashes, Bash searches each element of `$PATH' for a
     directory containing an executable file by that name.  Bash uses a
     hash table to remember the full pathnames of executable files to
     avoid multiple `PATH' searches (see the description of `hash' in
     *note Bourne Shell Builtins::).  A full search of the directories
     in `$PATH' is performed only if the command is not found in the
     hash table.  If the search is unsuccessful, the shell prints an
     error message and returns an exit status of 127.

  4. If the search is successful, or if the command name contains one
     or more slashes, the shell executes the named program in a
     separate execution environment.  Argument 0 is set to the name
     given, and the remaining arguments to the command are set to the
     arguments supplied, if any.

  5. If this execution fails because the file is not in executable
     format, and the file is not a directory, it is assumed to be a
     SHELL SCRIPT and the shell executes it as described in *note Shell
     Scripts::.

  6. If the command was not begun asynchronously, the shell waits for
     the command to complete and collects its exit status.



File: bash.info,  Node: Command Execution Environment,  Next: Environment,  Prev: Command Search and Execution,  Up: Executing Commands

3.7.3 Command Execution Environment
-----------------------------------

The shell has an EXECUTION ENVIRONMENT, which consists of the following:

   * open files inherited by the shell at invocation, as modified by
     redirections supplied to the `exec' builtin

   * the current working directory as set by `cd', `pushd', or `popd',
     or inherited by the shell at invocation

   * the file creation mode mask as set by `umask' or inherited from
     the shell's parent

   * current traps set by `trap'

   * shell parameters that are set by variable assignment or with `set'
     or inherited from the shell's parent in the environment

   * shell functions defined during execution or inherited from the
     shell's parent in the environment

   * options enabled at invocation (either by default or with
     command-line arguments) or by `set'

   * options enabled by `shopt'

   * shell aliases defined with `alias' (*note Aliases::)

   * various process IDs, including those of background jobs (*note
     Lists::), the value of `$$', and the value of `$PPID'


   When a simple command other than a builtin or shell function is to
be executed, it is invoked in a separate execution environment that
consists of the following.  Unless otherwise noted, the values are
inherited from the shell.

   * the shell's open files, plus any modifications and additions
     specified by redirections to the command

   * the current working directory

   * the file creation mode mask

   * shell variables and functions marked for export, along with
     variables exported for the command, passed in the environment
     (*note Environment::)

   * traps caught by the shell are reset to the values inherited from
     the shell's parent, and traps ignored by the shell are ignored


   A command invoked in this separate environment cannot affect the
shell's execution environment.

   Command substitution, commands grouped with parentheses, and
asynchronous commands are invoked in a subshell environment that is a
duplicate of the shell environment, except that traps caught by the
shell are reset to the values that the shell inherited from its parent
at invocation.  Builtin commands that are invoked as part of a pipeline
are also executed in a subshell environment.  Changes made to the
subshell environment cannot affect the shell's execution environment.

   If a command is followed by a `&' and job control is not active, the
default standard input for the command is the empty file `/dev/null'.
Otherwise, the invoked command inherits the file descriptors of the
calling shell as modified by redirections.


File: bash.info,  Node: Environment,  Next: Exit Status,  Prev: Command Execution Environment,  Up: Executing Commands

3.7.4 Environment
-----------------

When a program is invoked it is given an array of strings called the
ENVIRONMENT.  This is a list of name-value pairs, of the form
`name=value'.

   Bash provides several ways to manipulate the environment.  On
invocation, the shell scans its own environment and creates a parameter
for each name found, automatically marking it for EXPORT to child
processes.  Executed commands inherit the environment.  The `export'
and `declare -x' commands allow parameters and functions to be added to
and deleted from the environment.  If the value of a parameter in the
environment is modified, the new value becomes part of the environment,
replacing the old.  The environment inherited by any executed command
consists of the shell's initial environment, whose values may be
modified in the shell, less any pairs removed by the `unset' and
`export -n' commands, plus any additions via the `export' and `declare
-x' commands.

   The environment for any simple command or function may be augmented
temporarily by prefixing it with parameter assignments, as described in
*note Shell Parameters::.  These assignment statements affect only the
environment seen by that command.

   If the `-k' option is set (*note The Set Builtin::), then all
parameter assignments are placed in the environment for a command, not
just those that precede the command name.

   When Bash invokes an external command, the variable `$_' is set to
the full path name of the command and passed to that command in its
environment.


File: bash.info,  Node: Exit Status,  Next: Signals,  Prev: Environment,  Up: Executing Commands

3.7.5 Exit Status
-----------------

For the shell's purposes, a command which exits with a zero exit status
has succeeded.  A non-zero exit status indicates failure.  This
seemingly counter-intuitive scheme is used so there is one well-defined
way to indicate success and a variety of ways to indicate various
failure modes.  When a command terminates on a fatal signal whose
number is N, Bash uses the value 128+N as the exit status.

   If a command is not found, the child process created to execute it
returns a status of 127.  If a command is found but is not executable,
the return status is 126.

   If a command fails because of an error during expansion or
redirection, the exit status is greater than zero.

   The exit status is used by the Bash conditional commands (*note
Conditional Constructs::) and some of the list constructs (*note
Lists::).

   All of the Bash builtins return an exit status of zero if they
succeed and a non-zero status on failure, so they may be used by the
conditional and list constructs.  All builtins return an exit status of
2 to indicate incorrect usage.


File: bash.info,  Node: Signals,  Prev: Exit Status,  Up: Executing Commands

3.7.6 Signals
-------------

When Bash is interactive, in the absence of any traps, it ignores
`SIGTERM' (so that `kill 0' does not kill an interactive shell), and
`SIGINT' is caught and handled (so that the `wait' builtin is
interruptible).  When Bash receives a `SIGINT', it breaks out of any
executing loops.  In all cases, Bash ignores `SIGQUIT'.  If job control
is in effect (*note Job Control::), Bash ignores `SIGTTIN', `SIGTTOU',
and `SIGTSTP'.

   Non-builtin commands started by Bash have signal handlers set to the
values inherited by the shell from its parent.  When job control is not
in effect, asynchronous commands ignore `SIGINT' and `SIGQUIT' in
addition to these inherited handlers.  Commands run as a result of
command substitution ignore the keyboard-generated job control signals
`SIGTTIN', `SIGTTOU', and `SIGTSTP'.

   The shell exits by default upon receipt of a `SIGHUP'.  Before
exiting, an interactive shell resends the `SIGHUP' to all jobs, running
or stopped.  Stopped jobs are sent `SIGCONT' to ensure that they receive
the `SIGHUP'.  To prevent the shell from sending the `SIGHUP' signal to
a particular job, it should be removed from the jobs table with the
`disown' builtin (*note Job Control Builtins::) or marked to not
receive `SIGHUP' using `disown -h'.

   If the  `huponexit' shell option has been set with `shopt' (*note
Bash Builtins::), Bash sends a `SIGHUP' to all jobs when an interactive
login shell exits.

   If Bash is waiting for a command to complete and receives a signal
for which a trap has been set, the trap will not be executed until the
command completes.  When Bash is waiting for an asynchronous command
via the `wait' builtin, the reception of a signal for which a trap has
been set will cause the `wait' builtin to return immediately with an
exit status greater than 128, immediately after which the trap is
executed.


File: bash.info,  Node: Shell Scripts,  Prev: Executing Commands,  Up: Basic Shell Features

3.8 Shell Scripts
=================

A shell script is a text file containing shell commands.  When such a
file is used as the first non-option argument when invoking Bash, and
neither the `-c' nor `-s' option is supplied (*note Invoking Bash::),
Bash reads and executes commands from the file, then exits.  This mode
of operation creates a non-interactive shell.  The shell first searches
for the file in the current directory, and looks in the directories in
`$PATH' if not found there.

   When Bash runs a shell script, it sets the special parameter `0' to
the name of the file, rather than the name of the shell, and the
positional parameters are set to the remaining arguments, if any are
given.  If no additional arguments are supplied, the positional
parameters are unset.

   A shell script may be made executable by using the `chmod' command
to turn on the execute bit.  When Bash finds such a file while
searching the `$PATH' for a command, it spawns a subshell to execute
it.  In other words, executing
     filename ARGUMENTS
   is equivalent to executing
     bash filename ARGUMENTS

if `filename' is an executable shell script.  This subshell
reinitializes itself, so that the effect is as if a new shell had been
invoked to interpret the script, with the exception that the locations
of commands remembered by the parent (see the description of `hash' in
*note Bourne Shell Builtins::) are retained by the child.

   Most versions of Unix make this a part of the operating system's
command execution mechanism.  If the first line of a script begins with
the two characters `#!', the remainder of the line specifies an
interpreter for the program.  Thus, you can specify Bash, `awk', Perl,
or some other interpreter and write the rest of the script file in that
language.

   The arguments to the interpreter consist of a single optional
argument following the interpreter name on the first line of the script
file, followed by the name of the script file, followed by the rest of
the arguments.  Bash will perform this action on operating systems that
do not handle it themselves.  Note that some older versions of Unix
limit the interpreter name and argument to a maximum of 32 characters.

   Bash scripts often begin with `#! /bin/bash' (assuming that Bash has
been installed in `/bin'), since this ensures that Bash will be used to
interpret the script, even if it is executed under another shell.


File: bash.info,  Node: Shell Builtin Commands,  Next: Shell Variables,  Prev: Basic Shell Features,  Up: Top

4 Shell Builtin Commands
************************

* Menu:

* Bourne Shell Builtins::	Builtin commands inherited from the Bourne
				Shell.
* Bash Builtins::		Table of builtins specific to Bash.
* The Set Builtin::		This builtin is so overloaded it
				deserves its own section.
* Special Builtins::		Builtin commands classified specially by
				POSIX.

   Builtin commands are contained within the shell itself.  When the
name of a builtin command is used as the first word of a simple command
(*note Simple Commands::), the shell executes the command directly,
without invoking another program.  Builtin commands are necessary to
implement functionality impossible or inconvenient to obtain with
separate utilities.

   This section briefly describes the builtins which Bash inherits from
the Bourne Shell, as well as the builtin commands which are unique to
or have been extended in Bash.

   Several builtin commands are described in other chapters:  builtin
commands which provide the Bash interface to the job control facilities
(*note Job Control Builtins::), the directory stack (*note Directory
Stack Builtins::), the command history (*note Bash History Builtins::),
and the programmable completion facilities (*note Programmable
Completion Builtins::).

   Many of the builtins have been extended by POSIX or Bash.

   Unless otherwise noted, each builtin command documented as accepting
options preceded by `-' accepts `--' to signify the end of the options.
For example, the `:', `true', `false', and `test' builtins do not
accept options.


File: bash.info,  Node: Bourne Shell Builtins,  Next: Bash Builtins,  Up: Shell Builtin Commands

4.1 Bourne Shell Builtins
=========================

The following shell builtin commands are inherited from the Bourne
Shell.  These commands are implemented as specified by the POSIX
standard.

`:    (a colon)'
          : [ARGUMENTS]
     Do nothing beyond expanding ARGUMENTS and performing redirections.
     The return status is zero.

`.    (a period)'
          . FILENAME [ARGUMENTS]
     Read and execute commands from the FILENAME argument in the
     current shell context.  If FILENAME does not contain a slash, the
     `PATH' variable is used to find FILENAME.  When Bash is not in
     POSIX mode, the current directory is searched if FILENAME is not
     found in `$PATH'.  If any ARGUMENTS are supplied, they become the
     positional parameters when FILENAME is executed.  Otherwise the
     positional parameters are unchanged.  The return status is the
     exit status of the last command executed, or zero if no commands
     are executed.  If FILENAME is not found, or cannot be read, the
     return status is non-zero.  This builtin is equivalent to `source'.

`break'
          break [N]
     Exit from a `for', `while', `until', or `select' loop.  If N is
     supplied, the Nth enclosing loop is exited.  N must be greater
     than or equal to 1.  The return status is zero unless N is not
     greater than or equal to 1.

`cd'
          cd [-L|-P] [DIRECTORY]
     Change the current working directory to DIRECTORY.  If DIRECTORY
     is not given, the value of the `HOME' shell variable is used.  If
     the shell variable `CDPATH' exists, it is used as a search path.
     If DIRECTORY begins with a slash, `CDPATH' is not used.

     The `-P' option means to not follow symbolic links; symbolic links
     are followed by default or with the `-L' option.  If DIRECTORY is
     `-', it is equivalent to `$OLDPWD'.

     If a non-empty directory name from `CDPATH' is used, or if `-' is
     the first argument, and the directory change is successful, the
     absolute pathname of the new working directory is written to the
     standard output.

     The return status is zero if the directory is successfully changed,
     non-zero otherwise.

`continue'
          continue [N]
     Resume the next iteration of an enclosing `for', `while', `until',
     or `select' loop.  If N is supplied, the execution of the Nth
     enclosing loop is resumed.  N must be greater than or equal to 1.
     The return status is zero unless N is not greater than or equal to
     1.

`eval'
          eval [ARGUMENTS]
     The arguments are concatenated together into a single command,
     which is then read and executed, and its exit status returned as
     the exit status of `eval'.  If there are no arguments or only
     empty arguments, the return status is zero.

`exec'
          exec [-cl] [-a NAME] [COMMAND [ARGUMENTS]]
     If COMMAND is supplied, it replaces the shell without creating a
     new process.  If the `-l' option is supplied, the shell places a
     dash at the beginning of the zeroth arg passed to COMMAND.  This
     is what the `login' program does.  The `-c' option causes COMMAND
     to be executed with an empty environment.  If `-a' is supplied,
     the shell passes NAME as the zeroth argument to COMMAND.  If no
     COMMAND is specified, redirections may be used to affect the
     current shell environment.  If there are no redirection errors, the
     return status is zero; otherwise the return status is non-zero.

`exit'
          exit [N]
     Exit the shell, returning a status of N to the shell's parent.  If
     N is omitted, the exit status is that of the last command executed.
     Any trap on `EXIT' is executed before the shell terminates.

`export'
          export [-fn] [-p] [NAME[=VALUE]]
     Mark each NAME to be passed to child processes in the environment.
     If the `-f' option is supplied, the NAMEs refer to shell
     functions; otherwise the names refer to shell variables.  The `-n'
     option means to no longer mark each NAME for export.  If no NAMES
     are supplied, or if the `-p' option is given, a list of exported
     names is displayed.  The `-p' option displays output in a form
     that may be reused as input.  If a variable name is followed by
     =VALUE, the value of the variable is set to VALUE.

     The return status is zero unless an invalid option is supplied,
     one of the names is not a valid shell variable name, or `-f' is
     supplied with a name that is not a shell function.

`getopts'
          getopts OPTSTRING NAME [ARGS]
     `getopts' is used by shell scripts to parse positional parameters.
     OPTSTRING contains the option characters to be recognized; if a
     character is followed by a colon, the option is expected to have an
     argument, which should be separated from it by white space.  The
     colon (`:') and question mark (`?') may not be used as option
     characters.  Each time it is invoked, `getopts' places the next
     option in the shell variable NAME, initializing NAME if it does
     not exist, and the index of the next argument to be processed into
     the variable `OPTIND'.  `OPTIND' is initialized to 1 each time the
     shell or a shell script is invoked.  When an option requires an
     argument, `getopts' places that argument into the variable
     `OPTARG'.  The shell does not reset `OPTIND' automatically; it
     must be manually reset between multiple calls to `getopts' within
     the same shell invocation if a new set of parameters is to be used.

     When the end of options is encountered, `getopts' exits with a
     return value greater than zero.  `OPTIND' is set to the index of
     the first non-option argument, and `name' is set to `?'.

     `getopts' normally parses the positional parameters, but if more
     arguments are given in ARGS, `getopts' parses those instead.

     `getopts' can report errors in two ways.  If the first character of
     OPTSTRING is a colon, SILENT error reporting is used.  In normal
     operation diagnostic messages are printed when invalid options or
     missing option arguments are encountered.  If the variable `OPTERR'
     is set to 0, no error messages will be displayed, even if the first
     character of `optstring' is not a colon.

     If an invalid option is seen, `getopts' places `?' into NAME and,
     if not silent, prints an error message and unsets `OPTARG'.  If
     `getopts' is silent, the option character found is placed in
     `OPTARG' and no diagnostic message is printed.

     If a required argument is not found, and `getopts' is not silent,
     a question mark (`?') is placed in NAME, `OPTARG' is unset, and a
     diagnostic message is printed.  If `getopts' is silent, then a
     colon (`:') is placed in NAME and `OPTARG' is set to the option
     character found.

`hash'
          hash [-r] [-p FILENAME] [-dt] [NAME]
     Remember the full pathnames of commands specified as NAME
     arguments, so they need not be searched for on subsequent
     invocations.  The commands are found by searching through the
     directories listed in `$PATH'.  The `-p' option inhibits the path
     search, and FILENAME is used as the location of NAME.  The `-r'
     option causes the shell to forget all remembered locations.  The
     `-d' option causes the shell to forget the remembered location of
     each NAME.  If the `-t' option is supplied, the full pathname to
     which each NAME corresponds is printed.  If multiple NAME
     arguments are supplied with `-t' the NAME is printed before the
     hashed full pathname.  The `-l' option causes output to be
     displayed in a format that may be reused as input.  If no
     arguments are given, or if only `-l' is supplied, information
     about remembered commands is printed.  The return status is zero
     unless a NAME is not found or an invalid option is supplied.

`pwd'
          pwd [-LP]
     Print the absolute pathname of the current working directory.  If
     the `-P' option is supplied, the pathname printed will not contain
     symbolic links.  If the `-L' option is supplied, the pathname
     printed may contain symbolic links.  The return status is zero
     unless an error is encountered while determining the name of the
     current directory or an invalid option is supplied.

`readonly'
          readonly [-apf] [NAME[=VALUE]] ...
     Mark each NAME as readonly.  The values of these names may not be
     changed by subsequent assignment.  If the `-f' option is supplied,
     each NAME refers to a shell function.  The `-a' option means each
     NAME refers to an array variable.  If no NAME arguments are given,
     or if the `-p' option is supplied, a list of all readonly names is
     printed.  The `-p' option causes output to be displayed in a
     format that may be reused as input.  If a variable name is
     followed by =VALUE, the value of the variable is set to VALUE.
     The return status is zero unless an invalid option is supplied,
     one of the NAME arguments is not a valid shell variable or
     function name, or the `-f' option is supplied with a name that is
     not a shell function.

`return'
          return [N]
     Cause a shell function to exit with the return value N.  If N is
     not supplied, the return value is the exit status of the last
     command executed in the function.  This may also be used to
     terminate execution of a script being executed with the `.' (or
     `source') builtin, returning either N or the exit status of the
     last command executed within the script as the exit status of the
     script.  Any command associated with the `RETURN' trap is executed
     before execution resumes after the function or script.  The return
     status is non-zero if `return' is used outside a function and not
     during the execution of a script by `.' or `source'.

`shift'
          shift [N]
     Shift the positional parameters to the left by N.  The positional
     parameters from N+1 ... `$#' are renamed to `$1' ... `$#'-N+1.
     Parameters represented by the numbers `$#' to N+1 are unset.  N
     must be a non-negative number less than or equal to `$#'.  If N is
     zero or greater than `$#', the positional parameters are not
     changed.  If N is not supplied, it is assumed to be 1.  The return
     status is zero unless N is greater than `$#' or less than zero,
     non-zero otherwise.

`test'
`['
     Evaluate a conditional expression EXPR.  Each operator and operand
     must be a separate argument.  Expressions are composed of the
     primaries described below in *note Bash Conditional Expressions::.
     `test' does not accept any options, nor does it accept and ignore
     an argument of `--' as signifying the end of options.

     When the `[' form is used, the last argument to the command must
     be a `]'.

     Expressions may be combined using the following operators, listed
     in decreasing order of precedence.

    `! EXPR'
          True if EXPR is false.

    `( EXPR )'
          Returns the value of EXPR.  This may be used to override the
          normal precedence of operators.

    `EXPR1 -a EXPR2'
          True if both EXPR1 and EXPR2 are true.

    `EXPR1 -o EXPR2'
          True if either EXPR1 or EXPR2 is true.

     The `test' and `[' builtins evaluate conditional expressions using
     a set of rules based on the number of arguments.

    0 arguments
          The expression is false.

    1 argument
          The expression is true if and only if the argument is not
          null.

    2 arguments
          If the first argument is `!', the expression is true if and
          only if the second argument is null.  If the first argument
          is one of the unary conditional operators (*note Bash
          Conditional Expressions::), the expression is true if the
          unary test is true.  If the first argument is not a valid
          unary operator, the expression is false.

    3 arguments
          If the second argument is one of the binary conditional
          operators (*note Bash Conditional Expressions::), the result
          of the expression is the result of the binary test using the
          first and third arguments as operands.  If the first argument
          is `!', the value is the negation of the two-argument test
          using the second and third arguments.  If the first argument
          is exactly `(' and the third argument is exactly `)', the
          result is the one-argument test of the second argument.
          Otherwise, the expression is false.  The `-a' and `-o'
          operators are considered binary operators in this case.

    4 arguments
          If the first argument is `!', the result is the negation of
          the three-argument expression composed of the remaining
          arguments.  Otherwise, the expression is parsed and evaluated
          according to precedence using the rules listed above.

    5 or more arguments
          The expression is parsed and evaluated according to precedence
          using the rules listed above.

`times'
          times
     Print out the user and system times used by the shell and its
     children.  The return status is zero.

`trap'
          trap [-lp] [ARG] [SIGSPEC ...]
     The commands in ARG are to be read and executed when the shell
     receives signal SIGSPEC.  If ARG is absent (and there is a single
     SIGSPEC) or equal to `-', each specified signal's disposition is
     reset to the value it had when the shell was started.  If ARG is
     the null string, then the signal specified by each SIGSPEC is
     ignored by the shell and commands it invokes.  If ARG is not
     present and `-p' has been supplied, the shell displays the trap
     commands associated with each SIGSPEC.  If no arguments are
     supplied, or only `-p' is given, `trap' prints the list of commands
     associated with each signal number in a form that may be reused as
     shell input.  The `-l' option causes the shell to print a list of
     signal names and their corresponding numbers.  Each SIGSPEC is
     either a signal name or a signal number.  Signal names are case
     insensitive and the `SIG' prefix is optional.  If a SIGSPEC is `0'
     or `EXIT', ARG is executed when the shell exits.  If a SIGSPEC is
     `DEBUG', the command ARG is executed before every simple command,
     `for' command, `case' command, `select' command, every arithmetic
     `for' command, and before the first command executes in a shell
     function.  Refer to the description of the `extglob' option to the
     `shopt' builtin (*note Bash Builtins::) for details of its effect
     on the `DEBUG' trap.  If a SIGSPEC is `ERR', the command ARG is
     executed whenever a simple command has a non-zero exit status,
     subject to the following conditions.  The `ERR' trap is not
     executed if the failed command is part of the command list
     immediately following an `until' or `while' keyword, part of the
     test in an `if' statement, part of a `&&' or `||' list, or if the
     command's return status is being inverted using `!'.  These are
     the same conditions obeyed by the `errexit' option.  If a SIGSPEC
     is `RETURN', the command ARG is executed each time a shell
     function or a script executed with the `.' or `source' builtins
     finishes executing.

     Signals ignored upon entry to the shell cannot be trapped or reset.
     Trapped signals that are not being ignored are reset to their
     original values in a child process when it is created.

     The return status is zero unless a SIGSPEC does not specify a
     valid signal.

`umask'
          umask [-p] [-S] [MODE]
     Set the shell process's file creation mask to MODE.  If MODE
     begins with a digit, it is interpreted as an octal number; if not,
     it is interpreted as a symbolic mode mask similar to that accepted
     by the `chmod' command.  If MODE is omitted, the current value of
     the mask is printed.  If the `-S' option is supplied without a
     MODE argument, the mask is printed in a symbolic format.  If the
     `-p' option is supplied, and MODE is omitted, the output is in a
     form that may be reused as input.  The return status is zero if
     the mode is successfully changed or if no MODE argument is
     supplied, and non-zero otherwise.

     Note that when the mode is interpreted as an octal number, each
     number of the umask is subtracted from `7'.  Thus, a umask of `022'
     results in permissions of `755'.

`unset'
          unset [-fv] [NAME]
     Each variable or function NAME is removed.  If no options are
     supplied, or the `-v' option is given, each NAME refers to a shell
     variable.  If the `-f' option is given, the NAMEs refer to shell
     functions, and the function definition is removed.  Readonly
     variables and functions may not be unset.  The return status is
     zero unless a NAME is readonly.


File: bash.info,  Node: Bash Builtins,  Next: The Set Builtin,  Prev: Bourne Shell Builtins,  Up: Shell Builtin Commands

4.2 Bash Builtin Commands
=========================

This section describes builtin commands which are unique to or have
been extended in Bash.  Some of these commands are specified in the
POSIX standard.

`alias'
          alias [`-p'] [NAME[=VALUE] ...]

     Without arguments or with the `-p' option, `alias' prints the list
     of aliases on the standard output in a form that allows them to be
     reused as input.  If arguments are supplied, an alias is defined
     for each NAME whose VALUE is given.  If no VALUE is given, the name
     and value of the alias is printed.  Aliases are described in *note
     Aliases::.

`bind'
          bind [-m KEYMAP] [-lpsvPSV]
          bind [-m KEYMAP] [-q FUNCTION] [-u FUNCTION] [-r KEYSEQ]
          bind [-m KEYMAP] -f FILENAME
          bind [-m KEYMAP] -x KEYSEQ:SHELL-COMMAND
          bind [-m KEYMAP] KEYSEQ:FUNCTION-NAME
          bind READLINE-COMMAND

     Display current Readline (*note Command Line Editing::) key and
     function bindings, bind a key sequence to a Readline function or
     macro, or set a Readline variable.  Each non-option argument is a
     command as it would appear in a a Readline initialization file
     (*note Readline Init File::), but each binding or command must be
     passed as a separate argument;  e.g.,
     `"\C-x\C-r":re-read-init-file'.  Options, if supplied, have the
     following meanings:

    `-m KEYMAP'
          Use KEYMAP as the keymap to be affected by the subsequent
          bindings.  Acceptable KEYMAP names are `emacs',
          `emacs-standard', `emacs-meta', `emacs-ctlx', `vi', `vi-move',
          `vi-command', and `vi-insert'.  `vi' is equivalent to
          `vi-command'; `emacs' is equivalent to `emacs-standard'.

    `-l'
          List the names of all Readline functions.

    `-p'
          Display Readline function names and bindings in such a way
          that they can be used as input or in a Readline
          initialization file.

    `-P'
          List current Readline function names and bindings.

    `-v'
          Display Readline variable names and values in such a way that
          they can be used as input or in a Readline initialization
          file.

    `-V'
          List current Readline variable names and values.

    `-s'
          Display Readline key sequences bound to macros and the
          strings they output in such a way that they can be used as
          input or in a Readline initialization file.

    `-S'
          Display Readline key sequences bound to macros and the
          strings they output.

    `-f FILENAME'
          Read key bindings from FILENAME.

    `-q FUNCTION'
          Query about which keys invoke the named FUNCTION.

    `-u FUNCTION'
          Unbind all keys bound to the named FUNCTION.

    `-r KEYSEQ'
          Remove any current binding for KEYSEQ.

    `-x KEYSEQ:SHELL-COMMAND'
          Cause SHELL-COMMAND to be executed whenever KEYSEQ is entered.


     The return status is zero unless an invalid option is supplied or
     an error occurs.

`builtin'
          builtin [SHELL-BUILTIN [ARGS]]
     Run a shell builtin, passing it ARGS, and return its exit status.
     This is useful when defining a shell function with the same name
     as a shell builtin, retaining the functionality of the builtin
     within the function.  The return status is non-zero if
     SHELL-BUILTIN is not a shell builtin command.

`caller'
          caller [EXPR]
     Returns the context of any active subroutine call (a shell
     function or a script executed with the `.' or `source' builtins).

     Without EXPR, `caller' displays the line number and source
     filename of the current subroutine call.  If a non-negative
     integer is supplied as EXPR, `caller' displays the line number,
     subroutine name, and source file corresponding to that position in
     the current execution call stack.  This extra information may be
     used, for example, to print a stack trace.  The current frame is
     frame 0.

     The return value is 0 unless the shell is not executing a
     subroutine call or EXPR does not correspond to a valid position in
     the call stack.

`command'
          command [-pVv] COMMAND [ARGUMENTS ...]
     Runs COMMAND with ARGUMENTS ignoring any shell function named
     COMMAND.  Only shell builtin commands or commands found by
     searching the `PATH' are executed.  If there is a shell function
     named `ls', running `command ls' within the function will execute
     the external command `ls' instead of calling the function
     recursively.  The `-p' option means to use a default value for
     `PATH' that is guaranteed to find all of the standard utilities.
     The return status in this case is 127 if COMMAND cannot be found
     or an error occurred, and the exit status of COMMAND otherwise.

     If either the `-V' or `-v' option is supplied, a description of
     COMMAND is printed.  The `-v' option causes a single word
     indicating the command or file name used to invoke COMMAND to be
     displayed; the `-V' option produces a more verbose description.
     In this case, the return status is zero if COMMAND is found, and
     non-zero if not.

`declare'
          declare [-afFirtx] [-p] [NAME[=VALUE] ...]

     Declare variables and give them attributes.  If no NAMEs are
     given, then display the values of variables instead.

     The `-p' option will display the attributes and values of each
     NAME.  When `-p' is used, additional options are ignored.  The
     `-F' option inhibits the display of function definitions; only the
     function name and attributes are printed.  If the `extdebug' shell
     option is enabled using `shopt' (*note Bash Builtins::), the
     source file name and line number where the function is defined are
     displayed as well.  `-F' implies `-f'.  The following options can
     be used to restrict output to variables with the specified
     attributes or to give variables attributes:

    `-a'
          Each NAME is an array variable (*note Arrays::).

    `-f'
          Use function names only.

    `-i'
          The variable is to be treated as an integer; arithmetic
          evaluation (*note Shell Arithmetic::) is performed when the
          variable is assigned a value.

    `-r'
          Make NAMEs readonly.  These names cannot then be assigned
          values by subsequent assignment statements or unset.

    `-t'
          Give each NAME the `trace' attribute.  Traced functions
          inherit the `DEBUG' and `RETURN' traps from the calling shell.
          The trace attribute has no special meaning for variables.

    `-x'
          Mark each NAME for export to subsequent commands via the
          environment.

     Using `+' instead of `-' turns off the attribute instead.  When
     used in a function, `declare' makes each NAME local, as with the
     `local' command.  If a variable name is followed by =VALUE, the
     value of the variable is set to VALUE.

     The return status is zero unless an invalid option is encountered,
     an attempt is made to define a function using `-f foo=bar', an
     attempt is made to assign a value to a readonly variable, an
     attempt is made to assign a value to an array variable without
     using the compound assignment syntax (*note Arrays::), one of the
     NAMES is not a valid shell variable name, an attempt is made to
     turn off readonly status for a readonly variable, an attempt is
     made to turn off array status for an array variable, or an attempt
     is made to display a non-existent function with `-f'.

`echo'
          echo [-neE] [ARG ...]
     Output the ARGs, separated by spaces, terminated with a newline.
     The return status is always 0.  If `-n' is specified, the trailing
     newline is suppressed.  If the `-e' option is given,
     interpretation of the following backslash-escaped characters is
     enabled.  The `-E' option disables the interpretation of these
     escape characters, even on systems where they are interpreted by
     default.  The `xpg_echo' shell option may be used to dynamically
     determine whether or not `echo' expands these escape characters by
     default.  `echo' does not interpret `--' to mean the end of
     options.

     `echo' interprets the following escape sequences:
    `\a'
          alert (bell)

    `\b'
          backspace

    `\c'
          suppress trailing newline

    `\e'
          escape

    `\f'
          form feed

    `\n'
          new line

    `\r'
          carriage return

    `\t'
          horizontal tab

    `\v'
          vertical tab

    `\\'
          backslash

    `\0NNN'
          the eight-bit character whose value is the octal value NNN
          (zero to three octal digits)

    `\xHH'
          the eight-bit character whose value is the hexadecimal value
          HH (one or two hex digits)

`enable'
          enable [-n] [-p] [-f FILENAME] [-ads] [NAME ...]
     Enable and disable builtin shell commands.  Disabling a builtin
     allows a disk command which has the same name as a shell builtin
     to be executed without specifying a full pathname, even though the
     shell normally searches for builtins before disk commands.  If
     `-n' is used, the NAMEs become disabled.  Otherwise NAMEs are
     enabled.  For example, to use the `test' binary found via `$PATH'
     instead of the shell builtin version, type `enable -n test'.

     If the `-p' option is supplied, or no NAME arguments appear, a
     list of shell builtins is printed.  With no other arguments, the
     list consists of all enabled shell builtins.  The `-a' option
     means to list each builtin with an indication of whether or not it
     is enabled.

     The `-f' option means to load the new builtin command NAME from
     shared object FILENAME, on systems that support dynamic loading.
     The `-d' option will delete a builtin loaded with `-f'.

     If there are no options, a list of the shell builtins is displayed.
     The `-s' option restricts `enable' to the POSIX special builtins.
     If `-s' is used with `-f', the new builtin becomes a special
     builtin (*note Special Builtins::).

     The return status is zero unless a NAME is not a shell builtin or
     there is an error loading a new builtin from a shared object.

`help'
          help [-s] [PATTERN]
     Display helpful information about builtin commands.  If PATTERN is
     specified, `help' gives detailed help on all commands matching
     PATTERN, otherwise a list of the builtins is printed.  The `-s'
     option restricts the information displayed to a short usage
     synopsis.  The return status is zero unless no command matches
     PATTERN.

`let'
          let EXPRESSION [EXPRESSION]
     The `let' builtin allows arithmetic to be performed on shell
     variables.  Each EXPRESSION is evaluated according to the rules
     given below in *note Shell Arithmetic::.  If the last EXPRESSION
     evaluates to 0, `let' returns 1; otherwise 0 is returned.

`local'
          local [OPTION] NAME[=VALUE] ...
     For each argument, a local variable named NAME is created, and
     assigned VALUE.  The OPTION can be any of the options accepted by
     `declare'.  `local' can only be used within a function; it makes
     the variable NAME have a visible scope restricted to that function
     and its children.  The return status is zero unless `local' is
     used outside a function, an invalid NAME is supplied, or NAME is a
     readonly variable.

`logout'
          logout [N]
     Exit a login shell, returning a status of N to the shell's parent.

`printf'
          `printf' [-v VAR] FORMAT [ARGUMENTS]
     Write the formatted ARGUMENTS to the standard output under the
     control of the FORMAT.  The FORMAT is a character string which
     contains three types of objects: plain characters, which are
     simply copied to standard output, character escape sequences,
     which are converted and copied to the standard output, and format
     specifications, each of which causes printing of the next
     successive ARGUMENT.  In addition to the standard `printf(1)'
     formats, `%b' causes `printf' to expand backslash escape sequences
     in the corresponding ARGUMENT, (except that `\c' terminates
     output, backslashes in `\'', `\"', and `\?' are not removed, and
     octal escapes beginning with `\0' may contain up to four digits),
     and `%q' causes `printf' to output the corresponding ARGUMENT in a
     format that can be reused as shell input.

     The `-v' option causes the output to be assigned to the variable
     VAR rather than being printed to the standard output.

     The FORMAT is reused as necessary to consume all of the ARGUMENTS.
     If the FORMAT requires more ARGUMENTS than are supplied, the extra
     format specifications behave as if a zero value or null string, as
     appropriate, had been supplied.  The return value is zero on
     success, non-zero on failure.

`read'
          read [-ers] [-a ANAME] [-d DELIM] [-n NCHARS] [-p PROMPT] [-t TIMEOUT] [-u FD] [NAME ...]
     One line is read from the standard input, or from the file
     descriptor FD supplied as an argument to the `-u' option, and the
     first word is assigned to the first NAME, the second word to the
     second NAME, and so on, with leftover words and their intervening
     separators assigned to the last NAME.  If there are fewer words
     read from the input stream than names, the remaining names are
     assigned empty values.  The characters in the value of the `IFS'
     variable are used to split the line into words.  The backslash
     character `\' may be used to remove any special meaning for the
     next character read and for line continuation.  If no names are
     supplied, the line read is assigned to the variable `REPLY'.  The
     return code is zero, unless end-of-file is encountered, `read'
     times out, or an invalid file descriptor is supplied as the
     argument to `-u'.  Options, if supplied, have the following
     meanings:

    `-a ANAME'
          The words are assigned to sequential indices of the array
          variable ANAME, starting at 0.  All elements are removed from
          ANAME before the assignment.  Other NAME arguments are
          ignored.

    `-d DELIM'
          The first character of DELIM is used to terminate the input
          line, rather than newline.

    `-e'
          Readline (*note Command Line Editing::) is used to obtain the
          line.

    `-n NCHARS'
          `read' returns after reading NCHARS characters rather than
          waiting for a complete line of input.

    `-p PROMPT'
          Display PROMPT, without a trailing newline, before attempting
          to read any input.  The prompt is displayed only if input is
          coming from a terminal.

    `-r'
          If this option is given, backslash does not act as an escape
          character.  The backslash is considered to be part of the
          line.  In particular, a backslash-newline pair may not be
          used as a line continuation.

    `-s'
          Silent mode.  If input is coming from a terminal, characters
          are not echoed.

    `-t TIMEOUT'
          Cause `read' to time out and return failure if a complete
          line of input is not read within TIMEOUT seconds.  This
          option has no effect if `read' is not reading input from the
          terminal or a pipe.

    `-u FD'
          Read input from file descriptor FD.


`shopt'
          shopt [-pqsu] [-o] [OPTNAME ...]
     Toggle the values of variables controlling optional shell behavior.
     With no options, or with the `-p' option, a list of all settable
     options is displayed, with an indication of whether or not each is
     set.  The `-p' option causes output to be displayed in a form that
     may be reused as input.  Other options have the following meanings:

    `-s'
          Enable (set) each OPTNAME.

    `-u'
          Disable (unset) each OPTNAME.

    `-q'
          Suppresses normal output; the return status indicates whether
          the OPTNAME is set or unset.  If multiple OPTNAME arguments
          are given with `-q', the return status is zero if all
          OPTNAMES are enabled; non-zero otherwise.

    `-o'
          Restricts the values of OPTNAME to be those defined for the
          `-o' option to the `set' builtin (*note The Set Builtin::).

     If either `-s' or `-u' is used with no OPTNAME arguments, the
     display is limited to those options which are set or unset,
     respectively.

     Unless otherwise noted, the `shopt' options are disabled (off) by
     default.

     The return status when listing options is zero if all OPTNAMES are
     enabled, non-zero otherwise.  When setting or unsetting options,
     the return status is zero unless an OPTNAME is not a valid shell
     option.

     The list of `shopt' options is:
    `cdable_vars'
          If this is set, an argument to the `cd' builtin command that
          is not a directory is assumed to be the name of a variable
          whose value is the directory to change to.

    `cdspell'
          If set, minor errors in the spelling of a directory component
          in a `cd' command will be corrected.  The errors checked for
          are transposed characters, a missing character, and a
          character too many.  If a correction is found, the corrected
          path is printed, and the command proceeds.  This option is
          only used by interactive shells.

    `checkhash'
          If this is set, Bash checks that a command found in the hash
          table exists before trying to execute it.  If a hashed
          command no longer exists, a normal path search is performed.

    `checkwinsize'
          If set, Bash checks the window size after each command and,
          if necessary, updates the values of `LINES' and `COLUMNS'.

    `cmdhist'
          If set, Bash attempts to save all lines of a multiple-line
          command in the same history entry.  This allows easy
          re-editing of multi-line commands.

    `compat31'
          If set, Bash changes its behavior to that of version 3.1 with
          respect to quoted arguments to the conditional command's =~
          operator.

    `dotglob'
          If set, Bash includes filenames beginning with a `.' in the
          results of filename expansion.

    `execfail'
          If this is set, a non-interactive shell will not exit if it
          cannot execute the file specified as an argument to the `exec'
          builtin command.  An interactive shell does not exit if `exec'
          fails.

    `expand_aliases'
          If set, aliases are expanded as described below under Aliases,
          *note Aliases::.  This option is enabled by default for
          interactive shells.

    `extdebug'
          If set, behavior intended for use by debuggers is enabled:

            1. The `-F' option to the `declare' builtin (*note Bash
               Builtins::) displays the source file name and line
               number corresponding to each function name supplied as
               an argument.

            2. If the command run by the `DEBUG' trap returns a
               non-zero value, the next command is skipped and not
               executed.

            3. If the command run by the `DEBUG' trap returns a value
               of 2, and the shell is executing in a subroutine (a
               shell function or a shell script executed by the `.' or
               `source' builtins), a call to `return' is simulated.

            4. `BASH_ARGC' and `BASH_ARGV' are updated as described in
               their descriptions (*note Bash Variables::).

            5. Function tracing is enabled:  command substitution,
               shell functions, and subshells invoked with `( COMMAND
               )' inherit the `DEBUG' and `RETURN' traps.

            6. Error tracing is enabled:  command substitution, shell
               functions, and subshells invoked with `( COMMAND )'
               inherit the `ERROR' trap.

    `extglob'
          If set, the extended pattern matching features described above
          (*note Pattern Matching::) are enabled.

    `extquote'
          If set, `$'STRING'' and `$"STRING"' quoting is performed
          within `${PARAMETER}' expansions enclosed in double quotes.
          This option is enabled by default.

    `failglob'
          If set, patterns which fail to match filenames during
          pathname expansion result in an expansion error.

    `force_fignore'
          If set, the suffixes specified by the `FIGNORE' shell variable
          cause words to be ignored when performing word completion
          even if the ignored words are the only possible completions.
          *Note Bash Variables::, for a description of `FIGNORE'.  This
          option is enabled by default.

    `gnu_errfmt'
          If set, shell error messages are written in the standard GNU
          error message format.

    `histappend'
          If set, the history list is appended to the file named by the
          value of the `HISTFILE' variable when the shell exits, rather
          than overwriting the file.

    `histreedit'
          If set, and Readline is being used, a user is given the
          opportunity to re-edit a failed history substitution.

    `histverify'
          If set, and Readline is being used, the results of history
          substitution are not immediately passed to the shell parser.
          Instead, the resulting line is loaded into the Readline
          editing buffer, allowing further modification.

    `hostcomplete'
          If set, and Readline is being used, Bash will attempt to
          perform hostname completion when a word containing a `@' is
          being completed (*note Commands For Completion::).  This
          option is enabled by default.

    `huponexit'
          If set, Bash will send `SIGHUP' to all jobs when an
          interactive login shell exits (*note Signals::).

    `interactive_comments'
          Allow a word beginning with `#' to cause that word and all
          remaining characters on that line to be ignored in an
          interactive shell.  This option is enabled by default.

    `lithist'
          If enabled, and the `cmdhist' option is enabled, multi-line
          commands are saved to the history with embedded newlines
          rather than using semicolon separators where possible.

    `login_shell'
          The shell sets this option if it is started as a login shell
          (*note Invoking Bash::).  The value may not be changed.

    `mailwarn'
          If set, and a file that Bash is checking for mail has been
          accessed since the last time it was checked, the message
          `"The mail in MAILFILE has been read"' is displayed.

    `no_empty_cmd_completion'
          If set, and Readline is being used, Bash will not attempt to
          search the `PATH' for possible completions when completion is
          attempted on an empty line.

    `nocaseglob'
          If set, Bash matches filenames in a case-insensitive fashion
          when performing filename expansion.

    `nocasematch'
          If set, Bash matches patterns in a case-insensitive fashion
          when performing matching while executing `case' or `[['
          conditional commands.

    `nullglob'
          If set, Bash allows filename patterns which match no files to
          expand to a null string, rather than themselves.

    `progcomp'
          If set, the programmable completion facilities (*note
          Programmable Completion::) are enabled.  This option is
          enabled by default.

    `promptvars'
          If set, prompt strings undergo parameter expansion, command
          substitution, arithmetic expansion, and quote removal after
          being expanded as described below (*note Printing a Prompt::).
          This option is enabled by default.

    `restricted_shell'
          The shell sets this option if it is started in restricted mode
          (*note The Restricted Shell::).  The value may not be changed.
          This is not reset when the startup files are executed,
          allowing the startup files to discover whether or not a shell
          is restricted.

    `shift_verbose'
          If this is set, the `shift' builtin prints an error message
          when the shift count exceeds the number of positional
          parameters.

    `sourcepath'
          If set, the `source' builtin uses the value of `PATH' to find
          the directory containing the file supplied as an argument.
          This option is enabled by default.

    `xpg_echo'
          If set, the `echo' builtin expands backslash-escape sequences
          by default.


     The return status when listing options is zero if all OPTNAMES are
     enabled, non-zero otherwise.  When setting or unsetting options,
     the return status is zero unless an OPTNAME is not a valid shell
     option.

`source'
          source FILENAME
     A synonym for `.' (*note Bourne Shell Builtins::).

`type'
          type [-afptP] [NAME ...]
     For each NAME, indicate how it would be interpreted if used as a
     command name.

     If the `-t' option is used, `type' prints a single word which is
     one of `alias', `function', `builtin', `file' or `keyword', if
     NAME is an alias, shell function, shell builtin, disk file, or
     shell reserved word, respectively.  If the NAME is not found, then
     nothing is printed, and `type' returns a failure status.

     If the `-p' option is used, `type' either returns the name of the
     disk file that would be executed, or nothing if `-t' would not
     return `file'.

     The `-P' option forces a path search for each NAME, even if `-t'
     would not return `file'.

     If a command is hashed, `-p' and `-P' print the hashed value, not
     necessarily the file that appears first in `$PATH'.

     If the `-a' option is used, `type' returns all of the places that
     contain an executable named FILE.  This includes aliases and
     functions, if and only if the `-p' option is not also used.

     If the `-f' option is used, `type' does not attempt to find shell
     functions, as with the `command' builtin.

     The return status is zero if any of the NAMES are found, non-zero
     if none are found.

`typeset'
          typeset [-afFrxi] [-p] [NAME[=VALUE] ...]
     The `typeset' command is supplied for compatibility with the Korn
     shell; however, it has been deprecated in favor of the `declare'
     builtin command.

`ulimit'
          ulimit [-acdefilmnpqrstuvxSH] [LIMIT]
     `ulimit' provides control over the resources available to processes
     started by the shell, on systems that allow such control.  If an
     option is given, it is interpreted as follows:
    `-S'
          Change and report the soft limit associated with a resource.

    `-H'
          Change and report the hard limit associated with a resource.

    `-a'
          All current limits are reported.

    `-c'
          The maximum size of core files created.

    `-d'
          The maximum size of a process's data segment.

    `-e'
          The maximum scheduling priority ("nice").

    `-f'
          The maximum size of files written by the shell and its
          children.

    `-i'
          The maximum number of pending signals.

    `-l'
          The maximum size that may be locked into memory.

    `-m'
          The maximum resident set size.

    `-n'
          The maximum number of open file descriptors.

    `-p'
          The pipe buffer size.

    `-q'
          The maximum number of bytes in POSIX message queues.

    `-r'
          The maximum real-time scheduling priority.

    `-s'
          The maximum stack size.

    `-t'
          The maximum amount of cpu time in seconds.

    `-u'
          The maximum number of processes available to a single user.

    `-v'
          The maximum amount of virtual memory available to the process.

    `-x'
          The maximum number of file locks.


     If LIMIT is given, it is the new value of the specified resource;
     the special LIMIT values `hard', `soft', and `unlimited' stand for
     the current hard limit, the current soft limit, and no limit,
     respectively.  Otherwise, the current value of the soft limit for
     the specified resource is printed, unless the `-H' option is
     supplied.  When setting new limits, if neither `-H' nor `-S' is
     supplied, both the hard and soft limits are set.  If no option is
     given, then `-f' is assumed.  Values are in 1024-byte increments,
     except for `-t', which is in seconds, `-p', which is in units of
     512-byte blocks, and `-n' and `-u', which are unscaled values.

     The return status is zero unless an invalid option or argument is
     supplied, or an error occurs while setting a new limit.

`unalias'
          unalias [-a] [NAME ... ]

     Remove each NAME from the list of aliases.  If `-a' is supplied,
     all aliases are removed.  Aliases are described in *note Aliases::.



File: bash.info,  Node: The Set Builtin,  Next: Special Builtins,  Prev: Bash Builtins,  Up: Shell Builtin Commands

4.3 The Set Builtin
===================

This builtin is so complicated that it deserves its own section.

`set'
          set [--abefhkmnptuvxBCHP] [-o OPTION] [ARGUMENT ...]

     If no options or arguments are supplied, `set' displays the names
     and values of all shell variables and functions, sorted according
     to the current locale, in a format that may be reused as input for
     setting or resetting the currently-set variables.  Read-only
     variables cannot be reset.  In POSIX mode, only shell variables
     are listed.

     When options are supplied, they set or unset shell attributes.
     Options, if specified, have the following meanings:

    `-a'
          Mark variables and function which are modified or created for
          export to the environment of subsequent commands.

    `-b'
          Cause the status of terminated background jobs to be reported
          immediately, rather than before printing the next primary
          prompt.

    `-e'
          Exit immediately if a simple command (*note Simple
          Commands::) exits with a non-zero status, unless the command
          that fails is part of the command list immediately following
          a `while' or `until' keyword, part of the test in an `if'
          statement, part of a `&&' or `||' list, or if the command's
          return status is being inverted using `!'.  A trap on `ERR',
          if set, is executed before the shell exits.

    `-f'
          Disable file name generation (globbing).

    `-h'
          Locate and remember (hash) commands as they are looked up for
          execution.  This option is enabled by default.

    `-k'
          All arguments in the form of assignment statements are placed
          in the environment for a command, not just those that precede
          the command name.

    `-m'
          Job control is enabled (*note Job Control::).

    `-n'
          Read commands but do not execute them; this may be used to
          check a script for syntax errors.  This option is ignored by
          interactive shells.

    `-o OPTION-NAME'
          Set the option corresponding to OPTION-NAME:

         `allexport'
               Same as `-a'.

         `braceexpand'
               Same as `-B'.

         `emacs'
               Use an `emacs'-style line editing interface (*note
               Command Line Editing::).

         `errexit'
               Same as `-e'.

         `errtrace'
               Same as `-E'.

         `functrace'
               Same as `-T'.

         `hashall'
               Same as `-h'.

         `histexpand'
               Same as `-H'.

         `history'
               Enable command history, as described in *note Bash
               History Facilities::.  This option is on by default in
               interactive shells.

         `ignoreeof'
               An interactive shell will not exit upon reading EOF.

         `keyword'
               Same as `-k'.

         `monitor'
               Same as `-m'.

         `noclobber'
               Same as `-C'.

         `noexec'
               Same as `-n'.

         `noglob'
               Same as `-f'.

         `nolog'
               Currently ignored.

         `notify'
               Same as `-b'.

         `nounset'
               Same as `-u'.

         `onecmd'
               Same as `-t'.

         `physical'
               Same as `-P'.

         `pipefail'
               If set, the return value of a pipeline is the value of
               the last (rightmost) command to exit with a non-zero
               status, or zero if all commands in the pipeline exit
               successfully.  This option is disabled by default.

         `posix'
               Change the behavior of Bash where the default operation
               differs from the POSIX standard to match the standard
               (*note Bash POSIX Mode::).  This is intended to make
               Bash behave as a strict superset of that standard.

         `privileged'
               Same as `-p'.

         `verbose'
               Same as `-v'.

         `vi'
               Use a `vi'-style line editing interface.

         `xtrace'
               Same as `-x'.

    `-p'
          Turn on privileged mode.  In this mode, the `$BASH_ENV' and
          `$ENV' files are not processed, shell functions are not
          inherited from the environment, and the `SHELLOPTS' variable,
          if it appears in the environment, is ignored.  If the shell
          is started with the effective user (group) id not equal to the
          real user (group) id, and the `-p' option is not supplied,
          these actions are taken and the effective user id is set to
          the real user id.  If the `-p' option is supplied at startup,
          the effective user id is not reset.  Turning this option off
          causes the effective user and group ids to be set to the real
          user and group ids.

    `-t'
          Exit after reading and executing one command.

    `-u'
          Treat unset variables as an error when performing parameter
          expansion.  An error message will be written to the standard
          error, and a non-interactive shell will exit.

    `-v'
          Print shell input lines as they are read.

    `-x'
          Print a trace of simple commands, `for' commands, `case'
          commands, `select' commands, and arithmetic `for' commands
          and their arguments or associated word lists after they are
          expanded and before they are executed.  The value of the `PS4'
          variable is expanded and the resultant value is printed before
          the command and its expanded arguments.

    `-B'
          The shell will perform brace expansion (*note Brace
          Expansion::).  This option is on by default.

    `-C'
          Prevent output redirection using `>', `>&', and `<>' from
          overwriting existing files.

    `-E'
          If set, any trap on `ERR' is inherited by shell functions,
          command substitutions, and commands executed in a subshell
          environment.  The `ERR' trap is normally not inherited in
          such cases.

    `-H'
          Enable `!' style history substitution (*note History
          Interaction::).  This option is on by default for interactive
          shells.

    `-P'
          If set, do not follow symbolic links when performing commands
          such as `cd' which change the current directory.  The
          physical directory is used instead.  By default, Bash follows
          the logical chain of directories when performing commands
          which change the current directory.

          For example, if `/usr/sys' is a symbolic link to
          `/usr/local/sys' then:
               $ cd /usr/sys; echo $PWD
               /usr/sys
               $ cd ..; pwd
               /usr

          If `set -P' is on, then:
               $ cd /usr/sys; echo $PWD
               /usr/local/sys
               $ cd ..; pwd
               /usr/local

    `-T'
          If set, any trap on `DEBUG' and `RETURN' are inherited by
          shell functions, command substitutions, and commands executed
          in a subshell environment.  The `DEBUG' and `RETURN' traps
          are normally not inherited in such cases.

    `--'
          If no arguments follow this option, then the positional
          parameters are unset.  Otherwise, the positional parameters
          are set to the ARGUMENTS, even if some of them begin with a
          `-'.

    `-'
          Signal the end of options, cause all remaining ARGUMENTS to
          be assigned to the positional parameters.  The `-x' and `-v'
          options are turned off.  If there are no arguments, the
          positional parameters remain unchanged.

     Using `+' rather than `-' causes these options to be turned off.
     The options can also be used upon invocation of the shell.  The
     current set of options may be found in `$-'.

     The remaining N ARGUMENTS are positional parameters and are
     assigned, in order, to `$1', `$2', ...  `$N'.  The special
     parameter `#' is set to N.

     The return status is always zero unless an invalid option is
     supplied.


File: bash.info,  Node: Special Builtins,  Prev: The Set Builtin,  Up: Shell Builtin Commands

4.4 Special Builtins
====================

For historical reasons, the POSIX standard has classified several
builtin commands as _special_.  When Bash is executing in POSIX mode,
the special builtins differ from other builtin commands in three
respects:

  1. Special builtins are found before shell functions during command
     lookup.

  2. If a special builtin returns an error status, a non-interactive
     shell exits.

  3. Assignment statements preceding the command stay in effect in the
     shell environment after the command completes.

   When Bash is not executing in POSIX mode, these builtins behave no
differently than the rest of the Bash builtin commands.  The Bash POSIX
mode is described in *note Bash POSIX Mode::.

   These are the POSIX special builtins:
     break : . continue eval exec exit export readonly return set
     shift trap unset


File: bash.info,  Node: Shell Variables,  Next: Bash Features,  Prev: Shell Builtin Commands,  Up: Top

5 Shell Variables
*****************

* Menu:

* Bourne Shell Variables::	Variables which Bash uses in the same way
				as the Bourne Shell.
* Bash Variables::		List of variables that exist in Bash.

   This chapter describes the shell variables that Bash uses.  Bash
automatically assigns default values to a number of variables.


File: bash.info,  Node: Bourne Shell Variables,  Next: Bash Variables,  Up: Shell Variables

5.1 Bourne Shell Variables
==========================

Bash uses certain shell variables in the same way as the Bourne shell.
In some cases, Bash assigns a default value to the variable.

`CDPATH'
     A colon-separated list of directories used as a search path for
     the `cd' builtin command.

`HOME'
     The current user's home directory; the default for the `cd' builtin
     command.  The value of this variable is also used by tilde
     expansion (*note Tilde Expansion::).

`IFS'
     A list of characters that separate fields; used when the shell
     splits words as part of expansion.

`MAIL'
     If this parameter is set to a filename and the `MAILPATH' variable
     is not set, Bash informs the user of the arrival of mail in the
     specified file.

`MAILPATH'
     A colon-separated list of filenames which the shell periodically
     checks for new mail.  Each list entry can specify the message that
     is printed when new mail arrives in the mail file by separating
     the file name from the message with a `?'.  When used in the text
     of the message, `$_' expands to the name of the current mail file.

`OPTARG'
     The value of the last option argument processed by the `getopts'
     builtin.

`OPTIND'
     The index of the last option argument processed by the `getopts'
     builtin.

`PATH'
     A colon-separated list of directories in which the shell looks for
     commands.  A zero-length (null) directory name in the value of
     `PATH' indicates the current directory.  A null directory name may
     appear as two adjacent colons, or as an initial or trailing colon.

`PS1'
     The primary prompt string.  The default value is `\s-\v\$ '.
     *Note Printing a Prompt::, for the complete list of escape
     sequences that are expanded before `PS1' is displayed.

`PS2'
     The secondary prompt string.  The default value is `> '.



File: bash.info,  Node: Bash Variables,  Prev: Bourne Shell Variables,  Up: Shell Variables

5.2 Bash Variables
==================

These variables are set or used by Bash, but other shells do not
normally treat them specially.

   A few variables used by Bash are described in different chapters:
variables for controlling the job control facilities (*note Job Control
Variables::).

`BASH'
     The full pathname used to execute the current instance of Bash.

`BASH_ARGC'
     An array variable whose values are the number of parameters in each
     frame of the current bash execution call stack.  The number of
     parameters to the current subroutine (shell function or script
     executed with `.' or `source') is at the top of the stack.  When a
     subroutine is executed, the number of parameters passed is pushed
     onto `BASH_ARGC'.  The shell sets `BASH_ARGC' only when in
     extended debugging mode (see *note Bash Builtins:: for a
     description of the `extdebug' option to the `shopt' builtin).

`BASH_ARGV'
     An array variable containing all of the parameters in the current
     bash execution call stack.  The final parameter of the last
     subroutine call is at the top of the stack; the first parameter of
     the initial call is at the bottom.  When a subroutine is executed,
     the parameters supplied are pushed onto `BASH_ARGV'.  The shell
     sets `BASH_ARGV' only when in extended debugging mode (see *note
     Bash Builtins:: for a description of the `extdebug' option to the
     `shopt' builtin).

`BASH_COMMAND'
     The command currently being executed or about to be executed,
     unless the shell is executing a command as the result of a trap,
     in which case it is the command executing at the time of the trap.

`BASH_ENV'
     If this variable is set when Bash is invoked to execute a shell
     script, its value is expanded and used as the name of a startup
     file to read before executing the script.  *Note Bash Startup
     Files::.

`BASH_EXECUTION_STRING'
     The command argument to the `-c' invocation option.

`BASH_LINENO'
     An array variable whose members are the line numbers in source
     files corresponding to each member of FUNCNAME.
     `${BASH_LINENO[$i]}' is the line number in the source file where
     `${FUNCNAME[$i]}' was called.  The corresponding source file name
     is `${BASH_SOURCE[$i]}'.  Use `LINENO' to obtain the current line
     number.

`BASH_REMATCH'
     An array variable whose members are assigned by the `=~' binary
     operator to the `[[' conditional command (*note Conditional
     Constructs::).  The element with index 0 is the portion of the
     string matching the entire regular expression.  The element with
     index N is the portion of the string matching the Nth
     parenthesized subexpression.  This variable is read-only.

`BASH_SOURCE'
     An array variable whose members are the source filenames
     corresponding to the elements in the `FUNCNAME' array variable.

`BASH_SUBSHELL'
     Incremented by one each time a subshell or subshell environment is
     spawned.  The initial value is 0.

`BASH_VERSINFO'
     A readonly array variable (*note Arrays::) whose members hold
     version information for this instance of Bash.  The values
     assigned to the array members are as follows:

    `BASH_VERSINFO[0]'
          The major version number (the RELEASE).

    `BASH_VERSINFO[1]'
          The minor version number (the VERSION).

    `BASH_VERSINFO[2]'
          The patch level.

    `BASH_VERSINFO[3]'
          The build version.

    `BASH_VERSINFO[4]'
          The release status (e.g., BETA1).

    `BASH_VERSINFO[5]'
          The value of `MACHTYPE'.


`BASH_VERSION'
     The version number of the current instance of Bash.

`COLUMNS'
     Used by the `select' builtin command to determine the terminal
     width when printing selection lists.  Automatically set upon
     receipt of a `SIGWINCH'.

`COMP_CWORD'
     An index into `${COMP_WORDS}' of the word containing the current
     cursor position.  This variable is available only in shell
     functions invoked by the programmable completion facilities (*note
     Programmable Completion::).

`COMP_LINE'
     The current command line.  This variable is available only in
     shell functions and external commands invoked by the programmable
     completion facilities (*note Programmable Completion::).

`COMP_POINT'
     The index of the current cursor position relative to the beginning
     of the current command.  If the current cursor position is at the
     end of the current command, the value of this variable is equal to
     `${#COMP_LINE}'.  This variable is available only in shell
     functions and external commands invoked by the programmable
     completion facilities (*note Programmable Completion::).

`COMP_WORDBREAKS'
     The set of characters that the Readline library treats as word
     separators when performing word completion.  If `COMP_WORDBREAKS'
     is unset, it loses its special properties, even if it is
     subsequently reset.

`COMP_WORDS'
     An array variable consisting of the individual words in the
     current command line.  The words are split on shell metacharacters
     as the shell parser would separate them.  This variable is
     available only in shell functions invoked by the programmable
     completion facilities (*note Programmable Completion::).

`COMPREPLY'
     An array variable from which Bash reads the possible completions
     generated by a shell function invoked by the programmable
     completion facility (*note Programmable Completion::).

`DIRSTACK'
     An array variable containing the current contents of the directory
     stack.  Directories appear in the stack in the order they are
     displayed by the `dirs' builtin.  Assigning to members of this
     array variable may be used to modify directories already in the
     stack, but the `pushd' and `popd' builtins must be used to add and
     remove directories.  Assignment to this variable will not change
     the current directory.  If `DIRSTACK' is unset, it loses its
     special properties, even if it is subsequently reset.

`EMACS'
     If Bash finds this variable in the environment when the shell
     starts with value `t', it assumes that the shell is running in an
     emacs shell buffer and disables line editing.

`EUID'
     The numeric effective user id of the current user.  This variable
     is readonly.

`FCEDIT'
     The editor used as a default by the `-e' option to the `fc'
     builtin command.

`FIGNORE'
     A colon-separated list of suffixes to ignore when performing
     filename completion.  A file name whose suffix matches one of the
     entries in `FIGNORE' is excluded from the list of matched file
     names.  A sample value is `.o:~'

`FUNCNAME'
     An array variable containing the names of all shell functions
     currently in the execution call stack.  The element with index 0
     is the name of any currently-executing shell function.  The
     bottom-most element is "main".  This variable exists only when a
     shell function is executing.  Assignments to `FUNCNAME' have no
     effect and return an error status.  If `FUNCNAME' is unset, it
     loses its special properties, even if it is subsequently reset.

`GLOBIGNORE'
     A colon-separated list of patterns defining the set of filenames to
     be ignored by filename expansion.  If a filename matched by a
     filename expansion pattern also matches one of the patterns in
     `GLOBIGNORE', it is removed from the list of matches.

`GROUPS'
     An array variable containing the list of groups of which the
     current user is a member.  Assignments to `GROUPS' have no effect
     and return an error status.  If `GROUPS' is unset, it loses its
     special properties, even if it is subsequently reset.

`histchars'
     Up to three characters which control history expansion, quick
     substitution, and tokenization (*note History Interaction::).  The
     first character is the HISTORY EXPANSION character, that is, the
     character which signifies the start of a history expansion,
     normally `!'.  The second character is the character which
     signifies `quick substitution' when seen as the first character on
     a line, normally `^'.  The optional third character is the
     character which indicates that the remainder of the line is a
     comment when found as the first character of a word, usually `#'.
     The history comment character causes history substitution to be
     skipped for the remaining words on the line.  It does not
     necessarily cause the shell parser to treat the rest of the line
     as a comment.

`HISTCMD'
     The history number, or index in the history list, of the current
     command.  If `HISTCMD' is unset, it loses its special properties,
     even if it is subsequently reset.

`HISTCONTROL'
     A colon-separated list of values controlling how commands are
     saved on the history list.  If the list of values includes
     `ignorespace', lines which begin with a space character are not
     saved in the history list.  A value of `ignoredups' causes lines
     which match the previous history entry to not be saved.  A value
     of `ignoreboth' is shorthand for `ignorespace' and `ignoredups'.
     A value of `erasedups' causes all previous lines matching the
     current line to be removed from the history list before that line
     is saved.  Any value not in the above list is ignored.  If
     `HISTCONTROL' is unset, or does not include a valid value, all
     lines read by the shell parser are saved on the history list,
     subject to the value of `HISTIGNORE'.  The second and subsequent
     lines of a multi-line compound command are not tested, and are
     added to the history regardless of the value of `HISTCONTROL'.

`HISTFILE'
     The name of the file to which the command history is saved.  The
     default value is `~/.bash_history'.

`HISTFILESIZE'
     The maximum number of lines contained in the history file.  When
     this variable is assigned a value, the history file is truncated,
     if necessary, by removing the oldest entries, to contain no more
     than that number of lines.  The history file is also truncated to
     this size after writing it when an interactive shell exits.  The
     default value is 500.

`HISTIGNORE'
     A colon-separated list of patterns used to decide which command
     lines should be saved on the history list.  Each pattern is
     anchored at the beginning of the line and must match the complete
     line (no implicit `*' is appended).  Each pattern is tested
     against the line after the checks specified by `HISTCONTROL' are
     applied.  In addition to the normal shell pattern matching
     characters, `&' matches the previous history line.  `&' may be
     escaped using a backslash; the backslash is removed before
     attempting a match.  The second and subsequent lines of a
     multi-line compound command are not tested, and are added to the
     history regardless of the value of `HISTIGNORE'.

     `HISTIGNORE' subsumes the function of `HISTCONTROL'.  A pattern of
     `&' is identical to `ignoredups', and a pattern of `[ ]*' is
     identical to `ignorespace'.  Combining these two patterns,
     separating them with a colon, provides the functionality of
     `ignoreboth'.

`HISTSIZE'
     The maximum number of commands to remember on the history list.
     The default value is 500.

`HISTTIMEFORMAT'
     If this variable is set and not null, its value is used as a
     format string for STRFTIME to print the time stamp associated with
     each history entry displayed by the `history' builtin.  If this
     variable is set, time stamps are written to the history file so
     they may be preserved across shell sessions.

`HOSTFILE'
     Contains the name of a file in the same format as `/etc/hosts' that
     should be read when the shell needs to complete a hostname.  The
     list of possible hostname completions may be changed while the
     shell is running; the next time hostname completion is attempted
     after the value is changed, Bash adds the contents of the new file
     to the existing list.  If `HOSTFILE' is set, but has no value,
     Bash attempts to read `/etc/hosts' to obtain the list of possible
     hostname completions.  When `HOSTFILE' is unset, the hostname list
     is cleared.

`HOSTNAME'
     The name of the current host.

`HOSTTYPE'
     A string describing the machine Bash is running on.

`IGNOREEOF'
     Controls the action of the shell on receipt of an `EOF' character
     as the sole input.  If set, the value denotes the number of
     consecutive `EOF' characters that can be read as the first
     character on an input line before the shell will exit.  If the
     variable exists but does not have a numeric value (or has no
     value) then the default is 10.  If the variable does not exist,
     then `EOF' signifies the end of input to the shell.  This is only
     in effect for interactive shells.

`INPUTRC'
     The name of the Readline initialization file, overriding the
     default of `~/.inputrc'.

`LANG'
     Used to determine the locale category for any category not
     specifically selected with a variable starting with `LC_'.

`LC_ALL'
     This variable overrides the value of `LANG' and any other `LC_'
     variable specifying a locale category.

`LC_COLLATE'
     This variable determines the collation order used when sorting the
     results of filename expansion, and determines the behavior of
     range expressions, equivalence classes, and collating sequences
     within filename expansion and pattern matching (*note Filename
     Expansion::).

`LC_CTYPE'
     This variable determines the interpretation of characters and the
     behavior of character classes within filename expansion and pattern
     matching (*note Filename Expansion::).

`LC_MESSAGES'
     This variable determines the locale used to translate double-quoted
     strings preceded by a `$' (*note Locale Translation::).

`LC_NUMERIC'
     This variable determines the locale category used for number
     formatting.

`LINENO'
     The line number in the script or shell function currently
     executing.

`LINES'
     Used by the `select' builtin command to determine the column length
     for printing selection lists.  Automatically set upon receipt of a
     `SIGWINCH'.

`MACHTYPE'
     A string that fully describes the system type on which Bash is
     executing, in the standard GNU CPU-COMPANY-SYSTEM format.

`MAILCHECK'
     How often (in seconds) that the shell should check for mail in the
     files specified in the `MAILPATH' or `MAIL' variables.  The
     default is 60 seconds.  When it is time to check for mail, the
     shell does so before displaying the primary prompt.  If this
     variable is unset, or set to a value that is not a number greater
     than or equal to zero, the shell disables mail checking.

`OLDPWD'
     The previous working directory as set by the `cd' builtin.

`OPTERR'
     If set to the value 1, Bash displays error messages generated by
     the `getopts' builtin command.

`OSTYPE'
     A string describing the operating system Bash is running on.

`PIPESTATUS'
     An array variable (*note Arrays::) containing a list of exit
     status values from the processes in the most-recently-executed
     foreground pipeline (which may contain only a single command).

`POSIXLY_CORRECT'
     If this variable is in the environment when `bash' starts, the
     shell enters POSIX mode (*note Bash POSIX Mode::) before reading
     the startup files, as if the `--posix' invocation option had been
     supplied.  If it is set while the shell is running, `bash' enables
     POSIX mode, as if the command
          `set -o posix'
     had been executed.

`PPID'
     The process ID of the shell's parent process.  This variable is
     readonly.

`PROMPT_COMMAND'
     If set, the value is interpreted as a command to execute before
     the printing of each primary prompt (`$PS1').

`PS3'
     The value of this variable is used as the prompt for the `select'
     command.  If this variable is not set, the `select' command
     prompts with `#? '

`PS4'
     The value is the prompt printed before the command line is echoed
     when the `-x' option is set (*note The Set Builtin::).  The first
     character of `PS4' is replicated multiple times, as necessary, to
     indicate multiple levels of indirection.  The default is `+ '.

`PWD'
     The current working directory as set by the `cd' builtin.

`RANDOM'
     Each time this parameter is referenced, a random integer between 0
     and 32767 is generated.  Assigning a value to this variable seeds
     the random number generator.

`REPLY'
     The default variable for the `read' builtin.

`SECONDS'
     This variable expands to the number of seconds since the shell was
     started.  Assignment to this variable resets the count to the
     value assigned, and the expanded value becomes the value assigned
     plus the number of seconds since the assignment.

`SHELL'
     The full pathname to the shell is kept in this environment
     variable.  If it is not set when the shell starts, Bash assigns to
     it the full pathname of the current user's login shell.

`SHELLOPTS'
     A colon-separated list of enabled shell options.  Each word in the
     list is a valid argument for the `-o' option to the `set' builtin
     command (*note The Set Builtin::).  The options appearing in
     `SHELLOPTS' are those reported as `on' by `set -o'.  If this
     variable is in the environment when Bash starts up, each shell
     option in the list will be enabled before reading any startup
     files.  This variable is readonly.

`SHLVL'
     Incremented by one each time a new instance of Bash is started.
     This is intended to be a count of how deeply your Bash shells are
     nested.

`TIMEFORMAT'
     The value of this parameter is used as a format string specifying
     how the timing information for pipelines prefixed with the `time'
     reserved word should be displayed.  The `%' character introduces an
     escape sequence that is expanded to a time value or other
     information.  The escape sequences and their meanings are as
     follows; the braces denote optional portions.

    `%%'
          A literal `%'.

    `%[P][l]R'
          The elapsed time in seconds.

    `%[P][l]U'
          The number of CPU seconds spent in user mode.

    `%[P][l]S'
          The number of CPU seconds spent in system mode.

    `%P'
          The CPU percentage, computed as (%U + %S) / %R.

     The optional P is a digit specifying the precision, the number of
     fractional digits after a decimal point.  A value of 0 causes no
     decimal point or fraction to be output.  At most three places
     after the decimal point may be specified; values of P greater than
     3 are changed to 3.  If P is not specified, the value 3 is used.

     The optional `l' specifies a longer format, including minutes, of
     the form MMmSS.FFs.  The value of P determines whether or not the
     fraction is included.

     If this variable is not set, Bash acts as if it had the value
          `$'\nreal\t%3lR\nuser\t%3lU\nsys\t%3lS''
     If the value is null, no timing information is displayed.  A
     trailing newline is added when the format string is displayed.

`TMOUT'
     If set to a value greater than zero, `TMOUT' is treated as the
     default timeout for the `read' builtin (*note Bash Builtins::).
     The `select' command (*note Conditional Constructs::) terminates
     if input does not arrive after `TMOUT' seconds when input is coming
     from a terminal.

     In an interative shell, the value is interpreted as the number of
     seconds to wait for input after issuing the primary prompt when
     the shell is interactive.  Bash terminates after that number of
     seconds if input does not arrive.

`TMPDIR'
     If set, Bash uses its value as the name of a directory in which
     Bash creates temporary files for the shell's use.

`UID'
     The numeric real user id of the current user.  This variable is
     readonly.



File: bash.info,  Node: Bash Features,  Next: Job Control,  Prev: Shell Variables,  Up: Top

6 Bash Features
***************

This section describes features unique to Bash.

* Menu:

* Invoking Bash::		Command line options that you can give
				to Bash.
* Bash Startup Files::		When and how Bash executes scripts.
* Interactive Shells::		What an interactive shell is.
* Bash Conditional Expressions::	Primitives used in composing expressions for
				the `test' builtin.
* Shell Arithmetic::		Arithmetic on shell variables.
* Aliases::			Substituting one command for another.
* Arrays::			Array Variables.
* The Directory Stack::		History of visited directories.
* Printing a Prompt::		Controlling the PS1 string.
* The Restricted Shell::	A more controlled mode of shell execution.
* Bash POSIX Mode::		Making Bash behave more closely to what
				the POSIX standard specifies.


File: bash.info,  Node: Invoking Bash,  Next: Bash Startup Files,  Up: Bash Features

6.1 Invoking Bash
=================

     bash [long-opt] [-ir] [-abefhkmnptuvxdBCDHP] [-o OPTION] [-O SHOPT_OPTION] [ARGUMENT ...]
     bash [long-opt] [-abefhkmnptuvxdBCDHP] [-o OPTION] [-O SHOPT_OPTION] -c STRING [ARGUMENT ...]
     bash [long-opt] -s [-abefhkmnptuvxdBCDHP] [-o OPTION] [-O SHOPT_OPTION] [ARGUMENT ...]

   In addition to the single-character shell command-line options
(*note The Set Builtin::), there are several multi-character options
that you can use.  These options must appear on the command line before
the single-character options to be recognized.

`--debugger'
     Arrange for the debugger profile to be executed before the shell
     starts.  Turns on extended debugging mode (see *note Bash
     Builtins:: for a description of the `extdebug' option to the
     `shopt' builtin) and shell function tracing (see *note The Set
     Builtin:: for a description of the `-o functrace' option).

`--dump-po-strings'
     A list of all double-quoted strings preceded by `$' is printed on
     the standard output in the GNU `gettext' PO (portable object) file
     format.  Equivalent to `-D' except for the output format.

`--dump-strings'
     Equivalent to `-D'.

`--help'
     Display a usage message on standard output and exit sucessfully.

`--init-file FILENAME'
`--rcfile FILENAME'
     Execute commands from FILENAME (instead of `~/.bashrc') in an
     interactive shell.

`--login'
     Equivalent to `-l'.

`--noediting'
     Do not use the GNU Readline library (*note Command Line Editing::)
     to read  command lines when the shell is interactive.

`--noprofile'
     Don't load the system-wide startup file `/etc/profile' or any of
     the personal initialization files `~/.bash_profile',
     `~/.bash_login', or `~/.profile' when Bash is invoked as a login
     shell.

`--norc'
     Don't read the `~/.bashrc' initialization file in an interactive
     shell.  This is on by default if the shell is invoked as `sh'.

`--posix'
     Change the behavior of Bash where the default operation differs
     from the POSIX standard to match the standard.  This is intended
     to make Bash behave as a strict superset of that standard.  *Note
     Bash POSIX Mode::, for a description of the Bash POSIX mode.

`--restricted'
     Make the shell a restricted shell (*note The Restricted Shell::).

`--verbose'
     Equivalent to `-v'.  Print shell input lines as they're read.

`--version'
     Show version information for this instance of Bash on the standard
     output and exit successfully.


   There are several single-character options that may be supplied at
invocation which are not available with the `set' builtin.

`-c STRING'
     Read and execute commands from STRING after processing the
     options, then exit.  Any remaining arguments are assigned to the
     positional parameters, starting with `$0'.

`-i'
     Force the shell to run interactively.  Interactive shells are
     described in *note Interactive Shells::.

`-l'
     Make this shell act as if it had been directly invoked by login.
     When the shell is interactive, this is equivalent to starting a
     login shell with `exec -l bash'.  When the shell is not
     interactive, the login shell startup files will be executed.
     `exec bash -l' or `exec bash --login' will replace the current
     shell with a Bash login shell.  *Note Bash Startup Files::, for a
     description of the special behavior of a login shell.

`-r'
     Make the shell a restricted shell (*note The Restricted Shell::).

`-s'
     If this option is present, or if no arguments remain after option
     processing, then commands are read from the standard input.  This
     option allows the positional parameters to be set when invoking an
     interactive shell.

`-D'
     A list of all double-quoted strings preceded by `$' is printed on
     the standard output.  These are the strings that are subject to
     language translation when the current locale is not `C' or `POSIX'
     (*note Locale Translation::).  This implies the `-n' option; no
     commands will be executed.

`[-+]O [SHOPT_OPTION]'
     SHOPT_OPTION is one of the shell options accepted by the `shopt'
     builtin (*note Shell Builtin Commands::).  If SHOPT_OPTION is
     present, `-O' sets the value of that option; `+O' unsets it.  If
     SHOPT_OPTION is not supplied, the names and values of the shell
     options accepted by `shopt' are printed on the standard output.
     If the invocation option is `+O', the output is displayed in a
     format that may be reused as input.

`--'
     A `--' signals the end of options and disables further option
     processing.  Any arguments after the `--' are treated as filenames
     and arguments.


   A _login_ shell is one whose first character of argument zero is
`-', or one invoked with the `--login' option.

   An _interactive_ shell is one started without non-option arguments,
unless `-s' is specified, without specifying the `-c' option, and whose
input and output are both connected to terminals (as determined by
`isatty(3)'), or one started with the `-i' option.  *Note Interactive
Shells::, for more information.

   If arguments remain after option processing, and neither the `-c'
nor the `-s' option has been supplied, the first argument is assumed to
be the name of a file containing shell commands (*note Shell Scripts::).
When Bash is invoked in this fashion, `$0' is set to the name of the
file, and the positional parameters are set to the remaining arguments.
Bash reads and executes commands from this file, then exits.  Bash's
exit status is the exit status of the last command executed in the
script.  If no commands are executed, the exit status is 0.


File: bash.info,  Node: Bash Startup Files,  Next: Interactive Shells,  Prev: Invoking Bash,  Up: Bash Features

6.2 Bash Startup Files
======================

This section describs how Bash executes its startup files.  If any of
the files exist but cannot be read, Bash reports an error.  Tildes are
expanded in file names as described above under Tilde Expansion (*note
Tilde Expansion::).

   Interactive shells are described in *note Interactive Shells::.

Invoked as an interactive login shell, or with `--login'
........................................................

When Bash is invoked as an interactive login shell, or as a
non-interactive shell with the `--login' option, it first reads and
executes commands from the file `/etc/profile', if that file exists.
After reading that file, it looks for `~/.bash_profile',
`~/.bash_login', and `~/.profile', in that order, and reads and
executes commands from the first one that exists and is readable.  The
`--noprofile' option may be used when the shell is started to inhibit
this behavior.

   When a login shell exits, Bash reads and executes commands from the
file `~/.bash_logout', if it exists.

Invoked as an interactive non-login shell
.........................................

When an interactive shell that is not a login shell is started, Bash
reads and executes commands from `~/.bashrc', if that file exists.
This may be inhibited by using the `--norc' option.  The `--rcfile
FILE' option will force Bash to read and execute commands from FILE
instead of `~/.bashrc'.

   So, typically, your `~/.bash_profile' contains the line
     `if [ -f ~/.bashrc ]; then . ~/.bashrc; fi'
   after (or before) any login-specific initializations.

Invoked non-interactively
.........................

When Bash is started non-interactively, to run a shell script, for
example, it looks for the variable `BASH_ENV' in the environment,
expands its value if it appears there, and uses the expanded value as
the name of a file to read and execute.  Bash behaves as if the
following command were executed:
     `if [ -n "$BASH_ENV" ]; then . "$BASH_ENV"; fi'
   but the value of the `PATH' variable is not used to search for the
file name.

   As noted above, if a non-interactive shell is invoked with the
`--login' option, Bash attempts to read and execute commands from the
login shell startup files.

Invoked with name `sh'
......................

If Bash is invoked with the name `sh', it tries to mimic the startup
behavior of historical versions of `sh' as closely as possible, while
conforming to the POSIX standard as well.

   When invoked as an interactive login shell, or as a non-interactive
shell with the `--login' option, it first attempts to read and execute
commands from `/etc/profile' and `~/.profile', in that order.  The
`--noprofile' option may be used to inhibit this behavior.  When
invoked as an interactive shell with the name `sh', Bash looks for the
variable `ENV', expands its value if it is defined, and uses the
expanded value as the name of a file to read and execute.  Since a
shell invoked as `sh' does not attempt to read and execute commands
from any other startup files, the `--rcfile' option has no effect.  A
non-interactive shell invoked with the name `sh' does not attempt to
read any other startup files.

   When invoked as `sh', Bash enters POSIX mode after the startup files
are read.

Invoked in POSIX mode
.....................

When Bash is started in POSIX mode, as with the `--posix' command line
option, it follows the POSIX standard for startup files.  In this mode,
interactive shells expand the `ENV' variable and commands are read and
executed from the file whose name is the expanded value.  No other
startup files are read.

Invoked by remote shell daemon
..............................

Bash attempts to determine when it is being run by the remote shell
daemon, usually `rshd'.  If Bash determines it is being run by rshd, it
reads and executes commands from `~/.bashrc', if that file exists and
is readable.  It will not do this if invoked as `sh'.  The `--norc'
option may be used to inhibit this behavior, and the `--rcfile' option
may be used to force another file to be read, but `rshd' does not
generally invoke the shell with those options or allow them to be
specified.

Invoked with unequal effective and real UID/GIDs
................................................

If Bash is started with the effective user (group) id not equal to the
real user (group) id, and the `-p' option is not supplied, no startup
files are read, shell functions are not inherited from the environment,
the `SHELLOPTS' variable, if it appears in the environment, is ignored,
and the effective user id is set to the real user id.  If the `-p'
option is supplied at invocation, the startup behavior is the same, but
the effective user id is not reset.


File: bash.info,  Node: Interactive Shells,  Next: Bash Conditional Expressions,  Prev: Bash Startup Files,  Up: Bash Features

6.3 Interactive Shells
======================

* Menu:

* What is an Interactive Shell?::	What determines whether a shell is Interactive.
* Is this Shell Interactive?::	How to tell if a shell is interactive.
* Interactive Shell Behavior::	What changes in a interactive shell?


File: bash.info,  Node: What is an Interactive Shell?,  Next: Is this Shell Interactive?,  Up: Interactive Shells

6.3.1 What is an Interactive Shell?
-----------------------------------

An interactive shell is one started without non-option arguments,
unless `-s' is specified, without specifiying the `-c' option, and
whose input and error output are both connected to terminals (as
determined by `isatty(3)'), or one started with the `-i' option.

   An interactive shell generally reads from and writes to a user's
terminal.

   The `-s' invocation option may be used to set the positional
parameters when an interactive shell is started.


File: bash.info,  Node: Is this Shell Interactive?,  Next: Interactive Shell Behavior,  Prev: What is an Interactive Shell?,  Up: Interactive Shells

6.3.2 Is this Shell Interactive?
--------------------------------

To determine within a startup script whether or not Bash is running
interactively, test the value of the `-' special parameter.  It
contains `i' when the shell is interactive.  For example:

     case "$-" in
     *i*)	echo This shell is interactive ;;
     *)	echo This shell is not interactive ;;
     esac

   Alternatively, startup scripts may examine the variable `PS1'; it is
unset in non-interactive shells, and set in interactive shells.  Thus:

     if [ -z "$PS1" ]; then
             echo This shell is not interactive
     else
             echo This shell is interactive
     fi


File: bash.info,  Node: Interactive Shell Behavior,  Prev: Is this Shell Interactive?,  Up: Interactive Shells

6.3.3 Interactive Shell Behavior
--------------------------------

When the shell is running interactively, it changes its behavior in
several ways.

  1. Startup files are read and executed as described in *note Bash
     Startup Files::.

  2. Job Control (*note Job Control::) is enabled by default.  When job
     control is in effect, Bash ignores the keyboard-generated job
     control signals `SIGTTIN', `SIGTTOU', and `SIGTSTP'.

  3. Bash expands and displays `PS1' before reading the first line of a
     command, and expands and displays `PS2' before reading the second
     and subsequent lines of a multi-line command.

  4. Bash executes the value of the `PROMPT_COMMAND' variable as a
     command before printing the primary prompt, `$PS1' (*note Bash
     Variables::).

  5. Readline (*note Command Line Editing::) is used to read commands
     from the user's terminal.

  6. Bash inspects the value of the `ignoreeof' option to `set -o'
     instead of exiting immediately when it receives an `EOF' on its
     standard input when reading a command (*note The Set Builtin::).

  7. Command history (*note Bash History Facilities::) and history
     expansion (*note History Interaction::) are enabled by default.
     Bash will save the command history to the file named by `$HISTFILE'
     when an interactive shell exits.

  8. Alias expansion (*note Aliases::) is performed by default.

  9. In the absence of any traps, Bash ignores `SIGTERM' (*note
     Signals::).

 10. In the absence of any traps, `SIGINT' is caught and handled
     ((*note Signals::).  `SIGINT' will interrupt some shell builtins.

 11. An interactive login shell sends a `SIGHUP' to all jobs on exit if
     the `hupoxexit' shell option has been enabled (*note Signals::).

 12. The `-n' invocation option is ignored, and `set -n' has no effect
     (*note The Set Builtin::).

 13. Bash will check for mail periodically, depending on the values of
     the `MAIL', `MAILPATH', and `MAILCHECK' shell variables (*note
     Bash Variables::).

 14. Expansion errors due to references to unbound shell variables after
     `set -u' has been enabled will not cause the shell to exit (*note
     The Set Builtin::).

 15. The shell will not exit on expansion errors caused by VAR being
     unset or null in `${VAR:?WORD}' expansions (*note Shell Parameter
     Expansion::).

 16. Redirection errors encountered by shell builtins will not cause the
     shell to exit.

 17. When running in POSIX mode, a special builtin returning an error
     status will not cause the shell to exit (*note Bash POSIX Mode::).

 18. A failed `exec' will not cause the shell to exit (*note Bourne
     Shell Builtins::).

 19. Parser syntax errors will not cause the shell to exit.

 20. Simple spelling correction for directory arguments to the `cd'
     builtin is enabled by default (see the description of the `cdspell'
     option to the `shopt' builtin in *note Bash Builtins::).

 21. The shell will check the value of the `TMOUT' variable and exit if
     a command is not read within the specified number of seconds after
     printing `$PS1' (*note Bash Variables::).



File: bash.info,  Node: Bash Conditional Expressions,  Next: Shell Arithmetic,  Prev: Interactive Shells,  Up: Bash Features

6.4 Bash Conditional Expressions
================================

Conditional expressions are used by the `[[' compound command and the
`test' and `[' builtin commands.

   Expressions may be unary or binary.  Unary expressions are often
used to examine the status of a file.  There are string operators and
numeric comparison operators as well.  If the FILE argument to one of
the primaries is of the form `/dev/fd/N', then file descriptor N is
checked.  If the FILE argument to one of the primaries is one of
`/dev/stdin', `/dev/stdout', or `/dev/stderr', file descriptor 0, 1, or
2, respectively, is checked.

   Unless otherwise specified, primaries that operate on files follow
symbolic links and operate on the target of the link, rather than the
link itself.

`-a FILE'
     True if FILE exists.

`-b FILE'
     True if FILE exists and is a block special file.

`-c FILE'
     True if FILE exists and is a character special file.

`-d FILE'
     True if FILE exists and is a directory.

`-e FILE'
     True if FILE exists.

`-f FILE'
     True if FILE exists and is a regular file.

`-g FILE'
     True if FILE exists and its set-group-id bit is set.

`-h FILE'
     True if FILE exists and is a symbolic link.

`-k FILE'
     True if FILE exists and its "sticky" bit is set.

`-p FILE'
     True if FILE exists and is a named pipe (FIFO).

`-r FILE'
     True if FILE exists and is readable.

`-s FILE'
     True if FILE exists and has a size greater than zero.

`-t FD'
     True if file descriptor FD is open and refers to a terminal.

`-u FILE'
     True if FILE exists and its set-user-id bit is set.

`-w FILE'
     True if FILE exists and is writable.

`-x FILE'
     True if FILE exists and is executable.

`-O FILE'
     True if FILE exists and is owned by the effective user id.

`-G FILE'
     True if FILE exists and is owned by the effective group id.

`-L FILE'
     True if FILE exists and is a symbolic link.

`-S FILE'
     True if FILE exists and is a socket.

`-N FILE'
     True if FILE exists and has been modified since it was last read.

`FILE1 -nt FILE2'
     True if FILE1 is newer (according to modification date) than
     FILE2, or if FILE1 exists and FILE2 does not.

`FILE1 -ot FILE2'
     True if FILE1 is older than FILE2, or if FILE2 exists and FILE1
     does not.

`FILE1 -ef FILE2'
     True if FILE1 and FILE2 refer to the same device and inode numbers.

`-o OPTNAME'
     True if shell option OPTNAME is enabled.  The list of options
     appears in the description of the `-o' option to the `set' builtin
     (*note The Set Builtin::).

`-z STRING'
     True if the length of STRING is zero.

`-n STRING'
`STRING'
     True if the length of STRING is non-zero.

`STRING1 == STRING2'
     True if the strings are equal.  `=' may be used in place of `=='
     for strict POSIX compliance.

`STRING1 != STRING2'
     True if the strings are not equal.

`STRING1 < STRING2'
     True if STRING1 sorts before STRING2 lexicographically in the
     current locale.

`STRING1 > STRING2'
     True if STRING1 sorts after STRING2 lexicographically in the
     current locale.

`ARG1 OP ARG2'
     `OP' is one of `-eq', `-ne', `-lt', `-le', `-gt', or `-ge'.  These
     arithmetic binary operators return true if ARG1 is equal to, not
     equal to, less than, less than or equal to, greater than, or
     greater than or equal to ARG2, respectively.  ARG1 and ARG2 may be
     positive or negative integers.



File: bash.info,  Node: Shell Arithmetic,  Next: Aliases,  Prev: Bash Conditional Expressions,  Up: Bash Features

6.5 Shell Arithmetic
====================

The shell allows arithmetic expressions to be evaluated, as one of the
shell expansions or by the `let' and the `-i' option to the `declare'
builtins.

   Evaluation is done in fixed-width integers with no check for
overflow, though division by 0 is trapped and flagged as an error.  The
operators and their precedence, associativity, and values are the same
as in the C language.  The following list of operators is grouped into
levels of equal-precedence operators.  The levels are listed in order
of decreasing precedence.

`ID++ ID--'
     variable post-increment and post-decrement

`++ID --ID'
     variable pre-increment and pre-decrement

`- +'
     unary minus and plus

`! ~'
     logical and bitwise negation

`**'
     exponentiation

`* / %'
     multiplication, division, remainder

`+ -'
     addition, subtraction

`<< >>'
     left and right bitwise shifts

`<= >= < >'
     comparison

`== !='
     equality and inequality

`&'
     bitwise AND

`^'
     bitwise exclusive OR

`|'
     bitwise OR

`&&'
     logical AND

`||'
     logical OR

`expr ? expr : expr'
     conditional operator

`= *= /= %= += -= <<= >>= &= ^= |='
     assignment

`expr1 , expr2'
     comma

   Shell variables are allowed as operands; parameter expansion is
performed before the expression is evaluated.  Within an expression,
shell variables may also be referenced by name without using the
parameter expansion syntax.  A shell variable that is null or unset
evaluates to 0 when referenced by name without using the parameter
expansion syntax.  The value of a variable is evaluated as an
arithmetic expression when it is referenced, or when a variable which
has been given the INTEGER attribute using `declare -i' is assigned a
value.  A null value evaluates to 0.  A shell variable need not have
its integer attribute turned on to be used in an expression.

   Constants with a leading 0 are interpreted as octal numbers.  A
leading `0x' or `0X' denotes hexadecimal.  Otherwise, numbers take the
form [BASE`#']N, where BASE is a decimal number between 2 and 64
representing the arithmetic base, and N is a number in that base.  If
BASE`#' is omitted, then base 10 is used.  The digits greater than 9
are represented by the lowercase letters, the uppercase letters, `@',
and `_', in that order.  If BASE is less than or equal to 36, lowercase
and uppercase letters may be used interchangeably to represent numbers
between 10 and 35.

   Operators are evaluated in order of precedence.  Sub-expressions in
parentheses are evaluated first and may override the precedence rules
above.


File: bash.info,  Node: Aliases,  Next: Arrays,  Prev: Shell Arithmetic,  Up: Bash Features

6.6 Aliases
===========

ALIASES allow a string to be substituted for a word when it is used as
the first word of a simple command.  The shell maintains a list of
aliases that may be set and unset with the `alias' and `unalias'
builtin commands.

   The first word of each simple command, if unquoted, is checked to see
if it has an alias.  If so, that word is replaced by the text of the
alias.  The characters `/', `$', ``', `=' and any of the shell
metacharacters or quoting characters listed above may not appear in an
alias name.  The replacement text may contain any valid shell input,
including shell metacharacters.  The first word of the replacement text
is tested for aliases, but a word that is identical to an alias being
expanded is not expanded a second time.  This means that one may alias
`ls' to `"ls -F"', for instance, and Bash does not try to recursively
expand the replacement text. If the last character of the alias value
is a space or tab character, then the next command word following the
alias is also checked for alias expansion.

   Aliases are created and listed with the `alias' command, and removed
with the `unalias' command.

   There is no mechanism for using arguments in the replacement text,
as in `csh'.  If arguments are needed, a shell function should be used
(*note Shell Functions::).

   Aliases are not expanded when the shell is not interactive, unless
the `expand_aliases' shell option is set using `shopt' (*note Bash
Builtins::).

   The rules concerning the definition and use of aliases are somewhat
confusing.  Bash always reads at least one complete line of input
before executing any of the commands on that line.  Aliases are
expanded when a command is read, not when it is executed.  Therefore, an
alias definition appearing on the same line as another command does not
take effect until the next line of input is read.  The commands
following the alias definition on that line are not affected by the new
alias.  This behavior is also an issue when functions are executed.
Aliases are expanded when a function definition is read, not when the
function is executed, because a function definition is itself a
compound command.  As a consequence, aliases defined in a function are
not available until after that function is executed.  To be safe,
always put alias definitions on a separate line, and do not use `alias'
in compound commands.

   For almost every purpose, shell functions are preferred over aliases.


File: bash.info,  Node: Arrays,  Next: The Directory Stack,  Prev: Aliases,  Up: Bash Features

6.7 Arrays
==========

Bash provides one-dimensional array variables.  Any variable may be
used as an array; the `declare' builtin will explicitly declare an
array.  There is no maximum limit on the size of an array, nor any
requirement that members be indexed or assigned contiguously.  Arrays
are zero-based.

   An array is created automatically if any variable is assigned to
using the syntax
     name[SUBSCRIPT]=VALUE

The SUBSCRIPT is treated as an arithmetic expression that must evaluate
to a number greater than or equal to zero.  To explicitly declare an
array, use
     declare -a NAME
   The syntax
     declare -a NAME[SUBSCRIPT]
   is also accepted; the SUBSCRIPT is ignored.  Attributes may be
specified for an array variable using the `declare' and `readonly'
builtins.  Each attribute applies to all members of an array.

   Arrays are assigned to using compound assignments of the form
     name=(value1 ... valueN)
   where each VALUE is of the form `[[SUBSCRIPT]=]'STRING.  If the
optional subscript is supplied, that index is assigned to; otherwise
the index of the element assigned is the last index assigned to by the
statement plus one.  Indexing starts at zero.  This syntax is also
accepted by the `declare' builtin.  Individual array elements may be
assigned to using the `name['SUBSCRIPT`]='VALUE syntax introduced above.

   Any element of an array may be referenced using
`${name['SUBSCRIPT`]}'.  The braces are required to avoid conflicts
with the shell's filename expansion operators.  If the SUBSCRIPT is `@'
or `*', the word expands to all members of the array NAME.  These
subscripts differ only when the word appears within double quotes.  If
the word is double-quoted, `${name[*]}' expands to a single word with
the value of each array member separated by the first character of the
`IFS' variable, and `${name[@]}' expands each element of NAME to a
separate word.  When there are no array members, `${name[@]}' expands
to nothing.  If the double-quoted expansion occurs within a word, the
expansion of the first parameter is joined with the beginning part of
the original word, and the expansion of the last parameter is joined
with the last part of the original word.  This is analogous to the
expansion of the special parameters `@' and `*'.
`${#name['SUBSCRIPT`]}' expands to the length of `${name['SUBSCRIPT`]}'.
If SUBSCRIPT is `@' or `*', the expansion is the number of elements in
the array.  Referencing an array variable without a subscript is
equivalent to referencing element zero.

   The `unset' builtin is used to destroy arrays.  `unset'
NAME[SUBSCRIPT] destroys the array element at index SUBSCRIPT.  Care
must be taken to avoid unwanted side effects caused by filename
generation.  `unset' NAME, where NAME is an array, removes the entire
array. A subscript of `*' or `@' also removes the entire array.

   The `declare', `local', and `readonly' builtins each accept a `-a'
option to specify an array.  The `read' builtin accepts a `-a' option
to assign a list of words read from the standard input to an array, and
can read values from the standard input into individual array elements.
The `set' and `declare' builtins display array values in a way that
allows them to be reused as input.


File: bash.info,  Node: The Directory Stack,  Next: Printing a Prompt,  Prev: Arrays,  Up: Bash Features

6.8 The Directory Stack
=======================

* Menu:

* Directory Stack Builtins::		Bash builtin commands to manipulate
					the directory stack.

   The directory stack is a list of recently-visited directories.  The
`pushd' builtin adds directories to the stack as it changes the current
directory, and the `popd' builtin removes specified directories from
the stack and changes the current directory to the directory removed.
The `dirs' builtin displays the contents of the directory stack.

   The contents of the directory stack are also visible as the value of
the `DIRSTACK' shell variable.


File: bash.info,  Node: Directory Stack Builtins,  Up: The Directory Stack

6.8.1 Directory Stack Builtins
------------------------------

`dirs'
          dirs [+N | -N] [-clpv]
     Display the list of currently remembered directories.  Directories
     are added to the list with the `pushd' command; the `popd' command
     removes directories from the list.
    `+N'
          Displays the Nth directory (counting from the left of the
          list printed by `dirs' when invoked without options), starting
          with zero.

    `-N'
          Displays the Nth directory (counting from the right of the
          list printed by `dirs' when invoked without options), starting
          with zero.

    `-c'
          Clears the directory stack by deleting all of the elements.

    `-l'
          Produces a longer listing; the default listing format uses a
          tilde to denote the home directory.

    `-p'
          Causes `dirs' to print the directory stack with one entry per
          line.

    `-v'
          Causes `dirs' to print the directory stack with one entry per
          line, prefixing each entry with its index in the stack.

`popd'
          popd [+N | -N] [-n]

     Remove the top entry from the directory stack, and `cd' to the new
     top directory.  When no arguments are given, `popd' removes the
     top directory from the stack and performs a `cd' to the new top
     directory.  The elements are numbered from 0 starting at the first
     directory listed with `dirs'; i.e., `popd' is equivalent to `popd
     +0'.
    `+N'
          Removes the Nth directory (counting from the left of the list
          printed by `dirs'), starting with zero.

    `-N'
          Removes the Nth directory (counting from the right of the
          list printed by `dirs'), starting with zero.

    `-n'
          Suppresses the normal change of directory when removing
          directories from the stack, so that only the stack is
          manipulated.

`pushd'
          pushd [DIR | +N | -N] [-n]

     Save the current directory on the top of the directory stack and
     then `cd' to DIR.  With no arguments, `pushd' exchanges the top
     two directories.

    `+N'
          Brings the Nth directory (counting from the left of the list
          printed by `dirs', starting with zero) to the top of the list
          by rotating the stack.

    `-N'
          Brings the Nth directory (counting from the right of the list
          printed by `dirs', starting with zero) to the top of the list
          by rotating the stack.

    `-n'
          Suppresses the normal change of directory when adding
          directories to the stack, so that only the stack is
          manipulated.

    `DIR'
          Makes the current working directory be the top of the stack,
          and then executes the equivalent of ``cd' DIR'.  `cd's to DIR.



File: bash.info,  Node: Printing a Prompt,  Next: The Restricted Shell,  Prev: The Directory Stack,  Up: Bash Features

6.9 Controlling the Prompt
==========================

The value of the variable `PROMPT_COMMAND' is examined just before Bash
prints each primary prompt.  If `PROMPT_COMMAND' is set and has a
non-null value, then the value is executed just as if it had been typed
on the command line.

   In addition, the following table describes the special characters
which can appear in the prompt variables:

`\a'
     A bell character.

`\d'
     The date, in "Weekday Month Date" format (e.g., "Tue May 26").

`\D{FORMAT}'
     The FORMAT is passed to `strftime'(3) and the result is inserted
     into the prompt string; an empty FORMAT results in a
     locale-specific time representation.  The braces are required.

`\e'
     An escape character.

`\h'
     The hostname, up to the first `.'.

`\H'
     The hostname.

`\j'
     The number of jobs currently managed by the shell.

`\l'
     The basename of the shell's terminal device name.

`\n'
     A newline.

`\r'
     A carriage return.

`\s'
     The name of the shell, the basename of `$0' (the portion following
     the final slash).

`\t'
     The time, in 24-hour HH:MM:SS format.

`\T'
     The time, in 12-hour HH:MM:SS format.

`\@'
     The time, in 12-hour am/pm format.

`\A'
     The time, in 24-hour HH:MM format.

`\u'
     The username of the current user.

`\v'
     The version of Bash (e.g., 2.00)

`\V'
     The release of Bash, version + patchlevel (e.g., 2.00.0)

`\w'
     The current working directory, with `$HOME' abbreviated with a
     tilde.

`\W'
     The basename of `$PWD', with `$HOME' abbreviated with a tilde.

`\!'
     The history number of this command.

`\#'
     The command number of this command.

`\$'
     If the effective uid is 0, `#', otherwise `$'.

`\NNN'
     The character whose ASCII code is the octal value NNN.

`\\'
     A backslash.

`\['
     Begin a sequence of non-printing characters.  This could be used to
     embed a terminal control sequence into the prompt.

`\]'
     End a sequence of non-printing characters.

   The command number and the history number are usually different: the
history number of a command is its position in the history list, which
may include commands restored from the history file (*note Bash History
Facilities::), while the command number is the position in the sequence
of commands executed during the current shell session.

   After the string is decoded, it is expanded via parameter expansion,
command substitution, arithmetic expansion, and quote removal, subject
to the value of the `promptvars' shell option (*note Bash Builtins::).


File: bash.info,  Node: The Restricted Shell,  Next: Bash POSIX Mode,  Prev: Printing a Prompt,  Up: Bash Features

6.10 The Restricted Shell
=========================

If Bash is started with the name `rbash', or the `--restricted' or `-r'
option is supplied at invocation, the shell becomes restricted.  A
restricted shell is used to set up an environment more controlled than
the standard shell.  A restricted shell behaves identically to `bash'
with the exception that the following are disallowed or not performed:

   * Changing directories with the `cd' builtin.

   * Setting or unsetting the values of the `SHELL', `PATH', `ENV', or
     `BASH_ENV' variables.

   * Specifying command names containing slashes.

   * Specifying a filename containing a slash as an argument to the `.'
     builtin command.

   * Specifying a filename containing a slash as an argument to the `-p'
     option to the `hash' builtin command.

   * Importing function definitions from the shell environment at
     startup.

   * Parsing the value of `SHELLOPTS' from the shell environment at
     startup.

   * Redirecting output using the `>', `>|', `<>', `>&', `&>', and `>>'
     redirection operators.

   * Using the `exec' builtin to replace the shell with another command.

   * Adding or deleting builtin commands with the `-f' and `-d' options
     to the `enable' builtin.

   * Using the `enable' builtin command to enable disabled shell
     builtins.

   * Specifying the `-p' option to the `command' builtin.

   * Turning off restricted mode with `set +r' or `set +o restricted'.

   These restrictions are enforced after any startup files are read.

   When a command that is found to be a shell script is executed (*note
Shell Scripts::), `rbash' turns off any restrictions in the shell
spawned to execute the script.


File: bash.info,  Node: Bash POSIX Mode,  Prev: The Restricted Shell,  Up: Bash Features

6.11 Bash POSIX Mode
====================

Starting Bash with the `--posix' command-line option or executing `set
-o posix' while Bash is running will cause Bash to conform more closely
to the POSIX standard by changing the behavior to match that specified
by POSIX in areas where the Bash default differs.

   When invoked as `sh', Bash enters POSIX mode after reading the
startup files.

   The following list is what's changed when `POSIX mode' is in effect:

  1. When a command in the hash table no longer exists, Bash will
     re-search `$PATH' to find the new location.  This is also
     available with `shopt -s checkhash'.

  2. The message printed by the job control code and builtins when a job
     exits with a non-zero status is `Done(status)'.

  3. The message printed by the job control code and builtins when a job
     is stopped is `Stopped(SIGNAME)', where SIGNAME is, for example,
     `SIGTSTP'.

  4. The `bg' builtin uses the required format to describe each job
     placed in the background, which does not include an indication of
     whether the job is the current or previous job.

  5. Reserved words appearing in a context where reserved words are
     recognized do not undergo alias expansion.

  6. The POSIX `PS1' and `PS2' expansions of `!' to the history number
     and `!!' to `!' are enabled, and parameter expansion is performed
     on the values of `PS1' and `PS2' regardless of the setting of the
     `promptvars' option.

  7. The POSIX startup files are executed (`$ENV') rather than the
     normal Bash files.

  8. Tilde expansion is only performed on assignments preceding a
     command name, rather than on all assignment statements on the line.

  9. The default history file is `~/.sh_history' (this is the default
     value of `$HISTFILE').

 10. The output of `kill -l' prints all the signal names on a single
     line, separated by spaces, without the `SIG' prefix.

 11. The `kill' builtin does not accept signal names with a `SIG'
     prefix.

 12. Non-interactive shells exit if FILENAME in `.' FILENAME is not
     found.

 13. Non-interactive shells exit if a syntax error in an arithmetic
     expansion results in an invalid expression.

 14. Redirection operators do not perform filename expansion on the word
     in the redirection unless the shell is interactive.

 15. Redirection operators do not perform word splitting on the word in
     the redirection.

 16. Function names must be valid shell `name's.  That is, they may not
     contain characters other than letters, digits, and underscores, and
     may not start with a digit.  Declaring a function with an invalid
     name causes a fatal syntax error in non-interactive shells.

 17. POSIX special builtins are found before shell functions during
     command lookup.

 18. If a POSIX special builtin returns an error status, a
     non-interactive shell exits.  The fatal errors are those listed in
     the POSIX standard, and include things like passing incorrect
     options, redirection errors, variable assignment errors for
     assignments preceding the command name, and so on.

 19. If `CDPATH' is set, the `cd' builtin will not implicitly append
     the current directory to it.  This means that `cd' will fail if no
     valid directory name can be constructed from any of the entries in
     `$CDPATH', even if the a directory with the same name as the name
     given as an argument to `cd' exists in the current directory.

 20. A non-interactive shell exits with an error status if a variable
     assignment error occurs when no command name follows the assignment
     statements.  A variable assignment error occurs, for example, when
     trying to assign a value to a readonly variable.

 21. A non-interactive shell exits with an error status if the iteration
     variable in a `for' statement or the selection variable in a
     `select' statement is a readonly variable.

 22. Process substitution is not available.

 23. Assignment statements preceding POSIX special builtins persist in
     the shell environment after the builtin completes.

 24. Assignment statements preceding shell function calls persist in the
     shell environment after the function returns, as if a POSIX
     special builtin command had been executed.

 25. The `export' and `readonly' builtin commands display their output
     in the format required by POSIX.

 26. The `trap' builtin displays signal names without the leading `SIG'.

 27. The `trap' builtin doesn't check the first argument for a possible
     signal specification and revert the signal handling to the original
     disposition if it is, unless that argument consists solely of
     digits and is a valid signal number.  If users want to reset the
     handler for a given signal to the original disposition, they
     should use `-' as the first argument.

 28. The `.' and `source' builtins do not search the current directory
     for the filename argument if it is not found by searching `PATH'.

 29. Subshells spawned to execute command substitutions inherit the
     value of the `-e' option from the parent shell.  When not in POSIX
     mode, Bash clears the `-e' option in such subshells.

 30. Alias expansion is always enabled, even in non-interactive shells.

 31. When the `alias' builtin displays alias definitions, it does not
     display them with a leading `alias ' unless the `-p' option is
     supplied.

 32. When the `set' builtin is invoked without options, it does not
     display shell function names and definitions.

 33. When the `set' builtin is invoked without options, it displays
     variable values without quotes, unless they contain shell
     metacharacters, even if the result contains nonprinting characters.

 34. When the `cd' builtin is invoked in LOGICAL mode, and the pathname
     constructed from `$PWD' and the directory name supplied as an
     argument does not refer to an existing directory, `cd' will fail
     instead of falling back to PHYSICAL mode.

 35. When the `pwd' builtin is supplied the `-P' option, it resets
     `$PWD' to a pathname containing no symlinks.

 36. The `pwd' builtin verifies that the value it prints is the same as
     the current directory, even if it is not asked to check the file
     system with the `-P' option.

 37. When listing the history, the `fc' builtin does not include an
     indication of whether or not a history entry has been modified.

 38. The default editor used by `fc' is `ed'.

 39. The `type' and `command' builtins will not report a non-executable
     file as having been found, though the shell will attempt to
     execute such a file if it is the only so-named file found in
     `$PATH'.

 40. The `vi' editing mode will invoke the `vi' editor directly when
     the `v' command is run, instead of checking `$FCEDIT' and
     `$EDITOR'.

 41. When the `xpg_echo' option is enabled, Bash does not attempt to
     interpret any arguments to `echo' as options.  Each argument is
     displayed, after escape characters are converted.


   There is other POSIX behavior that Bash does not implement by
default even when in POSIX mode.  Specifically:

  1. The `fc' builtin checks `$EDITOR' as a program to edit history
     entries if `FCEDIT' is unset, rather than defaulting directly to
     `ed'.  `fc' uses `ed' if `EDITOR' is unset.

  2. As noted above, Bash requires the `xpg_echo' option to be enabled
     for the `echo' builtin to be fully conformant.


   Bash can be configured to be POSIX-conformant by default, by
specifying the `--enable-strict-posix-default' to `configure' when
building (*note Optional Features::).


File: bash.info,  Node: Job Control,  Next: Using History Interactively,  Prev: Bash Features,  Up: Top

7 Job Control
*************

This chapter discusses what job control is, how it works, and how Bash
allows you to access its facilities.

* Menu:

* Job Control Basics::		How job control works.
* Job Control Builtins::	Bash builtin commands used to interact
				with job control.
* Job Control Variables::	Variables Bash uses to customize job
				control.


File: bash.info,  Node: Job Control Basics,  Next: Job Control Builtins,  Up: Job Control

7.1 Job Control Basics
======================

Job control refers to the ability to selectively stop (suspend) the
execution of processes and continue (resume) their execution at a later
point.  A user typically employs this facility via an interactive
interface supplied jointly by the system's terminal driver and Bash.

   The shell associates a JOB with each pipeline.  It keeps a table of
currently executing jobs, which may be listed with the `jobs' command.
When Bash starts a job asynchronously, it prints a line that looks like:
     [1] 25647
   indicating that this job is job number 1 and that the process ID of
the last process in the pipeline associated with this job is 25647.
All of the processes in a single pipeline are members of the same job.
Bash uses the JOB abstraction as the basis for job control.

   To facilitate the implementation of the user interface to job
control, the operating system maintains the notion of a current terminal
process group ID.  Members of this process group (processes whose
process group ID is equal to the current terminal process group ID)
receive keyboard-generated signals such as `SIGINT'.  These processes
are said to be in the foreground.  Background processes are those whose
process group ID differs from the terminal's; such processes are immune
to keyboard-generated signals.  Only foreground processes are allowed
to read from or write to the terminal.  Background processes which
attempt to read from (write to) the terminal are sent a `SIGTTIN'
(`SIGTTOU') signal by the terminal driver, which, unless caught,
suspends the process.

   If the operating system on which Bash is running supports job
control, Bash contains facilities to use it.  Typing the SUSPEND
character (typically `^Z', Control-Z) while a process is running causes
that process to be stopped and returns control to Bash.  Typing the
DELAYED SUSPEND character (typically `^Y', Control-Y) causes the
process to be stopped when it attempts to read input from the terminal,
and control to be returned to Bash.  The user then manipulates the
state of this job, using the `bg' command to continue it in the
background, the `fg' command to continue it in the foreground, or the
`kill' command to kill it.  A `^Z' takes effect immediately, and has
the additional side effect of causing pending output and typeahead to
be discarded.

   There are a number of ways to refer to a job in the shell.  The
character `%' introduces a job name.

   Job number `n' may be referred to as `%n'.  The symbols `%%' and
`%+' refer to the shell's notion of the current job, which is the last
job stopped while it was in the foreground or started in the background.
A single `%' (with no accompanying job specification) also refers to
the current job.  The previous job may be referenced using `%-'.  In
output pertaining to jobs (e.g., the output of the `jobs' command), the
current job is always flagged with a `+', and the previous job with a
`-'.

   A job may also be referred to using a prefix of the name used to
start it, or using a substring that appears in its command line.  For
example, `%ce' refers to a stopped `ce' job. Using `%?ce', on the other
hand, refers to any job containing the string `ce' in its command line.
If the prefix or substring matches more than one job, Bash reports an
error.

   Simply naming a job can be used to bring it into the foreground:
`%1' is a synonym for `fg %1', bringing job 1 from the background into
the foreground.  Similarly, `%1 &' resumes job 1 in the background,
equivalent to `bg %1'

   The shell learns immediately whenever a job changes state.
Normally, Bash waits until it is about to print a prompt before
reporting changes in a job's status so as to not interrupt any other
output.  If the `-b' option to the `set' builtin is enabled, Bash
reports such changes immediately (*note The Set Builtin::).  Any trap
on `SIGCHLD' is executed for each child process that exits.

   If an attempt to exit Bash is made while jobs are stopped, the shell
prints a message warning that there are stopped jobs.  The `jobs'
command may then be used to inspect their status.  If a second attempt
to exit is made without an intervening command, Bash does not print
another warning, and the stopped jobs are terminated.


File: bash.info,  Node: Job Control Builtins,  Next: Job Control Variables,  Prev: Job Control Basics,  Up: Job Control

7.2 Job Control Builtins
========================

`bg'
          bg [JOBSPEC ...]
     Resume each suspended job JOBSPEC in the background, as if it had
     been started with `&'.  If JOBSPEC is not supplied, the current
     job is used.  The return status is zero unless it is run when job
     control is not enabled, or, when run with job control enabled, any
     JOBSPEC was not found or specifies a job that was started without
     job control.

`fg'
          fg [JOBSPEC]
     Resume the job JOBSPEC in the foreground and make it the current
     job.  If JOBSPEC is not supplied, the current job is used.  The
     return status is that of the command placed into the foreground,
     or non-zero if run when job control is disabled or, when run with
     job control enabled, JOBSPEC does not specify a valid job or
     JOBSPEC specifies a job that was started without job control.

`jobs'
          jobs [-lnprs] [JOBSPEC]
          jobs -x COMMAND [ARGUMENTS]

     The first form lists the active jobs.  The options have the
     following meanings:

    `-l'
          List process IDs in addition to the normal information.

    `-n'
          Display information only about jobs that have changed status
          since the user was last notified of their status.

    `-p'
          List only the process ID of the job's process group leader.

    `-r'
          Restrict output to running jobs.

    `-s'
          Restrict output to stopped jobs.

     If JOBSPEC is given, output is restricted to information about
     that job.  If JOBSPEC is not supplied, the status of all jobs is
     listed.

     If the `-x' option is supplied, `jobs' replaces any JOBSPEC found
     in COMMAND or ARGUMENTS with the corresponding process group ID,
     and executes COMMAND, passing it ARGUMENTs, returning its exit
     status.

`kill'
          kill [-s SIGSPEC] [-n SIGNUM] [-SIGSPEC] JOBSPEC or PID
          kill -l [EXIT_STATUS]
     Send a signal specified by SIGSPEC or SIGNUM to the process named
     by job specification JOBSPEC or process ID PID.  SIGSPEC is either
     a case-insensitive signal name such as `SIGINT' (with or without
     the `SIG' prefix) or a signal number; SIGNUM is a signal number.
     If SIGSPEC and SIGNUM are not present, `SIGTERM' is used.  The
     `-l' option lists the signal names.  If any arguments are supplied
     when `-l' is given, the names of the signals corresponding to the
     arguments are listed, and the return status is zero.  EXIT_STATUS
     is a number specifying a signal number or the exit status of a
     process terminated by a signal.  The return status is zero if at
     least one signal was successfully sent, or non-zero if an error
     occurs or an invalid option is encountered.

`wait'
          wait [JOBSPEC or PID ...]
     Wait until the child process specified by each process ID PID or
     job specification JOBSPEC exits and return the exit status of the
     last command waited for.  If a job spec is given, all processes in
     the job are waited for.  If no arguments are given, all currently
     active child processes are waited for, and the return status is
     zero.  If neither JOBSPEC nor PID specifies an active child process
     of the shell, the return status is 127.

`disown'
          disown [-ar] [-h] [JOBSPEC ...]
     Without options, each JOBSPEC is removed from the table of active
     jobs.  If the `-h' option is given, the job is not removed from
     the table, but is marked so that `SIGHUP' is not sent to the job
     if the shell receives a `SIGHUP'.  If JOBSPEC is not present, and
     neither the `-a' nor `-r' option is supplied, the current job is
     used.  If no JOBSPEC is supplied, the `-a' option means to remove
     or mark all jobs; the `-r' option without a JOBSPEC argument
     restricts operation to running jobs.

`suspend'
          suspend [-f]
     Suspend the execution of this shell until it receives a `SIGCONT'
     signal.  The `-f' option means to suspend even if the shell is a
     login shell.


   When job control is not active, the `kill' and `wait' builtins do
not accept JOBSPEC arguments.  They must be supplied process IDs.


File: bash.info,  Node: Job Control Variables,  Prev: Job Control Builtins,  Up: Job Control

7.3 Job Control Variables
=========================

`auto_resume'
     This variable controls how the shell interacts with the user and
     job control.  If this variable exists then single word simple
     commands without redirections are treated as candidates for
     resumption of an existing job.  There is no ambiguity allowed; if
     there is more than one job beginning with the string typed, then
     the most recently accessed job will be selected.  The name of a
     stopped job, in this context, is the command line used to start
     it.  If this variable is set to the value `exact', the string
     supplied must match the name of a stopped job exactly; if set to
     `substring', the string supplied needs to match a substring of the
     name of a stopped job.  The `substring' value provides
     functionality analogous to the `%?' job ID (*note Job Control
     Basics::).  If set to any other value, the supplied string must be
     a prefix of a stopped job's name; this provides functionality
     analogous to the `%' job ID.



File: bash.info,  Node: Command Line Editing,  Next: Installing Bash,  Prev: Using History Interactively,  Up: Top

8 Command Line Editing
**********************

This chapter describes the basic features of the GNU command line
editing interface.  Command line editing is provided by the Readline
library, which is used by several different programs, including Bash.

* Menu:

* Introduction and Notation::	Notation used in this text.
* Readline Interaction::	The minimum set of commands for editing a line.
* Readline Init File::		Customizing Readline from a user's view.
* Bindable Readline Commands::	A description of most of the Readline commands
				available for binding
* Readline vi Mode::		A short description of how to make Readline
				behave like the vi editor.

* Programmable Completion::	How to specify the possible completions for
				a specific command.
* Programmable Completion Builtins::	Builtin commands to specify how to
				complete arguments for a particular command.


File: bash.info,  Node: Introduction and Notation,  Next: Readline Interaction,  Up: Command Line Editing

8.1 Introduction to Line Editing
================================

The following paragraphs describe the notation used to represent
keystrokes.

   The text `C-k' is read as `Control-K' and describes the character
produced when the <k> key is pressed while the Control key is depressed.

   The text `M-k' is read as `Meta-K' and describes the character
produced when the Meta key (if you have one) is depressed, and the <k>
key is pressed.  The Meta key is labeled <ALT> on many keyboards.  On
keyboards with two keys labeled <ALT> (usually to either side of the
space bar), the <ALT> on the left side is generally set to work as a
Meta key.  The <ALT> key on the right may also be configured to work as
a Meta key or may be configured as some other modifier, such as a
Compose key for typing accented characters.

   If you do not have a Meta or <ALT> key, or another key working as a
Meta key, the identical keystroke can be generated by typing <ESC>
_first_, and then typing <k>.  Either process is known as "metafying"
the <k> key.

   The text `M-C-k' is read as `Meta-Control-k' and describes the
character produced by "metafying" `C-k'.

   In addition, several keys have their own names.  Specifically,
<DEL>, <ESC>, <LFD>, <SPC>, <RET>, and <TAB> all stand for themselves
when seen in this text, or in an init file (*note Readline Init File::).
If your keyboard lacks a <LFD> key, typing <C-j> will produce the
desired character.  The <RET> key may be labeled <Return> or <Enter> on
some keyboards.


File: bash.info,  Node: Readline Interaction,  Next: Readline Init File,  Prev: Introduction and Notation,  Up: Command Line Editing

8.2 Readline Interaction
========================

Often during an interactive session you type in a long line of text,
only to notice that the first word on the line is misspelled.  The
Readline library gives you a set of commands for manipulating the text
as you type it in, allowing you to just fix your typo, and not forcing
you to retype the majority of the line.  Using these editing commands,
you move the cursor to the place that needs correction, and delete or
insert the text of the corrections.  Then, when you are satisfied with
the line, you simply press <RET>.  You do not have to be at the end of
the line to press <RET>; the entire line is accepted regardless of the
location of the cursor within the line.

* Menu:

* Readline Bare Essentials::	The least you need to know about Readline.
* Readline Movement Commands::	Moving about the input line.
* Readline Killing Commands::	How to delete text, and how to get it back!
* Readline Arguments::		Giving numeric arguments to commands.
* Searching::			Searching through previous lines.


File: bash.info,  Node: Readline Bare Essentials,  Next: Readline Movement Commands,  Up: Readline Interaction

8.2.1 Readline Bare Essentials
------------------------------

In order to enter characters into the line, simply type them.  The typed
character appears where the cursor was, and then the cursor moves one
space to the right.  If you mistype a character, you can use your erase
character to back up and delete the mistyped character.

   Sometimes you may mistype a character, and not notice the error
until you have typed several other characters.  In that case, you can
type `C-b' to move the cursor to the left, and then correct your
mistake.  Afterwards, you can move the cursor to the right with `C-f'.

   When you add text in the middle of a line, you will notice that
characters to the right of the cursor are `pushed over' to make room
for the text that you have inserted.  Likewise, when you delete text
behind the cursor, characters to the right of the cursor are `pulled
back' to fill in the blank space created by the removal of the text.  A
list of the bare essentials for editing the text of an input line
follows.

`C-b'
     Move back one character.

`C-f'
     Move forward one character.

<DEL> or <Backspace>
     Delete the character to the left of the cursor.

`C-d'
     Delete the character underneath the cursor.

Printing characters
     Insert the character into the line at the cursor.

`C-_' or `C-x C-u'
     Undo the last editing command.  You can undo all the way back to an
     empty line.

(Depending on your configuration, the <Backspace> key be set to delete
the character to the left of the cursor and the <DEL> key set to delete
the character underneath the cursor, like `C-d', rather than the
character to the left of the cursor.)


File: bash.info,  Node: Readline Movement Commands,  Next: Readline Killing Commands,  Prev: Readline Bare Essentials,  Up: Readline Interaction

8.2.2 Readline Movement Commands
--------------------------------

The above table describes the most basic keystrokes that you need in
order to do editing of the input line.  For your convenience, many
other commands have been added in addition to `C-b', `C-f', `C-d', and
<DEL>.  Here are some commands for moving more rapidly about the line.

`C-a'
     Move to the start of the line.

`C-e'
     Move to the end of the line.

`M-f'
     Move forward a word, where a word is composed of letters and
     digits.

`M-b'
     Move backward a word.

`C-l'
     Clear the screen, reprinting the current line at the top.

   Notice how `C-f' moves forward a character, while `M-f' moves
forward a word.  It is a loose convention that control keystrokes
operate on characters while meta keystrokes operate on words.


File: bash.info,  Node: Readline Killing Commands,  Next: Readline Arguments,  Prev: Readline Movement Commands,  Up: Readline Interaction

8.2.3 Readline Killing Commands
-------------------------------

"Killing" text means to delete the text from the line, but to save it
away for later use, usually by "yanking" (re-inserting) it back into
the line.  (`Cut' and `paste' are more recent jargon for `kill' and
`yank'.)

   If the description for a command says that it `kills' text, then you
can be sure that you can get the text back in a different (or the same)
place later.

   When you use a kill command, the text is saved in a "kill-ring".
Any number of consecutive kills save all of the killed text together, so
that when you yank it back, you get it all.  The kill ring is not line
specific; the text that you killed on a previously typed line is
available to be yanked back later, when you are typing another line.  

   Here is the list of commands for killing text.

`C-k'
     Kill the text from the current cursor position to the end of the
     line.

`M-d'
     Kill from the cursor to the end of the current word, or, if between
     words, to the end of the next word.  Word boundaries are the same
     as those used by `M-f'.

`M-<DEL>'
     Kill from the cursor the start of the current word, or, if between
     words, to the start of the previous word.  Word boundaries are the
     same as those used by `M-b'.

`C-w'
     Kill from the cursor to the previous whitespace.  This is
     different than `M-<DEL>' because the word boundaries differ.


   Here is how to "yank" the text back into the line.  Yanking means to
copy the most-recently-killed text from the kill buffer.

`C-y'
     Yank the most recently killed text back into the buffer at the
     cursor.

`M-y'
     Rotate the kill-ring, and yank the new top.  You can only do this
     if the prior command is `C-y' or `M-y'.


File: bash.info,  Node: Readline Arguments,  Next: Searching,  Prev: Readline Killing Commands,  Up: Readline Interaction

8.2.4 Readline Arguments
------------------------

You can pass numeric arguments to Readline commands.  Sometimes the
argument acts as a repeat count, other times it is the sign of the
argument that is significant.  If you pass a negative argument to a
command which normally acts in a forward direction, that command will
act in a backward direction.  For example, to kill text back to the
start of the line, you might type `M-- C-k'.

   The general way to pass numeric arguments to a command is to type
meta digits before the command.  If the first `digit' typed is a minus
sign (`-'), then the sign of the argument will be negative.  Once you
have typed one meta digit to get the argument started, you can type the
remainder of the digits, and then the command.  For example, to give
the `C-d' command an argument of 10, you could type `M-1 0 C-d', which
will delete the next ten characters on the input line.


File: bash.info,  Node: Searching,  Prev: Readline Arguments,  Up: Readline Interaction

8.2.5 Searching for Commands in the History
-------------------------------------------

Readline provides commands for searching through the command history
(*note Bash History Facilities::) for lines containing a specified
string.  There are two search modes:  "incremental" and
"non-incremental".

   Incremental searches begin before the user has finished typing the
search string.  As each character of the search string is typed,
Readline displays the next entry from the history matching the string
typed so far.  An incremental search requires only as many characters
as needed to find the desired history entry.  To search backward in the
history for a particular string, type `C-r'.  Typing `C-s' searches
forward through the history.  The characters present in the value of
the `isearch-terminators' variable are used to terminate an incremental
search.  If that variable has not been assigned a value, the <ESC> and
`C-J' characters will terminate an incremental search.  `C-g' will
abort an incremental search and restore the original line.  When the
search is terminated, the history entry containing the search string
becomes the current line.

   To find other matching entries in the history list, type `C-r' or
`C-s' as appropriate.  This will search backward or forward in the
history for the next entry matching the search string typed so far.
Any other key sequence bound to a Readline command will terminate the
search and execute that command.  For instance, a <RET> will terminate
the search and accept the line, thereby executing the command from the
history list.  A movement command will terminate the search, make the
last line found the current line, and begin editing.

   Readline remembers the last incremental search string.  If two
`C-r's are typed without any intervening characters defining a new
search string, any remembered search string is used.

   Non-incremental searches read the entire search string before
starting to search for matching history lines.  The search string may be
typed by the user or be part of the contents of the current line.


File: bash.info,  Node: Readline Init File,  Next: Bindable Readline Commands,  Prev: Readline Interaction,  Up: Command Line Editing

8.3 Readline Init File
======================

Although the Readline library comes with a set of Emacs-like
keybindings installed by default, it is possible to use a different set
of keybindings.  Any user can customize programs that use Readline by
putting commands in an "inputrc" file, conventionally in his home
directory.  The name of this file is taken from the value of the shell
variable `INPUTRC'.  If that variable is unset, the default is
`~/.inputrc'.  If that file does not exist or cannot be read, the
ultimate default is `/etc/inputrc'.

   When a program which uses the Readline library starts up, the init
file is read, and the key bindings are set.

   In addition, the `C-x C-r' command re-reads this init file, thus
incorporating any changes that you might have made to it.

* Menu:

* Readline Init File Syntax::	Syntax for the commands in the inputrc file.

* Conditional Init Constructs::	Conditional key bindings in the inputrc file.

* Sample Init File::		An example inputrc file.


File: bash.info,  Node: Readline Init File Syntax,  Next: Conditional Init Constructs,  Up: Readline Init File

8.3.1 Readline Init File Syntax
-------------------------------

There are only a few basic constructs allowed in the Readline init
file.  Blank lines are ignored.  Lines beginning with a `#' are
comments.  Lines beginning with a `$' indicate conditional constructs
(*note Conditional Init Constructs::).  Other lines denote variable
settings and key bindings.

Variable Settings
     You can modify the run-time behavior of Readline by altering the
     values of variables in Readline using the `set' command within the
     init file.  The syntax is simple:

          set VARIABLE VALUE

     Here, for example, is how to change from the default Emacs-like
     key binding to use `vi' line editing commands:

          set editing-mode vi

     Variable names and values, where appropriate, are recognized
     without regard to case.  Unrecognized variable names are ignored.

     Boolean variables (those that can be set to on or off) are set to
     on if the value is null or empty, ON (case-insensitive), or 1.
     Any other value results in the variable being set to off.

     The `bind -V' command lists the current Readline variable names
     and values.  *Note Bash Builtins::.

     A great deal of run-time behavior is changeable with the following
     variables.

    `bell-style'
          Controls what happens when Readline wants to ring the
          terminal bell.  If set to `none', Readline never rings the
          bell.  If set to `visible', Readline uses a visible bell if
          one is available.  If set to `audible' (the default),
          Readline attempts to ring the terminal's bell.

    `bind-tty-special-chars'
          If set to `on', Readline attempts to bind the control
          characters treated specially by the kernel's terminal driver
          to their Readline equivalents.

    `comment-begin'
          The string to insert at the beginning of the line when the
          `insert-comment' command is executed.  The default value is
          `"#"'.

    `completion-ignore-case'
          If set to `on', Readline performs filename matching and
          completion in a case-insensitive fashion.  The default value
          is `off'.

    `completion-query-items'
          The number of possible completions that determines when the
          user is asked whether the list of possibilities should be
          displayed.  If the number of possible completions is greater
          than this value, Readline will ask the user whether or not he
          wishes to view them; otherwise, they are simply listed.  This
          variable must be set to an integer value greater than or
          equal to 0.  A negative value means Readline should never ask.
          The default limit is `100'.

    `convert-meta'
          If set to `on', Readline will convert characters with the
          eighth bit set to an ASCII key sequence by stripping the
          eighth bit and prefixing an <ESC> character, converting them
          to a meta-prefixed key sequence.  The default value is `on'.

    `disable-completion'
          If set to `On', Readline will inhibit word completion.
          Completion  characters will be inserted into the line as if
          they had been mapped to `self-insert'.  The default is `off'.

    `editing-mode'
          The `editing-mode' variable controls which default set of key
          bindings is used.  By default, Readline starts up in Emacs
          editing mode, where the keystrokes are most similar to Emacs.
          This variable can be set to either `emacs' or `vi'.

    `enable-keypad'
          When set to `on', Readline will try to enable the application
          keypad when it is called.  Some systems need this to enable
          the arrow keys.  The default is `off'.

    `expand-tilde'
          If set to `on', tilde expansion is performed when Readline
          attempts word completion.  The default is `off'.

    `history-preserve-point'
          If set to `on', the history code attempts to place point at
          the same location on each history line retrieved with
          `previous-history' or `next-history'.  The default is `off'.

    `horizontal-scroll-mode'
          This variable can be set to either `on' or `off'.  Setting it
          to `on' means that the text of the lines being edited will
          scroll horizontally on a single screen line when they are
          longer than the width of the screen, instead of wrapping onto
          a new screen line.  By default, this variable is set to `off'.

    `input-meta'
          If set to `on', Readline will enable eight-bit input (it will
          not clear the eighth bit in the characters it reads),
          regardless of what the terminal claims it can support.  The
          default value is `off'.  The name `meta-flag' is a synonym
          for this variable.

    `isearch-terminators'
          The string of characters that should terminate an incremental
          search without subsequently executing the character as a
          command (*note Searching::).  If this variable has not been
          given a value, the characters <ESC> and `C-J' will terminate
          an incremental search.

    `keymap'
          Sets Readline's idea of the current keymap for key binding
          commands.  Acceptable `keymap' names are `emacs',
          `emacs-standard', `emacs-meta', `emacs-ctlx', `vi', `vi-move',
          `vi-command', and `vi-insert'.  `vi' is equivalent to
          `vi-command'; `emacs' is equivalent to `emacs-standard'.  The
          default value is `emacs'.  The value of the `editing-mode'
          variable also affects the default keymap.

    `mark-directories'
          If set to `on', completed directory names have a slash
          appended.  The default is `on'.

    `mark-modified-lines'
          This variable, when set to `on', causes Readline to display an
          asterisk (`*') at the start of history lines which have been
          modified.  This variable is `off' by default.

    `mark-symlinked-directories'
          If set to `on', completed names which are symbolic links to
          directories have a slash appended (subject to the value of
          `mark-directories').  The default is `off'.

    `match-hidden-files'
          This variable, when set to `on', causes Readline to match
          files whose names begin with a `.' (hidden files) when
          performing filename completion, unless the leading `.' is
          supplied by the user in the filename to be completed.  This
          variable is `on' by default.

    `output-meta'
          If set to `on', Readline will display characters with the
          eighth bit set directly rather than as a meta-prefixed escape
          sequence.  The default is `off'.

    `page-completions'
          If set to `on', Readline uses an internal `more'-like pager
          to display a screenful of possible completions at a time.
          This variable is `on' by default.

    `print-completions-horizontally'
          If set to `on', Readline will display completions with matches
          sorted horizontally in alphabetical order, rather than down
          the screen.  The default is `off'.

    `show-all-if-ambiguous'
          This alters the default behavior of the completion functions.
          If set to `on', words which have more than one possible
          completion cause the matches to be listed immediately instead
          of ringing the bell.  The default value is `off'.

    `show-all-if-unmodified'
          This alters the default behavior of the completion functions
          in a fashion similar to SHOW-ALL-IF-AMBIGUOUS.  If set to
          `on', words which have more than one possible completion
          without any possible partial completion (the possible
          completions don't share a common prefix) cause the matches to
          be listed immediately instead of ringing the bell.  The
          default value is `off'.

    `visible-stats'
          If set to `on', a character denoting a file's type is
          appended to the filename when listing possible completions.
          The default is `off'.


Key Bindings
     The syntax for controlling key bindings in the init file is
     simple.  First you need to find the name of the command that you
     want to change.  The following sections contain tables of the
     command name, the default keybinding, if any, and a short
     description of what the command does.

     Once you know the name of the command, simply place on a line in
     the init file the name of the key you wish to bind the command to,
     a colon, and then the name of the command.  There can be no space
     between the key name and the colon - that will be interpreted as
     part of the key name.  The name of the key can be expressed in
     different ways, depending on what you find most comfortable.

     In addition to command names, readline allows keys to be bound to
     a string that is inserted when the key is pressed (a MACRO).

     The `bind -p' command displays Readline function names and
     bindings in a format that can put directly into an initialization
     file.  *Note Bash Builtins::.

    KEYNAME: FUNCTION-NAME or MACRO
          KEYNAME is the name of a key spelled out in English.  For
          example:
               Control-u: universal-argument
               Meta-Rubout: backward-kill-word
               Control-o: "> output"

          In the above example, `C-u' is bound to the function
          `universal-argument', `M-DEL' is bound to the function
          `backward-kill-word', and `C-o' is bound to run the macro
          expressed on the right hand side (that is, to insert the text
          `> output' into the line).

          A number of symbolic character names are recognized while
          processing this key binding syntax: DEL, ESC, ESCAPE, LFD,
          NEWLINE, RET, RETURN, RUBOUT, SPACE, SPC, and TAB.

    "KEYSEQ": FUNCTION-NAME or MACRO
          KEYSEQ differs from KEYNAME above in that strings denoting an
          entire key sequence can be specified, by placing the key
          sequence in double quotes.  Some GNU Emacs style key escapes
          can be used, as in the following example, but the special
          character names are not recognized.

               "\C-u": universal-argument
               "\C-x\C-r": re-read-init-file
               "\e[11~": "Function Key 1"

          In the above example, `C-u' is again bound to the function
          `universal-argument' (just as it was in the first example),
          `C-x C-r' is bound to the function `re-read-init-file', and
          `<ESC> <[> <1> <1> <~>' is bound to insert the text `Function
          Key 1'.


     The following GNU Emacs style escape sequences are available when
     specifying key sequences:

    `\C-'
          control prefix

    `\M-'
          meta prefix

    `\e'
          an escape character

    `\\'
          backslash

    `\"'
          <">, a double quotation mark

    `\''
          <'>, a single quote or apostrophe

     In addition to the GNU Emacs style escape sequences, a second set
     of backslash escapes is available:

    `\a'
          alert (bell)

    `\b'
          backspace

    `\d'
          delete

    `\f'
          form feed

    `\n'
          newline

    `\r'
          carriage return

    `\t'
          horizontal tab

    `\v'
          vertical tab

    `\NNN'
          the eight-bit character whose value is the octal value NNN
          (one to three digits)

    `\xHH'
          the eight-bit character whose value is the hexadecimal value
          HH (one or two hex digits)

     When entering the text of a macro, single or double quotes must be
     used to indicate a macro definition.  Unquoted text is assumed to
     be a function name.  In the macro body, the backslash escapes
     described above are expanded.  Backslash will quote any other
     character in the macro text, including `"' and `''.  For example,
     the following binding will make `C-x \' insert a single `\' into
     the line:
          "\C-x\\": "\\"



File: bash.info,  Node: Conditional Init Constructs,  Next: Sample Init File,  Prev: Readline Init File Syntax,  Up: Readline Init File

8.3.2 Conditional Init Constructs
---------------------------------

Readline implements a facility similar in spirit to the conditional
compilation features of the C preprocessor which allows key bindings
and variable settings to be performed as the result of tests.  There
are four parser directives used.

`$if'
     The `$if' construct allows bindings to be made based on the
     editing mode, the terminal being used, or the application using
     Readline.  The text of the test extends to the end of the line; no
     characters are required to isolate it.

    `mode'
          The `mode=' form of the `$if' directive is used to test
          whether Readline is in `emacs' or `vi' mode.  This may be
          used in conjunction with the `set keymap' command, for
          instance, to set bindings in the `emacs-standard' and
          `emacs-ctlx' keymaps only if Readline is starting out in
          `emacs' mode.

    `term'
          The `term=' form may be used to include terminal-specific key
          bindings, perhaps to bind the key sequences output by the
          terminal's function keys.  The word on the right side of the
          `=' is tested against both the full name of the terminal and
          the portion of the terminal name before the first `-'.  This
          allows `sun' to match both `sun' and `sun-cmd', for instance.

    `application'
          The APPLICATION construct is used to include
          application-specific settings.  Each program using the
          Readline library sets the APPLICATION NAME, and you can test
          for a particular value.  This could be used to bind key
          sequences to functions useful for a specific program.  For
          instance, the following command adds a key sequence that
          quotes the current or previous word in Bash:
               $if Bash
               # Quote the current or previous word
               "\C-xq": "\eb\"\ef\""
               $endif

`$endif'
     This command, as seen in the previous example, terminates an `$if'
     command.

`$else'
     Commands in this branch of the `$if' directive are executed if the
     test fails.

`$include'
     This directive takes a single filename as an argument and reads
     commands and bindings from that file.  For example, the following
     directive reads from `/etc/inputrc':
          $include /etc/inputrc


File: bash.info,  Node: Sample Init File,  Prev: Conditional Init Constructs,  Up: Readline Init File

8.3.3 Sample Init File
----------------------

Here is an example of an INPUTRC file.  This illustrates key binding,
variable assignment, and conditional syntax.


     # This file controls the behaviour of line input editing for
     # programs that use the GNU Readline library.  Existing
     # programs include FTP, Bash, and GDB.
     #
     # You can re-read the inputrc file with C-x C-r.
     # Lines beginning with '#' are comments.
     #
     # First, include any systemwide bindings and variable
     # assignments from /etc/Inputrc
     $include /etc/Inputrc

     #
     # Set various bindings for emacs mode.

     set editing-mode emacs

     $if mode=emacs

     Meta-Control-h:	backward-kill-word	Text after the function name is ignored

     #
     # Arrow keys in keypad mode
     #
     #"\M-OD":        backward-char
     #"\M-OC":        forward-char
     #"\M-OA":        previous-history
     #"\M-OB":        next-history
     #
     # Arrow keys in ANSI mode
     #
     "\M-[D":        backward-char
     "\M-[C":        forward-char
     "\M-[A":        previous-history
     "\M-[B":        next-history
     #
     # Arrow keys in 8 bit keypad mode
     #
     #"\M-\C-OD":       backward-char
     #"\M-\C-OC":       forward-char
     #"\M-\C-OA":       previous-history
     #"\M-\C-OB":       next-history
     #
     # Arrow keys in 8 bit ANSI mode
     #
     #"\M-\C-[D":       backward-char
     #"\M-\C-[C":       forward-char
     #"\M-\C-[A":       previous-history
     #"\M-\C-[B":       next-history

     C-q: quoted-insert

     $endif

     # An old-style binding.  This happens to be the default.
     TAB: complete

     # Macros that are convenient for shell interaction
     $if Bash
     # edit the path
     "\C-xp": "PATH=${PATH}\e\C-e\C-a\ef\C-f"
     # prepare to type a quoted word --
     # insert open and close double quotes
     # and move to just after the open quote
     "\C-x\"": "\"\"\C-b"
     # insert a backslash (testing backslash escapes
     # in sequences and macros)
     "\C-x\\": "\\"
     # Quote the current or previous word
     "\C-xq": "\eb\"\ef\""
     # Add a binding to refresh the line, which is unbound
     "\C-xr": redraw-current-line
     # Edit variable on current line.
     "\M-\C-v": "\C-a\C-k$\C-y\M-\C-e\C-a\C-y="
     $endif

     # use a visible bell if one is available
     set bell-style visible

     # don't strip characters to 7 bits when reading
     set input-meta on

     # allow iso-latin1 characters to be inserted rather
     # than converted to prefix-meta sequences
     set convert-meta off

     # display characters with the eighth bit set directly
     # rather than as meta-prefixed characters
     set output-meta on

     # if there are more than 150 possible completions for
     # a word, ask the user if he wants to see all of them
     set completion-query-items 150

     # For FTP
     $if Ftp
     "\C-xg": "get \M-?"
     "\C-xt": "put \M-?"
     "\M-.": yank-last-arg
     $endif


File: bash.info,  Node: Bindable Readline Commands,  Next: Readline vi Mode,  Prev: Readline Init File,  Up: Command Line Editing

8.4 Bindable Readline Commands
==============================

* Menu:

* Commands For Moving::		Moving about the line.
* Commands For History::	Getting at previous lines.
* Commands For Text::		Commands for changing text.
* Commands For Killing::	Commands for killing and yanking.
* Numeric Arguments::		Specifying numeric arguments, repeat counts.
* Commands For Completion::	Getting Readline to do the typing for you.
* Keyboard Macros::		Saving and re-executing typed characters
* Miscellaneous Commands::	Other miscellaneous commands.

   This section describes Readline commands that may be bound to key
sequences.  You can list your key bindings by executing `bind -P' or,
for a more terse format, suitable for an INPUTRC file, `bind -p'.
(*Note Bash Builtins::.)  Command names without an accompanying key
sequence are unbound by default.

   In the following descriptions, "point" refers to the current cursor
position, and "mark" refers to a cursor position saved by the
`set-mark' command.  The text between the point and mark is referred to
as the "region".


File: bash.info,  Node: Commands For Moving,  Next: Commands For History,  Up: Bindable Readline Commands

8.4.1 Commands For Moving
-------------------------

`beginning-of-line (C-a)'
     Move to the start of the current line.

`end-of-line (C-e)'
     Move to the end of the line.

`forward-char (C-f)'
     Move forward a character.

`backward-char (C-b)'
     Move back a character.

`forward-word (M-f)'
     Move forward to the end of the next word.  Words are composed of
     letters and digits.

`backward-word (M-b)'
     Move back to the start of the current or previous word.  Words are
     composed of letters and digits.

`clear-screen (C-l)'
     Clear the screen and redraw the current line, leaving the current
     line at the top of the screen.

`redraw-current-line ()'
     Refresh the current line.  By default, this is unbound.



File: bash.info,  Node: Commands For History,  Next: Commands For Text,  Prev: Commands For Moving,  Up: Bindable Readline Commands

8.4.2 Commands For Manipulating The History
-------------------------------------------

`accept-line (Newline or Return)'
     Accept the line regardless of where the cursor is.  If this line is
     non-empty, add it to the history list according to the setting of
     the `HISTCONTROL' and `HISTIGNORE' variables.  If this line is a
     modified history line, then restore the history line to its
     original state.

`previous-history (C-p)'
     Move `back' through the history list, fetching the previous
     command.

`next-history (C-n)'
     Move `forward' through the history list, fetching the next command.

`beginning-of-history (M-<)'
     Move to the first line in the history.

`end-of-history (M->)'
     Move to the end of the input history, i.e., the line currently
     being entered.

`reverse-search-history (C-r)'
     Search backward starting at the current line and moving `up'
     through the history as necessary.  This is an incremental search.

`forward-search-history (C-s)'
     Search forward starting at the current line and moving `down'
     through the the history as necessary.  This is an incremental
     search.

`non-incremental-reverse-search-history (M-p)'
     Search backward starting at the current line and moving `up'
     through the history as necessary using a non-incremental search
     for a string supplied by the user.

`non-incremental-forward-search-history (M-n)'
     Search forward starting at the current line and moving `down'
     through the the history as necessary using a non-incremental search
     for a string supplied by the user.

`history-search-forward ()'
     Search forward through the history for the string of characters
     between the start of the current line and the point.  This is a
     non-incremental search.  By default, this command is unbound.

`history-search-backward ()'
     Search backward through the history for the string of characters
     between the start of the current line and the point.  This is a
     non-incremental search.  By default, this command is unbound.

`yank-nth-arg (M-C-y)'
     Insert the first argument to the previous command (usually the
     second word on the previous line) at point.  With an argument N,
     insert the Nth word from the previous command (the words in the
     previous command begin with word 0).  A negative argument inserts
     the Nth word from the end of the previous command.  Once the
     argument N is computed, the argument is extracted as if the `!N'
     history expansion had been specified.

`yank-last-arg (M-. or M-_)'
     Insert last argument to the previous command (the last word of the
     previous history entry).  With an argument, behave exactly like
     `yank-nth-arg'.  Successive calls to `yank-last-arg' move back
     through the history list, inserting the last argument of each line
     in turn.  The history expansion facilities are used to extract the
     last argument, as if the `!$' history expansion had been specified.



File: bash.info,  Node: Commands For Text,  Next: Commands For Killing,  Prev: Commands For History,  Up: Bindable Readline Commands

8.4.3 Commands For Changing Text
--------------------------------

`delete-char (C-d)'
     Delete the character at point.  If point is at the beginning of
     the line, there are no characters in the line, and the last
     character typed was not bound to `delete-char', then return EOF.

`backward-delete-char (Rubout)'
     Delete the character behind the cursor.  A numeric argument means
     to kill the characters instead of deleting them.

`forward-backward-delete-char ()'
     Delete the character under the cursor, unless the cursor is at the
     end of the line, in which case the character behind the cursor is
     deleted.  By default, this is not bound to a key.

`quoted-insert (C-q or C-v)'
     Add the next character typed to the line verbatim.  This is how to
     insert key sequences like `C-q', for example.

`self-insert (a, b, A, 1, !, ...)'
     Insert yourself.

`transpose-chars (C-t)'
     Drag the character before the cursor forward over the character at
     the cursor, moving the cursor forward as well.  If the insertion
     point is at the end of the line, then this transposes the last two
     characters of the line.  Negative arguments have no effect.

`transpose-words (M-t)'
     Drag the word before point past the word after point, moving point
     past that word as well.  If the insertion point is at the end of
     the line, this transposes the last two words on the line.

`upcase-word (M-u)'
     Uppercase the current (or following) word.  With a negative
     argument, uppercase the previous word, but do not move the cursor.

`downcase-word (M-l)'
     Lowercase the current (or following) word.  With a negative
     argument, lowercase the previous word, but do not move the cursor.

`capitalize-word (M-c)'
     Capitalize the current (or following) word.  With a negative
     argument, capitalize the previous word, but do not move the cursor.

`overwrite-mode ()'
     Toggle overwrite mode.  With an explicit positive numeric argument,
     switches to overwrite mode.  With an explicit non-positive numeric
     argument, switches to insert mode.  This command affects only
     `emacs' mode; `vi' mode does overwrite differently.  Each call to
     `readline()' starts in insert mode.

     In overwrite mode, characters bound to `self-insert' replace the
     text at point rather than pushing the text to the right.
     Characters bound to `backward-delete-char' replace the character
     before point with a space.

     By default, this command is unbound.



File: bash.info,  Node: Commands For Killing,  Next: Numeric Arguments,  Prev: Commands For Text,  Up: Bindable Readline Commands

8.4.4 Killing And Yanking
-------------------------

`kill-line (C-k)'
     Kill the text from point to the end of the line.

`backward-kill-line (C-x Rubout)'
     Kill backward to the beginning of the line.

`unix-line-discard (C-u)'
     Kill backward from the cursor to the beginning of the current line.

`kill-whole-line ()'
     Kill all characters on the current line, no matter where point is.
     By default, this is unbound.

`kill-word (M-d)'
     Kill from point to the end of the current word, or if between
     words, to the end of the next word.  Word boundaries are the same
     as `forward-word'.

`backward-kill-word (M-<DEL>)'
     Kill the word behind point.  Word boundaries are the same as
     `backward-word'.

`unix-word-rubout (C-w)'
     Kill the word behind point, using white space as a word boundary.
     The killed text is saved on the kill-ring.

`unix-filename-rubout ()'
     Kill the word behind point, using white space and the slash
     character as the word boundaries.  The killed text is saved on the
     kill-ring.

`delete-horizontal-space ()'
     Delete all spaces and tabs around point.  By default, this is
     unbound.

`kill-region ()'
     Kill the text in the current region.  By default, this command is
     unbound.

`copy-region-as-kill ()'
     Copy the text in the region to the kill buffer, so it can be yanked
     right away.  By default, this command is unbound.

`copy-backward-word ()'
     Copy the word before point to the kill buffer.  The word
     boundaries are the same as `backward-word'.  By default, this
     command is unbound.

`copy-forward-word ()'
     Copy the word following point to the kill buffer.  The word
     boundaries are the same as `forward-word'.  By default, this
     command is unbound.

`yank (C-y)'
     Yank the top of the kill ring into the buffer at point.

`yank-pop (M-y)'
     Rotate the kill-ring, and yank the new top.  You can only do this
     if the prior command is `yank' or `yank-pop'.


File: bash.info,  Node: Numeric Arguments,  Next: Commands For Completion,  Prev: Commands For Killing,  Up: Bindable Readline Commands

8.4.5 Specifying Numeric Arguments
----------------------------------

`digit-argument (M-0, M-1, ... M--)'
     Add this digit to the argument already accumulating, or start a new
     argument.  `M--' starts a negative argument.

`universal-argument ()'
     This is another way to specify an argument.  If this command is
     followed by one or more digits, optionally with a leading minus
     sign, those digits define the argument.  If the command is
     followed by digits, executing `universal-argument' again ends the
     numeric argument, but is otherwise ignored.  As a special case, if
     this command is immediately followed by a character that is
     neither a digit or minus sign, the argument count for the next
     command is multiplied by four.  The argument count is initially
     one, so executing this function the first time makes the argument
     count four, a second time makes the argument count sixteen, and so
     on.  By default, this is not bound to a key.


File: bash.info,  Node: Commands For Completion,  Next: Keyboard Macros,  Prev: Numeric Arguments,  Up: Bindable Readline Commands

8.4.6 Letting Readline Type For You
-----------------------------------

`complete (<TAB>)'
     Attempt to perform completion on the text before point.  The
     actual completion performed is application-specific.  Bash
     attempts completion treating the text as a variable (if the text
     begins with `$'), username (if the text begins with `~'), hostname
     (if the text begins with `@'), or command (including aliases and
     functions) in turn.  If none of these produces a match, filename
     completion is attempted.

`possible-completions (M-?)'
     List the possible completions of the text before point.

`insert-completions (M-*)'
     Insert all completions of the text before point that would have
     been generated by `possible-completions'.

`menu-complete ()'
     Similar to `complete', but replaces the word to be completed with
     a single match from the list of possible completions.  Repeated
     execution of `menu-complete' steps through the list of possible
     completions, inserting each match in turn.  At the end of the list
     of completions, the bell is rung (subject to the setting of
     `bell-style') and the original text is restored.  An argument of N
     moves N positions forward in the list of matches; a negative
     argument may be used to move backward through the list.  This
     command is intended to be bound to <TAB>, but is unbound by
     default.

`delete-char-or-list ()'
     Deletes the character under the cursor if not at the beginning or
     end of the line (like `delete-char').  If at the end of the line,
     behaves identically to `possible-completions'.  This command is
     unbound by default.

`complete-filename (M-/)'
     Attempt filename completion on the text before point.

`possible-filename-completions (C-x /)'
     List the possible completions of the text before point, treating
     it as a filename.

`complete-username (M-~)'
     Attempt completion on the text before point, treating it as a
     username.

`possible-username-completions (C-x ~)'
     List the possible completions of the text before point, treating
     it as a username.

`complete-variable (M-$)'
     Attempt completion on the text before point, treating it as a
     shell variable.

`possible-variable-completions (C-x $)'
     List the possible completions of the text before point, treating
     it as a shell variable.

`complete-hostname (M-@)'
     Attempt completion on the text before point, treating it as a
     hostname.

`possible-hostname-completions (C-x @)'
     List the possible completions of the text before point, treating
     it as a hostname.

`complete-command (M-!)'
     Attempt completion on the text before point, treating it as a
     command name.  Command completion attempts to match the text
     against aliases, reserved words, shell functions, shell builtins,
     and finally executable filenames, in that order.

`possible-command-completions (C-x !)'
     List the possible completions of the text before point, treating
     it as a command name.

`dynamic-complete-history (M-<TAB>)'
     Attempt completion on the text before point, comparing the text
     against lines from the history list for possible completion
     matches.

`complete-into-braces (M-{)'
     Perform filename completion and insert the list of possible
     completions enclosed within braces so the list is available to the
     shell (*note Brace Expansion::).



File: bash.info,  Node: Keyboard Macros,  Next: Miscellaneous Commands,  Prev: Commands For Completion,  Up: Bindable Readline Commands

8.4.7 Keyboard Macros
---------------------

`start-kbd-macro (C-x ()'
     Begin saving the characters typed into the current keyboard macro.

`end-kbd-macro (C-x ))'
     Stop saving the characters typed into the current keyboard macro
     and save the definition.

`call-last-kbd-macro (C-x e)'
     Re-execute the last keyboard macro defined, by making the
     characters in the macro appear as if typed at the keyboard.



File: bash.info,  Node: Miscellaneous Commands,  Prev: Keyboard Macros,  Up: Bindable Readline Commands

8.4.8 Some Miscellaneous Commands
---------------------------------

`re-read-init-file (C-x C-r)'
     Read in the contents of the INPUTRC file, and incorporate any
     bindings or variable assignments found there.

`abort (C-g)'
     Abort the current editing command and ring the terminal's bell
     (subject to the setting of `bell-style').

`do-uppercase-version (M-a, M-b, M-X, ...)'
     If the metafied character X is lowercase, run the command that is
     bound to the corresponding uppercase character.

`prefix-meta (<ESC>)'
     Metafy the next character typed.  This is for keyboards without a
     meta key.  Typing `<ESC> f' is equivalent to typing `M-f'.

`undo (C-_ or C-x C-u)'
     Incremental undo, separately remembered for each line.

`revert-line (M-r)'
     Undo all changes made to this line.  This is like executing the
     `undo' command enough times to get back to the beginning.

`tilde-expand (M-&)'
     Perform tilde expansion on the current word.

`set-mark (C-@)'
     Set the mark to the point.  If a numeric argument is supplied, the
     mark is set to that position.

`exchange-point-and-mark (C-x C-x)'
     Swap the point with the mark.  The current cursor position is set
     to the saved position, and the old cursor position is saved as the
     mark.

`character-search (C-])'
     A character is read and point is moved to the next occurrence of
     that character.  A negative count searches for previous
     occurrences.

`character-search-backward (M-C-])'
     A character is read and point is moved to the previous occurrence
     of that character.  A negative count searches for subsequent
     occurrences.

`insert-comment (M-#)'
     Without a numeric argument, the value of the `comment-begin'
     variable is inserted at the beginning of the current line.  If a
     numeric argument is supplied, this command acts as a toggle:  if
     the characters at the beginning of the line do not match the value
     of `comment-begin', the value is inserted, otherwise the
     characters in `comment-begin' are deleted from the beginning of
     the line.  In either case, the line is accepted as if a newline
     had been typed.  The default value of `comment-begin' causes this
     command to make the current line a shell comment.  If a numeric
     argument causes the comment character to be removed, the line will
     be executed by the shell.

`dump-functions ()'
     Print all of the functions and their key bindings to the Readline
     output stream.  If a numeric argument is supplied, the output is
     formatted in such a way that it can be made part of an INPUTRC
     file.  This command is unbound by default.

`dump-variables ()'
     Print all of the settable variables and their values to the
     Readline output stream.  If a numeric argument is supplied, the
     output is formatted in such a way that it can be made part of an
     INPUTRC file.  This command is unbound by default.

`dump-macros ()'
     Print all of the Readline key sequences bound to macros and the
     strings they output.  If a numeric argument is supplied, the
     output is formatted in such a way that it can be made part of an
     INPUTRC file.  This command is unbound by default.

`glob-complete-word (M-g)'
     The word before point is treated as a pattern for pathname
     expansion, with an asterisk implicitly appended.  This pattern is
     used to generate a list of matching file names for possible
     completions.

`glob-expand-word (C-x *)'
     The word before point is treated as a pattern for pathname
     expansion, and the list of matching file names is inserted,
     replacing the word.  If a numeric argument is supplied, a `*' is
     appended before pathname expansion.

`glob-list-expansions (C-x g)'
     The list of expansions that would have been generated by
     `glob-expand-word' is displayed, and the line is redrawn.  If a
     numeric argument is supplied, a `*' is appended before pathname
     expansion.

`display-shell-version (C-x C-v)'
     Display version information about the current instance of Bash.

`shell-expand-line (M-C-e)'
     Expand the line as the shell does.  This performs alias and
     history expansion as well as all of the shell word expansions
     (*note Shell Expansions::).

`history-expand-line (M-^)'
     Perform history expansion on the current line.

`magic-space ()'
     Perform history expansion on the current line and insert a space
     (*note History Interaction::).

`alias-expand-line ()'
     Perform alias expansion on the current line (*note Aliases::).

`history-and-alias-expand-line ()'
     Perform history and alias expansion on the current line.

`insert-last-argument (M-. or M-_)'
     A synonym for `yank-last-arg'.

`operate-and-get-next (C-o)'
     Accept the current line for execution and fetch the next line
     relative to the current line from the history for editing.  Any
     argument is ignored.

`edit-and-execute-command (C-xC-e)'
     Invoke an editor on the current command line, and execute the
     result as shell commands.  Bash attempts to invoke `$VISUAL',
     `$EDITOR', and `emacs' as the editor, in that order.



File: bash.info,  Node: Readline vi Mode,  Next: Programmable Completion,  Prev: Bindable Readline Commands,  Up: Command Line Editing

8.5 Readline vi Mode
====================

While the Readline library does not have a full set of `vi' editing
functions, it does contain enough to allow simple editing of the line.
The Readline `vi' mode behaves as specified in the POSIX 1003.2
standard.

   In order to switch interactively between `emacs' and `vi' editing
modes, use the `set -o emacs' and `set -o vi' commands (*note The Set
Builtin::).  The Readline default is `emacs' mode.

   When you enter a line in `vi' mode, you are already placed in
`insertion' mode, as if you had typed an `i'.  Pressing <ESC> switches
you into `command' mode, where you can edit the text of the line with
the standard `vi' movement keys, move to previous history lines with
`k' and subsequent lines with `j', and so forth.


File: bash.info,  Node: Programmable Completion,  Next: Programmable Completion Builtins,  Prev: Readline vi Mode,  Up: Command Line Editing

8.6 Programmable Completion
===========================

When word completion is attempted for an argument to a command for
which a completion specification (a COMPSPEC) has been defined using
the `complete' builtin (*note Programmable Completion Builtins::), the
programmable completion facilities are invoked.

   First, the command name is identified.  If a compspec has been
defined for that command, the compspec is used to generate the list of
possible completions for the word.  If the command word is a full
pathname, a compspec for the full pathname is searched for first.  If
no compspec is found for the full pathname, an attempt is made to find
a compspec for the portion following the final slash.

   Once a compspec has been found, it is used to generate the list of
matching words.  If a compspec is not found, the default Bash completion
described above (*note Commands For Completion::) is performed.

   First, the actions specified by the compspec are used.  Only matches
which are prefixed by the word being completed are returned.  When the
`-f' or `-d' option is used for filename or directory name completion,
the shell variable `FIGNORE' is used to filter the matches.  *Note Bash
Variables::, for a description of `FIGNORE'.

   Any completions specified by a filename expansion pattern to the
`-G' option are generated next.  The words generated by the pattern
need not match the word being completed.  The `GLOBIGNORE' shell
variable is not used to filter the matches, but the `FIGNORE' shell
variable is used.

   Next, the string specified as the argument to the `-W' option is
considered.  The string is first split using the characters in the `IFS'
special variable as delimiters.  Shell quoting is honored.  Each word
is then expanded using brace expansion, tilde expansion, parameter and
variable expansion, command substitution, and arithmetic expansion, as
described above (*note Shell Expansions::).  The results are split
using the rules described above (*note Word Splitting::).  The results
of the expansion are prefix-matched against the word being completed,
and the matching words become the possible completions.

   After these matches have been generated, any shell function or
command specified with the `-F' and `-C' options is invoked.  When the
command or function is invoked, the `COMP_LINE' and `COMP_POINT'
variables are assigned values as described above (*note Bash
Variables::).  If a shell function is being invoked, the `COMP_WORDS'
and `COMP_CWORD' variables are also set.  When the function or command
is invoked, the first argument is the name of the command whose
arguments are being completed, the second argument is the word being
completed, and the third argument is the word preceding the word being
completed on the current command line.  No filtering of the generated
completions against the word being completed is performed; the function
or command has complete freedom in generating the matches.

   Any function specified with `-F' is invoked first.  The function may
use any of the shell facilities, including the `compgen' builtin
described below (*note Programmable Completion Builtins::), to generate
the matches.  It must put the possible completions in the `COMPREPLY'
array variable.

   Next, any command specified with the `-C' option is invoked in an
environment equivalent to command substitution.  It should print a list
of completions, one per line, to the standard output.  Backslash may be
used to escape a newline, if necessary.

   After all of the possible completions are generated, any filter
specified with the `-X' option is applied to the list.  The filter is a
pattern as used for pathname expansion; a `&' in the pattern is
replaced with the text of the word being completed.  A literal `&' may
be escaped with a backslash; the backslash is removed before attempting
a match.  Any completion that matches the pattern will be removed from
the list.  A leading `!' negates the pattern; in this case any
completion not matching the pattern will be removed.

   Finally, any prefix and suffix specified with the `-P' and `-S'
options are added to each member of the completion list, and the result
is returned to the Readline completion code as the list of possible
completions.

   If the previously-applied actions do not generate any matches, and
the `-o dirnames' option was supplied to `complete' when the compspec
was defined, directory name completion is attempted.

   If the `-o plusdirs' option was supplied to `complete' when the
compspec was defined, directory name completion is attempted and any
matches are added to the results of the other actions.

   By default, if a compspec is found, whatever it generates is
returned to the completion code as the full set of possible completions.
The default Bash completions are not attempted, and the Readline default
of filename completion is disabled.  If the `-o bashdefault' option was
supplied to `complete' when the compspec was defined, the default Bash
completions are attempted if the compspec generates no matches.  If the
`-o default' option was supplied to `complete' when the compspec was
defined, Readline's default completion will be performed if the
compspec (and, if attempted, the default Bash completions) generate no
matches.

   When a compspec indicates that directory name completion is desired,
the programmable completion functions force Readline to append a slash
to completed names which are symbolic links to directories, subject to
the value of the MARK-DIRECTORIES Readline variable, regardless of the
setting of the MARK-SYMLINKED-DIRECTORIES Readline variable.


File: bash.info,  Node: Programmable Completion Builtins,  Prev: Programmable Completion,  Up: Command Line Editing

8.7 Programmable Completion Builtins
====================================

Two builtin commands are available to manipulate the programmable
completion facilities.

`compgen'
          `compgen [OPTION] [WORD]'

     Generate possible completion matches for WORD according to the
     OPTIONs, which may be any option accepted by the `complete'
     builtin with the exception of `-p' and `-r', and write the matches
     to the standard output.  When using the `-F' or `-C' options, the
     various shell variables set by the programmable completion
     facilities, while available, will not have useful values.

     The matches will be generated in the same way as if the
     programmable completion code had generated them directly from a
     completion specification with the same flags.  If WORD is
     specified, only those completions matching WORD will be displayed.

     The return value is true unless an invalid option is supplied, or
     no matches were generated.

`complete'
          `complete [-abcdefgjksuv] [-o COMP-OPTION] [-A ACTION] [-G GLOBPAT] [-W WORDLIST]
          [-P PREFIX] [-S SUFFIX] [-X FILTERPAT] [-F FUNCTION]
          [-C COMMAND] NAME [NAME ...]'
          `complete -pr [NAME ...]'

     Specify how arguments to each NAME should be completed.  If the
     `-p' option is supplied, or if no options are supplied, existing
     completion specifications are printed in a way that allows them to
     be reused as input.  The `-r' option removes a completion
     specification for each NAME, or, if no NAMEs are supplied, all
     completion specifications.

     The process of applying these completion specifications when word
     completion is attempted is described above (*note Programmable
     Completion::).

     Other options, if specified, have the following meanings.  The
     arguments to the `-G', `-W', and `-X' options (and, if necessary,
     the `-P' and `-S' options) should be quoted to protect them from
     expansion before the `complete' builtin is invoked.

    `-o COMP-OPTION'
          The COMP-OPTION controls several aspects of the compspec's
          behavior beyond the simple generation of completions.
          COMP-OPTION may be one of:

         `bashdefault'
               Perform the rest of the default Bash completions if the
               compspec generates no matches.

         `default'
               Use Readline's default filename completion if the
               compspec generates no matches.

         `dirnames'
               Perform directory name completion if the compspec
               generates no matches.

         `filenames'
               Tell Readline that the compspec generates filenames, so
               it can perform any filename-specific processing (like
               adding a slash to directory names or suppressing
               trailing spaces).  This option is intended to be used
               with shell functions specified with `-F'.

         `nospace'
               Tell Readline not to append a space (the default) to
               words completed at the end of the line.

         `plusdirs'
               After any matches defined by the compspec are generated,
               directory name completion is attempted and any matches
               are added to the results of the other actions.


    `-A ACTION'
          The ACTION may be one of the following to generate a list of
          possible completions:

         `alias'
               Alias names.  May also be specified as `-a'.

         `arrayvar'
               Array variable names.

         `binding'
               Readline key binding names (*note Bindable Readline
               Commands::).

         `builtin'
               Names of shell builtin commands.  May also be specified
               as `-b'.

         `command'
               Command names.  May also be specified as `-c'.

         `directory'
               Directory names.  May also be specified as `-d'.

         `disabled'
               Names of disabled shell builtins.

         `enabled'
               Names of enabled shell builtins.

         `export'
               Names of exported shell variables.  May also be
               specified as `-e'.

         `file'
               File names.  May also be specified as `-f'.

         `function'
               Names of shell functions.

         `group'
               Group names.  May also be specified as `-g'.

         `helptopic'
               Help topics as accepted by the `help' builtin (*note
               Bash Builtins::).

         `hostname'
               Hostnames, as taken from the file specified by the
               `HOSTFILE' shell variable (*note Bash Variables::).

         `job'
               Job names, if job control is active.  May also be
               specified as `-j'.

         `keyword'
               Shell reserved words.  May also be specified as `-k'.

         `running'
               Names of running jobs, if job control is active.

         `service'
               Service names.  May also be specified as `-s'.

         `setopt'
               Valid arguments for the `-o' option to the `set' builtin
               (*note The Set Builtin::).

         `shopt'
               Shell option names as accepted by the `shopt' builtin
               (*note Bash Builtins::).

         `signal'
               Signal names.

         `stopped'
               Names of stopped jobs, if job control is active.

         `user'
               User names.  May also be specified as `-u'.

         `variable'
               Names of all shell variables.  May also be specified as
               `-v'.

    `-G GLOBPAT'
          The filename expansion pattern GLOBPAT is expanded to generate
          the possible completions.

    `-W WORDLIST'
          The WORDLIST is split using the characters in the `IFS'
          special variable as delimiters, and each resultant word is
          expanded.  The possible completions are the members of the
          resultant list which match the word being completed.

    `-C COMMAND'
          COMMAND is executed in a subshell environment, and its output
          is used as the possible completions.

    `-F FUNCTION'
          The shell function FUNCTION is executed in the current shell
          environment.  When it finishes, the possible completions are
          retrieved from the value of the `COMPREPLY' array variable.

    `-X FILTERPAT'
          FILTERPAT is a pattern as used for filename expansion.  It is
          applied to the list of possible completions generated by the
          preceding options and arguments, and each completion matching
          FILTERPAT is removed from the list.  A leading `!' in
          FILTERPAT negates the pattern; in this case, any completion
          not matching FILTERPAT is removed.

    `-P PREFIX'
          PREFIX is added at the beginning of each possible completion
          after all other options have been applied.

    `-S SUFFIX'
          SUFFIX is appended to each possible completion after all
          other options have been applied.

     The return value is true unless an invalid option is supplied, an
     option other than `-p' or `-r' is supplied without a NAME
     argument, an attempt is made to remove a completion specification
     for a NAME for which no specification exists, or an error occurs
     adding a completion specification.

   

File: bash.info,  Node: Using History Interactively,  Next: Command Line Editing,  Prev: Job Control,  Up: Top

9 Using History Interactively
*****************************

This chapter describes how to use the GNU History Library
interactively, from a user's standpoint.  It should be considered a
user's guide.  For information on using the GNU History Library in
other programs, see the GNU Readline Library Manual.

* Menu:

* Bash History Facilities::	How Bash lets you manipulate your command
				history.
* Bash History Builtins::	The Bash builtin commands that manipulate
				the command history.
* History Interaction::		What it feels like using History as a user.


File: bash.info,  Node: Bash History Facilities,  Next: Bash History Builtins,  Up: Using History Interactively

9.1 Bash History Facilities
===========================

When the `-o history' option to the `set' builtin is enabled (*note The
Set Builtin::), the shell provides access to the "command history", the
list of commands previously typed.  The value of the `HISTSIZE' shell
variable is used as the number of commands to save in a history list.
The text of the last `$HISTSIZE' commands (default 500) is saved.  The
shell stores each command in the history list prior to parameter and
variable expansion but after history expansion is performed, subject to
the values of the shell variables `HISTIGNORE' and `HISTCONTROL'.

   When the shell starts up, the history is initialized from the file
named by the `HISTFILE' variable (default `~/.bash_history').  The file
named by the value of `HISTFILE' is truncated, if necessary, to contain
no more than the number of lines specified by the value of the
`HISTFILESIZE' variable.  When an interactive shell exits, the last
`$HISTSIZE' lines are copied from the history list to the file named by
`$HISTFILE'.  If the `histappend' shell option is set (*note Bash
Builtins::), the lines are appended to the history file, otherwise the
history file is overwritten.  If `HISTFILE' is unset, or if the history
file is unwritable, the history is not saved.  After saving the
history, the history file is truncated to contain no more than
`$HISTFILESIZE' lines.  If `HISTFILESIZE' is not set, no truncation is
performed.

   If the `HISTTIMEFORMAT' is set, the time stamp information
associated with each history entry is written to the history file.

   The builtin command `fc' may be used to list or edit and re-execute
a portion of the history list.  The `history' builtin may be used to
display or modify the history list and manipulate the history file.
When using command-line editing, search commands are available in each
editing mode that provide access to the history list (*note Commands
For History::).

   The shell allows control over which commands are saved on the history
list.  The `HISTCONTROL' and `HISTIGNORE' variables may be set to cause
the shell to save only a subset of the commands entered.  The `cmdhist'
shell option, if enabled, causes the shell to attempt to save each line
of a multi-line command in the same history entry, adding semicolons
where necessary to preserve syntactic correctness.  The `lithist' shell
option causes the shell to save the command with embedded newlines
instead of semicolons.  The `shopt' builtin is used to set these
options.  *Note Bash Builtins::, for a description of `shopt'.


File: bash.info,  Node: Bash History Builtins,  Next: History Interaction,  Prev: Bash History Facilities,  Up: Using History Interactively

9.2 Bash History Builtins
=========================

Bash provides two builtin commands which manipulate the history list
and history file.

`fc'
          `fc [-e ENAME] [-nlr] [FIRST] [LAST]'
          `fc -s [PAT=REP] [COMMAND]'

     Fix Command.  In the first form, a range of commands from FIRST to
     LAST is selected from the history list.  Both FIRST and LAST may
     be specified as a string (to locate the most recent command
     beginning with that string) or as a number (an index into the
     history list, where a negative number is used as an offset from the
     current command number).  If LAST is not specified it is set to
     FIRST.  If FIRST is not specified it is set to the previous
     command for editing and -16 for listing.  If the `-l' flag is
     given, the commands are listed on standard output.  The `-n' flag
     suppresses the command numbers when listing.  The `-r' flag
     reverses the order of the listing.  Otherwise, the editor given by
     ENAME is invoked on a file containing those commands.  If ENAME is
     not given, the value of the following variable expansion is used:
     `${FCEDIT:-${EDITOR:-vi}}'.  This says to use the value of the
     `FCEDIT' variable if set, or the value of the `EDITOR' variable if
     that is set, or `vi' if neither is set.  When editing is complete,
     the edited commands are echoed and executed.

     In the second form, COMMAND is re-executed after each instance of
     PAT in the selected command is replaced by REP.

     A useful alias to use with the `fc' command is `r='fc -s'', so
     that typing `r cc' runs the last command beginning with `cc' and
     typing `r' re-executes the last command (*note Aliases::).

`history'
          history [N]
          history -c
          history -d OFFSET
          history [-anrw] [FILENAME]
          history -ps ARG

     With no options, display the history list with line numbers.
     Lines prefixed with a `*' have been modified.  An argument of N
     lists only the last N lines.  If the shell variable
     `HISTTIMEFORMAT' is set and not null, it is used as a format
     string for STRFTIME to display the time stamp associated with each
     displayed history entry.  No intervening blank is printed between
     the formatted time stamp and the history line.

     Options, if supplied, have the following meanings:

    `-c'
          Clear the history list.  This may be combined with the other
          options to replace the history list completely.

    `-d OFFSET'
          Delete the history entry at position OFFSET.  OFFSET should
          be specified as it appears when the history is displayed.

    `-a'
          Append the new history lines (history lines entered since the
          beginning of the current Bash session) to the history file.

    `-n'
          Append the history lines not already read from the history
          file to the current history list.  These are lines appended
          to the history file since the beginning of the current Bash
          session.

    `-r'
          Read the current history file and append its contents to the
          history list.

    `-w'
          Write out the current history to the history file.

    `-p'
          Perform history substitution on the ARGs and display the
          result on the standard output, without storing the results in
          the history list.

    `-s'
          The ARGs are added to the end of the history list as a single
          entry.


     When any of the `-w', `-r', `-a', or `-n' options is used, if
     FILENAME is given, then it is used as the history file.  If not,
     then the value of the `HISTFILE' variable is used.



File: bash.info,  Node: History Interaction,  Prev: Bash History Builtins,  Up: Using History Interactively

9.3 History Expansion
=====================

The History library provides a history expansion feature that is similar
to the history expansion provided by `csh'.  This section describes the
syntax used to manipulate the history information.

   History expansions introduce words from the history list into the
input stream, making it easy to repeat commands, insert the arguments
to a previous command into the current input line, or fix errors in
previous commands quickly.

   History expansion takes place in two parts.  The first is to
determine which line from the history list should be used during
substitution.  The second is to select portions of that line for
inclusion into the current one.  The line selected from the history is
called the "event", and the portions of that line that are acted upon
are called "words".  Various "modifiers" are available to manipulate
the selected words.  The line is broken into words in the same fashion
that Bash does, so that several words surrounded by quotes are
considered one word.  History expansions are introduced by the
appearance of the history expansion character, which is `!' by default.
Only `\' and `'' may be used to escape the history expansion character.

   Several shell options settable with the `shopt' builtin (*note Bash
Builtins::) may be used to tailor the behavior of history expansion.
If the `histverify' shell option is enabled, and Readline is being
used, history substitutions are not immediately passed to the shell
parser.  Instead, the expanded line is reloaded into the Readline
editing buffer for further modification.  If Readline is being used,
and the `histreedit' shell option is enabled, a failed history
expansion will be reloaded into the Readline editing buffer for
correction.  The `-p' option to the `history' builtin command may be
used to see what a history expansion will do before using it.  The `-s'
option to the `history' builtin may be used to add commands to the end
of the history list without actually executing them, so that they are
available for subsequent recall.  This is most useful in conjunction
with Readline.

   The shell allows control of the various characters used by the
history expansion mechanism with the `histchars' variable.

* Menu:

* Event Designators::	How to specify which history line to use.
* Word Designators::	Specifying which words are of interest.
* Modifiers::		Modifying the results of substitution.


File: bash.info,  Node: Event Designators,  Next: Word Designators,  Up: History Interaction

9.3.1 Event Designators
-----------------------

An event designator is a reference to a command line entry in the
history list.  

`!'
     Start a history substitution, except when followed by a space, tab,
     the end of the line, `=' or `(' (when the `extglob' shell option
     is enabled using the `shopt' builtin).

`!N'
     Refer to command line N.

`!-N'
     Refer to the command N lines back.

`!!'
     Refer to the previous command.  This is a synonym for `!-1'.

`!STRING'
     Refer to the most recent command starting with STRING.

`!?STRING[?]'
     Refer to the most recent command containing STRING.  The trailing
     `?' may be omitted if the STRING is followed immediately by a
     newline.

`^STRING1^STRING2^'
     Quick Substitution.  Repeat the last command, replacing STRING1
     with STRING2.  Equivalent to `!!:s/STRING1/STRING2/'.

`!#'
     The entire command line typed so far.



File: bash.info,  Node: Word Designators,  Next: Modifiers,  Prev: Event Designators,  Up: History Interaction

9.3.2 Word Designators
----------------------

Word designators are used to select desired words from the event.  A
`:' separates the event specification from the word designator.  It may
be omitted if the word designator begins with a `^', `$', `*', `-', or
`%'.  Words are numbered from the beginning of the line, with the first
word being denoted by 0 (zero).  Words are inserted into the current
line separated by single spaces.

   For example,

`!!'
     designates the preceding command.  When you type this, the
     preceding command is repeated in toto.

`!!:$'
     designates the last argument of the preceding command.  This may be
     shortened to `!$'.

`!fi:2'
     designates the second argument of the most recent command starting
     with the letters `fi'.

   Here are the word designators:

`0 (zero)'
     The `0'th word.  For many applications, this is the command word.

`N'
     The Nth word.

`^'
     The first argument; that is, word 1.

`$'
     The last argument.

`%'
     The word matched by the most recent `?STRING?' search.

`X-Y'
     A range of words; `-Y' abbreviates `0-Y'.

`*'
     All of the words, except the `0'th.  This is a synonym for `1-$'.
     It is not an error to use `*' if there is just one word in the
     event; the empty string is returned in that case.

`X*'
     Abbreviates `X-$'

`X-'
     Abbreviates `X-$' like `X*', but omits the last word.


   If a word designator is supplied without an event specification, the
previous command is used as the event.


File: bash.info,  Node: Modifiers,  Prev: Word Designators,  Up: History Interaction

9.3.3 Modifiers
---------------

After the optional word designator, you can add a sequence of one or
more of the following modifiers, each preceded by a `:'.

`h'
     Remove a trailing pathname component, leaving only the head.

`t'
     Remove all leading  pathname  components, leaving the tail.

`r'
     Remove a trailing suffix of the form `.SUFFIX', leaving the
     basename.

`e'
     Remove all but the trailing suffix.

`p'
     Print the new command but do not execute it.

`q'
     Quote the substituted words, escaping further substitutions.

`x'
     Quote the substituted words as with `q', but break into words at
     spaces, tabs, and newlines.

`s/OLD/NEW/'
     Substitute NEW for the first occurrence of OLD in the event line.
     Any delimiter may be used in place of `/'.  The delimiter may be
     quoted in OLD and NEW with a single backslash.  If `&' appears in
     NEW, it is replaced by OLD.  A single backslash will quote the
     `&'.  The final delimiter is optional if it is the last character
     on the input line.

`&'
     Repeat the previous substitution.

`g'
`a'
     Cause changes to be applied over the entire event line.  Used in
     conjunction with `s', as in `gs/OLD/NEW/', or with `&'.

`G'
     Apply the following `s' modifier once to each word in the event.



File: bash.info,  Node: Installing Bash,  Next: Reporting Bugs,  Prev: Command Line Editing,  Up: Top

10 Installing Bash
******************

This chapter provides basic instructions for installing Bash on the
various supported platforms.  The distribution supports the GNU
operating systems, nearly every version of Unix, and several non-Unix
systems such as BeOS and Interix.  Other independent ports exist for
MS-DOS, OS/2, and Windows platforms.

* Menu:

* Basic Installation::	Installation instructions.
* Compilers and Options::	How to set special options for various
				systems.
* Compiling For Multiple Architectures::	How to compile Bash for more
						than one kind of system from
						the same source tree.
* Installation Names::	How to set the various paths used by the installation.
* Specifying the System Type::	How to configure Bash for a particular system.
* Sharing Defaults::	How to share default configuration values among GNU
			programs.
* Operation Controls::	Options recognized by the configuration program.
* Optional Features::	How to enable and disable optional features when
			building Bash.


File: bash.info,  Node: Basic Installation,  Next: Compilers and Options,  Up: Installing Bash

10.1 Basic Installation
=======================

These are installation instructions for Bash.

   The simplest way to compile Bash is:

  1. `cd' to the directory containing the source code and type
     `./configure' to configure Bash for your system.  If you're using
     `csh' on an old version of System V, you might need to type `sh
     ./configure' instead to prevent `csh' from trying to execute
     `configure' itself.

     Running `configure' takes some time.  While running, it prints
     messages telling which features it is checking for.

  2. Type `make' to compile Bash and build the `bashbug' bug reporting
     script.

  3. Optionally, type `make tests' to run the Bash test suite.

  4. Type `make install' to install `bash' and `bashbug'.  This will
     also install the manual pages and Info file.


   The `configure' shell script attempts to guess correct values for
various system-dependent variables used during compilation.  It uses
those values to create a `Makefile' in each directory of the package
(the top directory, the `builtins', `doc', and `support' directories,
each directory under `lib', and several others).  It also creates a
`config.h' file containing system-dependent definitions.  Finally, it
creates a shell script named `config.status' that you can run in the
future to recreate the current configuration, a file `config.cache'
that saves the results of its tests to speed up reconfiguring, and a
file `config.log' containing compiler output (useful mainly for
debugging `configure').  If at some point `config.cache' contains
results you don't want to keep, you may remove or edit it.

   To find out more about the options and arguments that the
`configure' script understands, type

     bash-2.04$ ./configure --help

at the Bash prompt in your Bash source directory.

   If you need to do unusual things to compile Bash, please try to
figure out how `configure' could check whether or not to do them, and
mail diffs or instructions to <bash-maintainers@gnu.org> so they can be
considered for the next release.

   The file `configure.in' is used to create `configure' by a program
called Autoconf.  You only need `configure.in' if you want to change it
or regenerate `configure' using a newer version of Autoconf.  If you do
this, make sure you are using Autoconf version 2.50 or newer.

   You can remove the program binaries and object files from the source
code directory by typing `make clean'.  To also remove the files that
`configure' created (so you can compile Bash for a different kind of
computer), type `make distclean'.


File: bash.info,  Node: Compilers and Options,  Next: Compiling For Multiple Architectures,  Prev: Basic Installation,  Up: Installing Bash

10.2 Compilers and Options
==========================

Some systems require unusual options for compilation or linking that
the `configure' script does not know about.  You can give `configure'
initial values for variables by setting them in the environment.  Using
a Bourne-compatible shell, you can do that on the command line like
this:

     CC=c89 CFLAGS=-O2 LIBS=-lposix ./configure

   On systems that have the `env' program, you can do it like this:

     env CPPFLAGS=-I/usr/local/include LDFLAGS=-s ./configure

   The configuration process uses GCC to build Bash if it is available.


File: bash.info,  Node: Compiling For Multiple Architectures,  Next: Installation Names,  Prev: Compilers and Options,  Up: Installing Bash

10.3 Compiling For Multiple Architectures
=========================================

You can compile Bash for more than one kind of computer at the same
time, by placing the object files for each architecture in their own
directory.  To do this, you must use a version of `make' that supports
the `VPATH' variable, such as GNU `make'.  `cd' to the directory where
you want the object files and executables to go and run the `configure'
script from the source directory.  You may need to supply the
`--srcdir=PATH' argument to tell `configure' where the source files
are.  `configure' automatically checks for the source code in the
directory that `configure' is in and in `..'.

   If you have to use a `make' that does not supports the `VPATH'
variable, you can compile Bash for one architecture at a time in the
source code directory.  After you have installed Bash for one
architecture, use `make distclean' before reconfiguring for another
architecture.

   Alternatively, if your system supports symbolic links, you can use
the `support/mkclone' script to create a build tree which has symbolic
links back to each file in the source directory.  Here's an example
that creates a build directory in the current directory from a source
directory `/usr/gnu/src/bash-2.0':

     bash /usr/gnu/src/bash-2.0/support/mkclone -s /usr/gnu/src/bash-2.0 .

The `mkclone' script requires Bash, so you must have already built Bash
for at least one architecture before you can create build directories
for other architectures.


File: bash.info,  Node: Installation Names,  Next: Specifying the System Type,  Prev: Compiling For Multiple Architectures,  Up: Installing Bash

10.4 Installation Names
=======================

By default, `make install' will install into `/usr/local/bin',
`/usr/local/man', etc.  You can specify an installation prefix other
than `/usr/local' by giving `configure' the option `--prefix=PATH', or
by specifying a value for the `DESTDIR' `make' variable when running
`make install'.

   You can specify separate installation prefixes for
architecture-specific files and architecture-independent files.  If you
give `configure' the option `--exec-prefix=PATH', `make install' will
use PATH as the prefix for installing programs and libraries.
Documentation and other data files will still use the regular prefix.


File: bash.info,  Node: Specifying the System Type,  Next: Sharing Defaults,  Prev: Installation Names,  Up: Installing Bash

10.5 Specifying the System Type
===============================

There may be some features `configure' can not figure out
automatically, but need to determine by the type of host Bash will run
on.  Usually `configure' can figure that out, but if it prints a
message saying it can not guess the host type, give it the
`--host=TYPE' option.  `TYPE' can either be a short name for the system
type, such as `sun4', or a canonical name with three fields:
`CPU-COMPANY-SYSTEM' (e.g., `i386-unknown-freebsd4.2').

   See the file `support/config.sub' for the possible values of each
field.


File: bash.info,  Node: Sharing Defaults,  Next: Operation Controls,  Prev: Specifying the System Type,  Up: Installing Bash

10.6 Sharing Defaults
=====================

If you want to set default values for `configure' scripts to share, you
can create a site shell script called `config.site' that gives default
values for variables like `CC', `cache_file', and `prefix'.  `configure'
looks for `PREFIX/share/config.site' if it exists, then
`PREFIX/etc/config.site' if it exists.  Or, you can set the
`CONFIG_SITE' environment variable to the location of the site script.
A warning: the Bash `configure' looks for a site script, but not all
`configure' scripts do.


File: bash.info,  Node: Operation Controls,  Next: Optional Features,  Prev: Sharing Defaults,  Up: Installing Bash

10.7 Operation Controls
=======================

`configure' recognizes the following options to control how it operates.

`--cache-file=FILE'
     Use and save the results of the tests in FILE instead of
     `./config.cache'.  Set FILE to `/dev/null' to disable caching, for
     debugging `configure'.

`--help'
     Print a summary of the options to `configure', and exit.

`--quiet'
`--silent'
`-q'
     Do not print messages saying which checks are being made.

`--srcdir=DIR'
     Look for the Bash source code in directory DIR.  Usually
     `configure' can determine that directory automatically.

`--version'
     Print the version of Autoconf used to generate the `configure'
     script, and exit.

   `configure' also accepts some other, not widely used, boilerplate
options.  `configure --help' prints the complete list.


File: bash.info,  Node: Optional Features,  Prev: Operation Controls,  Up: Installing Bash

10.8 Optional Features
======================

The Bash `configure' has a number of `--enable-FEATURE' options, where
FEATURE indicates an optional part of Bash.  There are also several
`--with-PACKAGE' options, where PACKAGE is something like `bash-malloc'
or `purify'.  To turn off the default use of a package, use
`--without-PACKAGE'.  To configure Bash without a feature that is
enabled by default, use `--disable-FEATURE'.

   Here is a complete list of the `--enable-' and `--with-' options
that the Bash `configure' recognizes.

`--with-afs'
     Define if you are using the Andrew File System from Transarc.

`--with-bash-malloc'
     Use the Bash version of `malloc' in the directory `lib/malloc'.
     This is not the same `malloc' that appears in GNU libc, but an
     older version originally derived from the 4.2 BSD `malloc'.  This
     `malloc' is very fast, but wastes some space on each allocation.
     This option is enabled by default.  The `NOTES' file contains a
     list of systems for which this should be turned off, and
     `configure' disables this option automatically for a number of
     systems.

`--with-curses'
     Use the curses library instead of the termcap library.  This should
     be supplied if your system has an inadequate or incomplete termcap
     database.

`--with-gnu-malloc'
     A synonym for `--with-bash-malloc'.

`--with-installed-readline[=PREFIX]'
     Define this to make Bash link with a locally-installed version of
     Readline rather than the version in `lib/readline'.  This works
     only with Readline 5.0 and later versions.  If PREFIX is `yes' or
     not supplied, `configure' uses the values of the make variables
     `includedir' and `libdir', which are subdirectories of `prefix' by
     default, to find the installed version of Readline if it is not in
     the standard system include and library directories.  If PREFIX is
     `no', Bash links with the version in `lib/readline'.  If PREFIX is
     set to any other value, `configure' treats it as a directory
     pathname and looks for the installed version of Readline in
     subdirectories of that directory (include files in
     PREFIX/`include' and the library in PREFIX/`lib').

`--with-purify'
     Define this to use the Purify memory allocation checker from
     Rational Software.

`--enable-minimal-config'
     This produces a shell with minimal features, close to the
     historical Bourne shell.

   There are several `--enable-' options that alter how Bash is
compiled and linked, rather than changing run-time features.

`--enable-largefile'
     Enable support for large files
     (http://www.sas.com/standards/large_file/x_open.20Mar96.html) if
     the operating system requires special compiler options to build
     programs which can access large files.  This is enabled by
     default, if the operating system provides large file support.

`--enable-profiling'
     This builds a Bash binary that produces profiling information to be
     processed by `gprof' each time it is executed.

`--enable-static-link'
     This causes Bash to be linked statically, if `gcc' is being used.
     This could be used to build a version to use as root's shell.

   The `minimal-config' option can be used to disable all of the
following options, but it is processed first, so individual options may
be enabled using `enable-FEATURE'.

   All of the following options except for `disabled-builtins' and
`xpg-echo-default' are enabled by default, unless the operating system
does not provide the necessary support.

`--enable-alias'
     Allow alias expansion and include the `alias' and `unalias'
     builtins (*note Aliases::).

`--enable-arith-for-command'
     Include support for the alternate form of the `for' command that
     behaves like the C language `for' statement (*note Looping
     Constructs::).

`--enable-array-variables'
     Include support for one-dimensional array shell variables (*note
     Arrays::).

`--enable-bang-history'
     Include support for `csh'-like history substitution (*note History
     Interaction::).

`--enable-brace-expansion'
     Include `csh'-like brace expansion ( `b{a,b}c' ==> `bac bbc' ).
     See *note Brace Expansion::, for a complete description.

`--enable-command-timing'
     Include support for recognizing `time' as a reserved word and for
     displaying timing statistics for the pipeline following `time'
     (*note Pipelines::).  This allows pipelines as well as shell
     builtins and functions to be timed.

`--enable-cond-command'
     Include support for the `[[' conditional command.  (*note
     Conditional Constructs::).

`--enable-cond-regexp'
     Include support for matching POSIX regular expressions using the
     `=~' binary operator in the `[[' conditional command.  (*note
     Conditional Constructs::).

`--enable-debugger'
     Include support for the bash debugger (distributed separately).

`--enable-directory-stack'
     Include support for a `csh'-like directory stack and the `pushd',
     `popd', and `dirs' builtins (*note The Directory Stack::).

`--enable-disabled-builtins'
     Allow builtin commands to be invoked via `builtin xxx' even after
     `xxx' has been disabled using `enable -n xxx'.  See *note Bash
     Builtins::, for details of the `builtin' and `enable' builtin
     commands.

`--enable-dparen-arithmetic'
     Include support for the `((...))' command (*note Conditional
     Constructs::).

`--enable-extended-glob'
     Include support for the extended pattern matching features
     described above under *note Pattern Matching::.

`--enable-help-builtin'
     Include the `help' builtin, which displays help on shell builtins
     and variables (*note Bash Builtins::).

`--enable-history'
     Include command history and the `fc' and `history' builtin
     commands (*note Bash History Facilities::).

`--enable-job-control'
     This enables the job control features (*note Job Control::), if
     the operating system supports them.

`--enable-multibyte'
     This enables support for multibyte characters if the operating
     system provides the necessary support.

`--enable-net-redirections'
     This enables the special handling of filenames of the form
     `/dev/tcp/HOST/PORT' and `/dev/udp/HOST/PORT' when used in
     redirections (*note Redirections::).

`--enable-process-substitution'
     This enables process substitution (*note Process Substitution::) if
     the operating system provides the necessary support.

`--enable-progcomp'
     Enable the programmable completion facilities (*note Programmable
     Completion::).  If Readline is not enabled, this option has no
     effect.

`--enable-prompt-string-decoding'
     Turn on the interpretation of a number of backslash-escaped
     characters in the `$PS1', `$PS2', `$PS3', and `$PS4' prompt
     strings.  See *note Printing a Prompt::, for a complete list of
     prompt string escape sequences.

`--enable-readline'
     Include support for command-line editing and history with the Bash
     version of the Readline library (*note Command Line Editing::).

`--enable-restricted'
     Include support for a "restricted shell".  If this is enabled,
     Bash, when called as `rbash', enters a restricted mode.  See *note
     The Restricted Shell::, for a description of restricted mode.

`--enable-select'
     Include the `select' builtin, which allows the generation of simple
     menus (*note Conditional Constructs::).

`--enable-separate-helpfiles'
     Use external files for the documentation displayed by the `help'
     builtin instead of storing the text internally.

`--enable-single-help-strings'
     Store the text displayed by the `help' builtin as a single string
     for each help topic.  This aids in translating the text to
     different languages.  You may need to disable this if your
     compiler cannot handle very long string literals.

`--enable-strict-posix-default'
     Make Bash POSIX-conformant by default (*note Bash POSIX Mode::).

`--enable-usg-echo-default'
     A synonym for `--enable-xpg-echo-default'.

`--enable-xpg-echo-default'
     Make the `echo' builtin expand backslash-escaped characters by
     default, without requiring the `-e' option.  This sets the default
     value of the `xpg_echo' shell option to `on', which makes the Bash
     `echo' behave more like the version specified in the Single Unix
     Specification, version 3.  *Note Bash Builtins::, for a
     description of the escape sequences that `echo' recognizes.


   The file `config-top.h' contains C Preprocessor `#define' statements
for options which are not settable from `configure'.  Some of these are
not meant to be changed; beware of the consequences if you do.  Read
the comments associated with each definition for more information about
its effect.


File: bash.info,  Node: Reporting Bugs,  Next: Major Differences From The Bourne Shell,  Prev: Installing Bash,  Up: Top

Appendix A Reporting Bugs
*************************

Please report all bugs you find in Bash.  But first, you should make
sure that it really is a bug, and that it appears in the latest version
of Bash.  The latest version of Bash is always available for FTP from
`ftp://ftp.gnu.org/pub/bash/'.

   Once you have determined that a bug actually exists, use the
`bashbug' command to submit a bug report.  If you have a fix, you are
encouraged to mail that as well!  Suggestions and `philosophical' bug
reports may be mailed to <bug-bash@gnu.org> or posted to the Usenet
newsgroup `gnu.bash.bug'.

   All bug reports should include:
   * The version number of Bash.

   * The hardware and operating system.

   * The compiler used to compile Bash.

   * A description of the bug behaviour.

   * A short script or `recipe' which exercises the bug and may be used
     to reproduce it.

`bashbug' inserts the first three items automatically into the template
it provides for filing a bug report.

   Please send all reports concerning this manual to <chet@po.CWRU.Edu>.


File: bash.info,  Node: Major Differences From The Bourne Shell,  Next: Copying This Manual,  Prev: Reporting Bugs,  Up: Top

Appendix B Major Differences From The Bourne Shell
**************************************************

Bash implements essentially the same grammar, parameter and variable
expansion, redirection, and quoting as the Bourne Shell.  Bash uses the
POSIX standard as the specification of how these features are to be
implemented.  There are some differences between the traditional Bourne
shell and Bash; this section quickly details the differences of
significance.  A number of these differences are explained in greater
depth in previous sections.  This section uses the version of `sh'
included in SVR4.2 (the last version of the historical Bourne shell) as
the baseline reference.

   * Bash is POSIX-conformant, even where the POSIX specification
     differs from traditional `sh' behavior (*note Bash POSIX Mode::).

   * Bash has multi-character invocation options (*note Invoking
     Bash::).

   * Bash has command-line editing (*note Command Line Editing::) and
     the `bind' builtin.

   * Bash provides a programmable word completion mechanism (*note
     Programmable Completion::), and two builtin commands, `complete'
     and `compgen', to manipulate it.

   * Bash has command history (*note Bash History Facilities::) and the
     `history' and `fc' builtins to manipulate it.  The Bash history
     list maintains timestamp information and uses the value of the
     `HISTTIMEFORMAT' variable to display it.

   * Bash implements `csh'-like history expansion (*note History
     Interaction::).

   * Bash has one-dimensional array variables (*note Arrays::), and the
     appropriate variable expansions and assignment syntax to use them.
     Several of the Bash builtins take options to act on arrays.  Bash
     provides a number of built-in array variables.

   * The `$'...'' quoting syntax, which expands ANSI-C
     backslash-escaped characters in the text between the single quotes,
     is supported (*note ANSI-C Quoting::).

   * Bash supports the `$"..."' quoting syntax to do locale-specific
     translation of the characters between the double quotes.  The
     `-D', `--dump-strings', and `--dump-po-strings' invocation options
     list the translatable strings found in a script (*note Locale
     Translation::).

   * Bash implements the `!' keyword to negate the return value of a
     pipeline (*note Pipelines::).  Very useful when an `if' statement
     needs to act only if a test fails.  The Bash `-o pipefail' option
     to `set' will cause a pipeline to return a failure status if any
     command fails.

   * Bash has the `time' reserved word and command timing (*note
     Pipelines::).  The display of the timing statistics may be
     controlled with the `TIMEFORMAT' variable.

   * Bash implements the `for (( EXPR1 ; EXPR2 ; EXPR3 ))' arithmetic
     for command, similar to the C language (*note Looping
     Constructs::).

   * Bash includes the `select' compound command, which allows the
     generation of simple menus (*note Conditional Constructs::).

   * Bash includes the `[[' compound command, which makes conditional
     testing part of the shell grammar (*note Conditional
     Constructs::), including optional regular expression matching.

   * Bash provides optional case-insensitive matching for the `case' and
     `[[' constructs.

   * Bash includes brace expansion (*note Brace Expansion::) and tilde
     expansion (*note Tilde Expansion::).

   * Bash implements command aliases and the `alias' and `unalias'
     builtins (*note Aliases::).

   * Bash provides shell arithmetic, the `((' compound command (*note
     Conditional Constructs::), and arithmetic expansion (*note Shell
     Arithmetic::).

   * Variables present in the shell's initial environment are
     automatically exported to child processes.  The Bourne shell does
     not normally do this unless the variables are explicitly marked
     using the `export' command.

   * Bash supports the `+=' assignment operator, which appends to the
     value of the variable named on the left hand side.

   * Bash includes the POSIX pattern removal `%', `#', `%%' and `##'
     expansions to remove leading or trailing substrings from variable
     values (*note Shell Parameter Expansion::).

   * The expansion `${#xx}', which returns the length of `${xx}', is
     supported (*note Shell Parameter Expansion::).

   * The expansion `${var:'OFFSET`[:'LENGTH`]}', which expands to the
     substring of `var''s value of length LENGTH, beginning at OFFSET,
     is present (*note Shell Parameter Expansion::).

   * The expansion `${var/[/]'PATTERN`[/'REPLACEMENT`]}', which matches
     PATTERN and replaces it with REPLACEMENT in the value of `var', is
     available (*note Shell Parameter Expansion::).

   * The expansion `${!PREFIX}*' expansion, which expands to the names
     of all shell variables whose names begin with PREFIX, is available
     (*note Shell Parameter Expansion::).

   * Bash has INDIRECT variable expansion using `${!word}' (*note Shell
     Parameter Expansion::).

   * Bash can expand positional parameters beyond `$9' using `${NUM}'.

   * The POSIX `$()' form of command substitution is implemented (*note
     Command Substitution::), and preferred to the Bourne shell's ```'
     (which is also implemented for backwards compatibility).

   * Bash has process substitution (*note Process Substitution::).

   * Bash automatically assigns variables that provide information
     about the current user (`UID', `EUID', and `GROUPS'), the current
     host (`HOSTTYPE', `OSTYPE', `MACHTYPE', and `HOSTNAME'), and the
     instance of Bash that is running (`BASH', `BASH_VERSION', and
     `BASH_VERSINFO').  *Note Bash Variables::, for details.

   * The `IFS' variable is used to split only the results of expansion,
     not all words (*note Word Splitting::).  This closes a
     longstanding shell security hole.

   * Bash implements the full set of POSIX filename expansion operators,
     including CHARACTER CLASSES, EQUIVALENCE CLASSES, and COLLATING
     SYMBOLS (*note Filename Expansion::).

   * Bash implements extended pattern matching features when the
     `extglob' shell option is enabled (*note Pattern Matching::).

   * It is possible to have a variable and a function with the same
     name; `sh' does not separate the two name spaces.

   * Bash functions are permitted to have local variables using the
     `local' builtin, and thus useful recursive functions may be written
     (*note Bash Builtins::).

   * Variable assignments preceding commands affect only that command,
     even builtins and functions (*note Environment::).  In `sh', all
     variable assignments preceding commands are global unless the
     command is executed from the file system.

   * Bash performs filename expansion on filenames specified as operands
     to input and output redirection operators (*note Redirections::).

   * Bash contains the `<>' redirection operator, allowing a file to be
     opened for both reading and writing, and the `&>' redirection
     operator, for directing standard output and standard error to the
     same file (*note Redirections::).

   * Bash includes the `<<<' redirection operator, allowing a string to
     be used as the standard input to a command.

   * Bash implements the `[n]<&WORD' and `[n]>&WORD' redirection
     operators, which move one file descriptor to another.

   * Bash treats a number of filenames specially when they are used in
     redirection operators (*note Redirections::).

   * Bash can open network connections to arbitrary machines and
     services with the redirection operators (*note Redirections::).

   * The `noclobber' option is available to avoid overwriting existing
     files with output redirection (*note The Set Builtin::).  The `>|'
     redirection operator may be used to override `noclobber'.

   * The Bash `cd' and `pwd' builtins (*note Bourne Shell Builtins::)
     each take `-L' and `-P' options to switch between logical and
     physical modes.

   * Bash allows a function to override a builtin with the same name,
     and provides access to that builtin's functionality within the
     function via the `builtin' and `command' builtins (*note Bash
     Builtins::).

   * The `command' builtin allows selective disabling of functions when
     command lookup is performed (*note Bash Builtins::).

   * Individual builtins may be enabled or disabled using the `enable'
     builtin (*note Bash Builtins::).

   * The Bash `exec' builtin takes additional options that allow users
     to control the contents of the environment passed to the executed
     command, and what the zeroth argument to the command is to be
     (*note Bourne Shell Builtins::).

   * Shell functions may be exported to children via the environment
     using `export -f' (*note Shell Functions::).

   * The Bash `export', `readonly', and `declare' builtins can take a
     `-f' option to act on shell functions, a `-p' option to display
     variables with various attributes set in a format that can be used
     as shell input, a `-n' option to remove various variable
     attributes, and `name=value' arguments to set variable attributes
     and values simultaneously.

   * The Bash `hash' builtin allows a name to be associated with an
     arbitrary filename, even when that filename cannot be found by
     searching the `$PATH', using `hash -p' (*note Bourne Shell
     Builtins::).

   * Bash includes a `help' builtin for quick reference to shell
     facilities (*note Bash Builtins::).

   * The `printf' builtin is available to display formatted output
     (*note Bash Builtins::).

   * The Bash `read' builtin (*note Bash Builtins::) will read a line
     ending in `\' with the `-r' option, and will use the `REPLY'
     variable as a default if no non-option arguments are supplied.
     The Bash `read' builtin also accepts a prompt string with the `-p'
     option and will use Readline to obtain the line when given the
     `-e' option.  The `read' builtin also has additional options to
     control input: the `-s' option will turn off echoing of input
     characters as they are read, the `-t' option will allow `read' to
     time out if input does not arrive within a specified number of
     seconds, the `-n' option will allow reading only a specified
     number of characters rather than a full line, and the `-d' option
     will read until a particular character rather than newline.

   * The `return' builtin may be used to abort execution of scripts
     executed with the `.' or `source' builtins (*note Bourne Shell
     Builtins::).

   * Bash includes the `shopt' builtin, for finer control of shell
     optional capabilities (*note Bash Builtins::), and allows these
     options to be set and unset at shell invocation (*note Invoking
     Bash::).

   * Bash has much more optional behavior controllable with the `set'
     builtin (*note The Set Builtin::).

   * The `-x' (`xtrace') option displays commands other than simple
     commands when performing an execution trace (*note The Set
     Builtin::).

   * The `test' builtin (*note Bourne Shell Builtins::) is slightly
     different, as it implements the POSIX algorithm, which specifies
     the behavior based on the number of arguments.

   * Bash includes the `caller' builtin, which displays the context of
     any active subroutine call (a shell function or a script executed
     with the `.' or `source' builtins).  This supports the bash
     debugger.

   * The `trap' builtin (*note Bourne Shell Builtins::) allows a
     `DEBUG' pseudo-signal specification, similar to `EXIT'.  Commands
     specified with a `DEBUG' trap are executed before every simple
     command, `for' command, `case' command, `select' command, every
     arithmetic `for' command, and before the first command executes in
     a shell function.  The `DEBUG' trap is not inherited by shell
     functions unless the function has been given the `trace' attribute
     or the `functrace' option has been enabled using the `shopt'
     builtin.  The `extdebug' shell option has additional effects on the
     `DEBUG' trap.

     The `trap' builtin (*note Bourne Shell Builtins::) allows an `ERR'
     pseudo-signal specification, similar to `EXIT' and `DEBUG'.
     Commands specified with an `ERR' trap are executed after a simple
     command fails, with a few exceptions.  The `ERR' trap is not
     inherited by shell functions unless the `-o errtrace' option to
     the `set' builtin is enabled.

     The `trap' builtin (*note Bourne Shell Builtins::) allows a
     `RETURN' pseudo-signal specification, similar to `EXIT' and
     `DEBUG'.  Commands specified with an `RETURN' trap are executed
     before execution resumes after a shell function or a shell script
     executed with `.' or `source' returns.  The `RETURN' trap is not
     inherited by shell functions unless the function has been given
     the `trace' attribute or the `functrace' option has been enabled
     using the `shopt' builtin.

   * The Bash `type' builtin is more extensive and gives more
     information about the names it finds (*note Bash Builtins::).

   * The Bash `umask' builtin permits a `-p' option to cause the output
     to be displayed in the form of a `umask' command that may be
     reused as input (*note Bourne Shell Builtins::).

   * Bash implements a `csh'-like directory stack, and provides the
     `pushd', `popd', and `dirs' builtins to manipulate it (*note The
     Directory Stack::).  Bash also makes the directory stack visible
     as the value of the `DIRSTACK' shell variable.

   * Bash interprets special backslash-escaped characters in the prompt
     strings when interactive (*note Printing a Prompt::).

   * The Bash restricted mode is more useful (*note The Restricted
     Shell::); the SVR4.2 shell restricted mode is too limited.

   * The `disown' builtin can remove a job from the internal shell job
     table (*note Job Control Builtins::) or suppress the sending of
     `SIGHUP' to a job when the shell exits as the result of a `SIGHUP'.

   * Bash includes a number of features to support a separate debugger
     for shell scripts.

   * The SVR4.2 shell has two privilege-related builtins (`mldmode' and
     `priv') not present in Bash.

   * Bash does not have the `stop' or `newgrp' builtins.

   * Bash does not use the `SHACCT' variable or perform shell
     accounting.

   * The SVR4.2 `sh' uses a `TIMEOUT' variable like Bash uses `TMOUT'.


More features unique to Bash may be found in *note Bash Features::.

B.1 Implementation Differences From The SVR4.2 Shell
====================================================

Since Bash is a completely new implementation, it does not suffer from
many of the limitations of the SVR4.2 shell.  For instance:

   * Bash does not fork a subshell when redirecting into or out of a
     shell control structure such as  an `if' or `while' statement.

   * Bash does not allow unbalanced quotes.  The SVR4.2 shell will
     silently insert a needed closing quote at `EOF' under certain
     circumstances.  This can be the cause of some hard-to-find errors.

   * The SVR4.2 shell uses a baroque memory management scheme based on
     trapping `SIGSEGV'.  If the shell is started from a process with
     `SIGSEGV' blocked (e.g., by using the `system()' C library
     function call), it misbehaves badly.

   * In a questionable attempt at security, the SVR4.2 shell, when
     invoked without the `-p' option, will alter its real and effective
     UID and GID if they are less than some magic threshold value,
     commonly 100.  This can lead to unexpected results.

   * The SVR4.2 shell does not allow users to trap `SIGSEGV',
     `SIGALRM', or `SIGCHLD'.

   * The SVR4.2 shell does not allow the `IFS', `MAILCHECK', `PATH',
     `PS1', or `PS2' variables to be unset.

   * The SVR4.2 shell treats `^' as the undocumented equivalent of `|'.

   * Bash allows multiple option arguments when it is invoked (`-x -v');
     the SVR4.2 shell allows only one option argument (`-xv').  In
     fact, some versions of the shell dump core if the second argument
     begins with a `-'.

   * The SVR4.2 shell exits a script if any builtin fails; Bash exits a
     script only if one of the POSIX special builtins fails, and only
     for certain failures, as enumerated in the POSIX standard.

   * The SVR4.2 shell behaves differently when invoked as `jsh' (it
     turns on job control).


File: bash.info,  Node: Copying This Manual,  Next: Builtin Index,  Prev: Major Differences From The Bourne Shell,  Up: Top

Appendix C Copying This Manual
******************************

* Menu:

* GNU Free Documentation License::      License for copying this manual.


File: bash.info,  Node: GNU Free Documentation License,  Up: Copying This Manual

C.1 GNU Free Documentation License
==================================

                      Version 1.2, November 2002

     Copyright (C) 2000,2001,2002 Free Software Foundation, Inc.
     59 Temple Place, Suite 330, Boston, MA  02111-1307, USA

     Everyone is permitted to copy and distribute verbatim copies
     of this license document, but changing it is not allowed.

  0. PREAMBLE

     The purpose of this License is to make a manual, textbook, or other
     functional and useful document "free" in the sense of freedom: to
     assure everyone the effective freedom to copy and redistribute it,
     with or without modifying it, either commercially or
     noncommercially.  Secondarily, this License preserves for the
     author and publisher a way to get credit for their work, while not
     being considered responsible for modifications made by others.

     This License is a kind of "copyleft", which means that derivative
     works of the document must themselves be free in the same sense.
     It complements the GNU General Public License, which is a copyleft
     license designed for free software.

     We have designed this License in order to use it for manuals for
     free software, because free software needs free documentation: a
     free program should come with manuals providing the same freedoms
     that the software does.  But this License is not limited to
     software manuals; it can be used for any textual work, regardless
     of subject matter or whether it is published as a printed book.
     We recommend this License principally for works whose purpose is
     instruction or reference.

  1. APPLICABILITY AND DEFINITIONS

     This License applies to any manual or other work, in any medium,
     that contains a notice placed by the copyright holder saying it
     can be distributed under the terms of this License.  Such a notice
     grants a world-wide, royalty-free license, unlimited in duration,
     to use that work under the conditions stated herein.  The
     "Document", below, refers to any such manual or work.  Any member
     of the public is a licensee, and is addressed as "you".  You
     accept the license if you copy, modify or distribute the work in a
     way requiring permission under copyright law.

     A "Modified Version" of the Document means any work containing the
     Document or a portion of it, either copied verbatim, or with
     modifications and/or translated into another language.

     A "Secondary Section" is a named appendix or a front-matter section
     of the Document that deals exclusively with the relationship of the
     publishers or authors of the Document to the Document's overall
     subject (or to related matters) and contains nothing that could
     fall directly within that overall subject.  (Thus, if the Document
     is in part a textbook of mathematics, a Secondary Section may not
     explain any mathematics.)  The relationship could be a matter of
     historical connection with the subject or with related matters, or
     of legal, commercial, philosophical, ethical or political position
     regarding them.

     The "Invariant Sections" are certain Secondary Sections whose
     titles are designated, as being those of Invariant Sections, in
     the notice that says that the Document is released under this
     License.  If a section does not fit the above definition of
     Secondary then it is not allowed to be designated as Invariant.
     The Document may contain zero Invariant Sections.  If the Document
     does not identify any Invariant Sections then there are none.

     The "Cover Texts" are certain short passages of text that are
     listed, as Front-Cover Texts or Back-Cover Texts, in the notice
     that says that the Document is released under this License.  A
     Front-Cover Text may be at most 5 words, and a Back-Cover Text may
     be at most 25 words.

     A "Transparent" copy of the Document means a machine-readable copy,
     represented in a format whose specification is available to the
     general public, that is suitable for revising the document
     straightforwardly with generic text editors or (for images
     composed of pixels) generic paint programs or (for drawings) some
     widely available drawing editor, and that is suitable for input to
     text formatters or for automatic translation to a variety of
     formats suitable for input to text formatters.  A copy made in an
     otherwise Transparent file format whose markup, or absence of
     markup, has been arranged to thwart or discourage subsequent
     modification by readers is not Transparent.  An image format is
     not Transparent if used for any substantial amount of text.  A
     copy that is not "Transparent" is called "Opaque".

     Examples of suitable formats for Transparent copies include plain
     ASCII without markup, Texinfo input format, LaTeX input format,
     SGML or XML using a publicly available DTD, and
     standard-conforming simple HTML, PostScript or PDF designed for
     human modification.  Examples of transparent image formats include
     PNG, XCF and JPG.  Opaque formats include proprietary formats that
     can be read and edited only by proprietary word processors, SGML or
     XML for which the DTD and/or processing tools are not generally
     available, and the machine-generated HTML, PostScript or PDF
     produced by some word processors for output purposes only.

     The "Title Page" means, for a printed book, the title page itself,
     plus such following pages as are needed to hold, legibly, the
     material this License requires to appear in the title page.  For
     works in formats which do not have any title page as such, "Title
     Page" means the text near the most prominent appearance of the
     work's title, preceding the beginning of the body of the text.

     A section "Entitled XYZ" means a named subunit of the Document
     whose title either is precisely XYZ or contains XYZ in parentheses
     following text that translates XYZ in another language.  (Here XYZ
     stands for a specific section name mentioned below, such as
     "Acknowledgements", "Dedications", "Endorsements", or "History".)
     To "Preserve the Title" of such a section when you modify the
     Document means that it remains a section "Entitled XYZ" according
     to this definition.

     The Document may include Warranty Disclaimers next to the notice
     which states that this License applies to the Document.  These
     Warranty Disclaimers are considered to be included by reference in
     this License, but only as regards disclaiming warranties: any other
     implication that these Warranty Disclaimers may have is void and
     has no effect on the meaning of this License.

  2. VERBATIM COPYING

     You may copy and distribute the Document in any medium, either
     commercially or noncommercially, provided that this License, the
     copyright notices, and the license notice saying this License
     applies to the Document are reproduced in all copies, and that you
     add no other conditions whatsoever to those of this License.  You
     may not use technical measures to obstruct or control the reading
     or further copying of the copies you make or distribute.  However,
     you may accept compensation in exchange for copies.  If you
     distribute a large enough number of copies you must also follow
     the conditions in section 3.

     You may also lend copies, under the same conditions stated above,
     and you may publicly display copies.

  3. COPYING IN QUANTITY

     If you publish printed copies (or copies in media that commonly
     have printed covers) of the Document, numbering more than 100, and
     the Document's license notice requires Cover Texts, you must
     enclose the copies in covers that carry, clearly and legibly, all
     these Cover Texts: Front-Cover Texts on the front cover, and
     Back-Cover Texts on the back cover.  Both covers must also clearly
     and legibly identify you as the publisher of these copies.  The
     front cover must present the full title with all words of the
     title equally prominent and visible.  You may add other material
     on the covers in addition.  Copying with changes limited to the
     covers, as long as they preserve the title of the Document and
     satisfy these conditions, can be treated as verbatim copying in
     other respects.

     If the required texts for either cover are too voluminous to fit
     legibly, you should put the first ones listed (as many as fit
     reasonably) on the actual cover, and continue the rest onto
     adjacent pages.

     If you publish or distribute Opaque copies of the Document
     numbering more than 100, you must either include a
     machine-readable Transparent copy along with each Opaque copy, or
     state in or with each Opaque copy a computer-network location from
     which the general network-using public has access to download
     using public-standard network protocols a complete Transparent
     copy of the Document, free of added material.  If you use the
     latter option, you must take reasonably prudent steps, when you
     begin distribution of Opaque copies in quantity, to ensure that
     this Transparent copy will remain thus accessible at the stated
     location until at least one year after the last time you
     distribute an Opaque copy (directly or through your agents or
     retailers) of that edition to the public.

     It is requested, but not required, that you contact the authors of
     the Document well before redistributing any large number of
     copies, to give them a chance to provide you with an updated
     version of the Document.

  4. MODIFICATIONS

     You may copy and distribute a Modified Version of the Document
     under the conditions of sections 2 and 3 above, provided that you
     release the Modified Version under precisely this License, with
     the Modified Version filling the role of the Document, thus
     licensing distribution and modification of the Modified Version to
     whoever possesses a copy of it.  In addition, you must do these
     things in the Modified Version:

       A. Use in the Title Page (and on the covers, if any) a title
          distinct from that of the Document, and from those of
          previous versions (which should, if there were any, be listed
          in the History section of the Document).  You may use the
          same title as a previous version if the original publisher of
          that version gives permission.

       B. List on the Title Page, as authors, one or more persons or
          entities responsible for authorship of the modifications in
          the Modified Version, together with at least five of the
          principal authors of the Document (all of its principal
          authors, if it has fewer than five), unless they release you
          from this requirement.

       C. State on the Title page the name of the publisher of the
          Modified Version, as the publisher.

       D. Preserve all the copyright notices of the Document.

       E. Add an appropriate copyright notice for your modifications
          adjacent to the other copyright notices.

       F. Include, immediately after the copyright notices, a license
          notice giving the public permission to use the Modified
          Version under the terms of this License, in the form shown in
          the Addendum below.

       G. Preserve in that license notice the full lists of Invariant
          Sections and required Cover Texts given in the Document's
          license notice.

       H. Include an unaltered copy of this License.

       I. Preserve the section Entitled "History", Preserve its Title,
          and add to it an item stating at least the title, year, new
          authors, and publisher of the Modified Version as given on
          the Title Page.  If there is no section Entitled "History" in
          the Document, create one stating the title, year, authors,
          and publisher of the Document as given on its Title Page,
          then add an item describing the Modified Version as stated in
          the previous sentence.

       J. Preserve the network location, if any, given in the Document
          for public access to a Transparent copy of the Document, and
          likewise the network locations given in the Document for
          previous versions it was based on.  These may be placed in
          the "History" section.  You may omit a network location for a
          work that was published at least four years before the
          Document itself, or if the original publisher of the version
          it refers to gives permission.

       K. For any section Entitled "Acknowledgements" or "Dedications",
          Preserve the Title of the section, and preserve in the
          section all the substance and tone of each of the contributor
          acknowledgements and/or dedications given therein.

       L. Preserve all the Invariant Sections of the Document,
          unaltered in their text and in their titles.  Section numbers
          or the equivalent are not considered part of the section
          titles.

       M. Delete any section Entitled "Endorsements".  Such a section
          may not be included in the Modified Version.

       N. Do not retitle any existing section to be Entitled
          "Endorsements" or to conflict in title with any Invariant
          Section.

       O. Preserve any Warranty Disclaimers.

     If the Modified Version includes new front-matter sections or
     appendices that qualify as Secondary Sections and contain no
     material copied from the Document, you may at your option
     designate some or all of these sections as invariant.  To do this,
     add their titles to the list of Invariant Sections in the Modified
     Version's license notice.  These titles must be distinct from any
     other section titles.

     You may add a section Entitled "Endorsements", provided it contains
     nothing but endorsements of your Modified Version by various
     parties--for example, statements of peer review or that the text
     has been approved by an organization as the authoritative
     definition of a standard.

     You may add a passage of up to five words as a Front-Cover Text,
     and a passage of up to 25 words as a Back-Cover Text, to the end
     of the list of Cover Texts in the Modified Version.  Only one
     passage of Front-Cover Text and one of Back-Cover Text may be
     added by (or through arrangements made by) any one entity.  If the
     Document already includes a cover text for the same cover,
     previously added by you or by arrangement made by the same entity
     you are acting on behalf of, you may not add another; but you may
     replace the old one, on explicit permission from the previous
     publisher that added the old one.

     The author(s) and publisher(s) of the Document do not by this
     License give permission to use their names for publicity for or to
     assert or imply endorsement of any Modified Version.

  5. COMBINING DOCUMENTS

     You may combine the Document with other documents released under
     this License, under the terms defined in section 4 above for
     modified versions, provided that you include in the combination
     all of the Invariant Sections of all of the original documents,
     unmodified, and list them all as Invariant Sections of your
     combined work in its license notice, and that you preserve all
     their Warranty Disclaimers.

     The combined work need only contain one copy of this License, and
     multiple identical Invariant Sections may be replaced with a single
     copy.  If there are multiple Invariant Sections with the same name
     but different contents, make the title of each such section unique
     by adding at the end of it, in parentheses, the name of the
     original author or publisher of that section if known, or else a
     unique number.  Make the same adjustment to the section titles in
     the list of Invariant Sections in the license notice of the
     combined work.

     In the combination, you must combine any sections Entitled
     "History" in the various original documents, forming one section
     Entitled "History"; likewise combine any sections Entitled
     "Acknowledgements", and any sections Entitled "Dedications".  You
     must delete all sections Entitled "Endorsements."

  6. COLLECTIONS OF DOCUMENTS

     You may make a collection consisting of the Document and other
     documents released under this License, and replace the individual
     copies of this License in the various documents with a single copy
     that is included in the collection, provided that you follow the
     rules of this License for verbatim copying of each of the
     documents in all other respects.

     You may extract a single document from such a collection, and
     distribute it individually under this License, provided you insert
     a copy of this License into the extracted document, and follow
     this License in all other respects regarding verbatim copying of
     that document.

  7. AGGREGATION WITH INDEPENDENT WORKS

     A compilation of the Document or its derivatives with other
     separate and independent documents or works, in or on a volume of
     a storage or distribution medium, is called an "aggregate" if the
     copyright resulting from the compilation is not used to limit the
     legal rights of the compilation's users beyond what the individual
     works permit.  When the Document is included an aggregate, this
     License does not apply to the other works in the aggregate which
     are not themselves derivative works of the Document.

     If the Cover Text requirement of section 3 is applicable to these
     copies of the Document, then if the Document is less than one half
     of the entire aggregate, the Document's Cover Texts may be placed
     on covers that bracket the Document within the aggregate, or the
     electronic equivalent of covers if the Document is in electronic
     form.  Otherwise they must appear on printed covers that bracket
     the whole aggregate.

  8. TRANSLATION

     Translation is considered a kind of modification, so you may
     distribute translations of the Document under the terms of section
     4.  Replacing Invariant Sections with translations requires special
     permission from their copyright holders, but you may include
     translations of some or all Invariant Sections in addition to the
     original versions of these Invariant Sections.  You may include a
     translation of this License, and all the license notices in the
     Document, and any Warranty Disclaimers, provided that you also
     include the original English version of this License and the
     original versions of those notices and disclaimers.  In case of a
     disagreement between the translation and the original version of
     this License or a notice or disclaimer, the original version will
     prevail.

     If a section in the Document is Entitled "Acknowledgements",
     "Dedications", or "History", the requirement (section 4) to
     Preserve its Title (section 1) will typically require changing the
     actual title.

  9. TERMINATION

     You may not copy, modify, sublicense, or distribute the Document
     except as expressly provided for under this License.  Any other
     attempt to copy, modify, sublicense or distribute the Document is
     void, and will automatically terminate your rights under this
     License.  However, parties who have received copies, or rights,
     from you under this License will not have their licenses
     terminated so long as such parties remain in full compliance.

 10. FUTURE REVISIONS OF THIS LICENSE

     The Free Software Foundation may publish new, revised versions of
     the GNU Free Documentation License from time to time.  Such new
     versions will be similar in spirit to the present version, but may
     differ in detail to address new problems or concerns.  See
     `http://www.gnu.org/copyleft/'.

     Each version of the License is given a distinguishing version
     number.  If the Document specifies that a particular numbered
     version of this License "or any later version" applies to it, you
     have the option of following the terms and conditions either of
     that specified version or of any later version that has been
     published (not as a draft) by the Free Software Foundation.  If
     the Document does not specify a version number of this License,
     you may choose any version ever published (not as a draft) by the
     Free Software Foundation.

C.1.1 ADDENDUM: How to use this License for your documents
----------------------------------------------------------

To use this License in a document you have written, include a copy of
the License in the document and put the following copyright and license
notices just after the title page:

       Copyright (C)  YEAR  YOUR NAME.
       Permission is granted to copy, distribute and/or modify this document
       under the terms of the GNU Free Documentation License, Version 1.2
       or any later version published by the Free Software Foundation;
       with no Invariant Sections, no Front-Cover Texts, and no Back-Cover Texts.
       A copy of the license is included in the section entitled ``GNU
       Free Documentation License''.

   If you have Invariant Sections, Front-Cover Texts and Back-Cover
Texts, replace the "with...Texts." line with this:

         with the Invariant Sections being LIST THEIR TITLES, with
         the Front-Cover Texts being LIST, and with the Back-Cover Texts
         being LIST.

   If you have Invariant Sections without Cover Texts, or some other
combination of the three, merge those two alternatives to suit the
situation.

   If your document contains nontrivial examples of program code, we
recommend releasing these examples in parallel under your choice of
free software license, such as the GNU General Public License, to
permit their use in free software.


File: bash.info,  Node: Builtin Index,  Next: Reserved Word Index,  Prev: Copying This Manual,  Up: Top

Index of Shell Builtin Commands
*******************************

[index]
* Menu:

* .:                                     Bourne Shell Builtins.
                                                              (line  16)
* ::                                     Bourne Shell Builtins.
                                                              (line  11)
* [:                                     Bourne Shell Builtins.
                                                              (line 212)
* alias:                                 Bash Builtins.       (line  11)
* bg:                                    Job Control Builtins.
                                                              (line   7)
* bind:                                  Bash Builtins.       (line  21)
* break:                                 Bourne Shell Builtins.
                                                              (line  29)
* builtin:                               Bash Builtins.       (line  92)
* caller:                                Bash Builtins.       (line 100)
* cd:                                    Bourne Shell Builtins.
                                                              (line  36)
* command:                               Bash Builtins.       (line 117)
* compgen:                               Programmable Completion Builtins.
                                                              (line  10)
* complete:                              Programmable Completion Builtins.
                                                              (line  28)
* continue:                              Bourne Shell Builtins.
                                                              (line  55)
* declare:                               Bash Builtins.       (line 136)
* dirs:                                  Directory Stack Builtins.
                                                              (line   7)
* disown:                                Job Control Builtins.
                                                              (line  83)
* echo:                                  Bash Builtins.       (line 191)
* enable:                                Bash Builtins.       (line 243)
* eval:                                  Bourne Shell Builtins.
                                                              (line  63)
* exec:                                  Bourne Shell Builtins.
                                                              (line  70)
* exit:                                  Bourne Shell Builtins.
                                                              (line  82)
* export:                                Bourne Shell Builtins.
                                                              (line  88)
* fc:                                    Bash History Builtins.
                                                              (line  10)
* fg:                                    Job Control Builtins.
                                                              (line  16)
* getopts:                               Bourne Shell Builtins.
                                                              (line 103)
* hash:                                  Bourne Shell Builtins.
                                                              (line 145)
* help:                                  Bash Builtins.       (line 271)
* history:                               Bash History Builtins.
                                                              (line  39)
* jobs:                                  Job Control Builtins.
                                                              (line  25)
* kill:                                  Job Control Builtins.
                                                              (line  57)
* let:                                   Bash Builtins.       (line 280)
* local:                                 Bash Builtins.       (line 287)
* logout:                                Bash Builtins.       (line 297)
* popd:                                  Directory Stack Builtins.
                                                              (line  37)
* printf:                                Bash Builtins.       (line 301)
* pushd:                                 Directory Stack Builtins.
                                                              (line  58)
* pwd:                                   Bourne Shell Builtins.
                                                              (line 163)
* read:                                  Bash Builtins.       (line 326)
* readonly:                              Bourne Shell Builtins.
                                                              (line 172)
* return:                                Bourne Shell Builtins.
                                                              (line 187)
* set:                                   The Set Builtin.     (line   9)
* shift:                                 Bourne Shell Builtins.
                                                              (line 200)
* shopt:                                 Bash Builtins.       (line 387)
* source:                                Bash Builtins.       (line 623)
* suspend:                               Job Control Builtins.
                                                              (line  94)
* test:                                  Bourne Shell Builtins.
                                                              (line 212)
* times:                                 Bourne Shell Builtins.
                                                              (line 278)
* trap:                                  Bourne Shell Builtins.
                                                              (line 283)
* type:                                  Bash Builtins.       (line 627)
* typeset:                               Bash Builtins.       (line 658)
* ulimit:                                Bash Builtins.       (line 664)
* umask:                                 Bourne Shell Builtins.
                                                              (line 324)
* unalias:                               Bash Builtins.       (line 742)
* unset:                                 Bourne Shell Builtins.
                                                              (line 341)
* wait:                                  Job Control Builtins.
                                                              (line  73)


File: bash.info,  Node: Reserved Word Index,  Next: Variable Index,  Prev: Builtin Index,  Up: Top

Index of Shell Reserved Words
*****************************

[index]
* Menu:

* !:                                     Pipelines.           (line   8)
* [[:                                    Conditional Constructs.
                                                              (line 108)
* ]]:                                    Conditional Constructs.
                                                              (line 108)
* case:                                  Conditional Constructs.
                                                              (line  28)
* do:                                    Looping Constructs.  (line  12)
* done:                                  Looping Constructs.  (line  12)
* elif:                                  Conditional Constructs.
                                                              (line   7)
* else:                                  Conditional Constructs.
                                                              (line   7)
* esac:                                  Conditional Constructs.
                                                              (line  28)
* fi:                                    Conditional Constructs.
                                                              (line   7)
* for:                                   Looping Constructs.  (line  29)
* function:                              Shell Functions.     (line  13)
* if:                                    Conditional Constructs.
                                                              (line   7)
* in:                                    Conditional Constructs.
                                                              (line  28)
* select:                                Conditional Constructs.
                                                              (line  67)
* then:                                  Conditional Constructs.
                                                              (line   7)
* time:                                  Pipelines.           (line   8)
* until:                                 Looping Constructs.  (line  12)
* while:                                 Looping Constructs.  (line  20)
* {:                                     Command Grouping.    (line  21)
* }:                                     Command Grouping.    (line  21)


File: bash.info,  Node: Variable Index,  Next: Function Index,  Prev: Reserved Word Index,  Up: Top

Parameter and Variable Index
****************************

[index]
* Menu:

* !:                                     Special Parameters.  (line  46)
* #:                                     Special Parameters.  (line  30)
* $:                                     Special Parameters.  (line  42)
* *:                                     Special Parameters.  (line   9)
* -:                                     Special Parameters.  (line  37)
* 0:                                     Special Parameters.  (line  50)
* ?:                                     Special Parameters.  (line  33)
* @:                                     Special Parameters.  (line  19)
* _:                                     Special Parameters.  (line  59)
* auto_resume:                           Job Control Variables.
                                                              (line   6)
* BASH:                                  Bash Variables.      (line  13)
* BASH_ARGC:                             Bash Variables.      (line  16)
* BASH_ARGV:                             Bash Variables.      (line  26)
* BASH_COMMAND:                          Bash Variables.      (line  36)
* BASH_ENV:                              Bash Variables.      (line  41)
* BASH_EXECUTION_STRING:                 Bash Variables.      (line  47)
* BASH_LINENO:                           Bash Variables.      (line  50)
* BASH_REMATCH:                          Bash Variables.      (line  58)
* BASH_SOURCE:                           Bash Variables.      (line  66)
* BASH_SUBSHELL:                         Bash Variables.      (line  70)
* BASH_VERSINFO:                         Bash Variables.      (line  74)
* BASH_VERSION:                          Bash Variables.      (line  98)
* bell-style:                            Readline Init File Syntax.
                                                              (line  38)
* bind-tty-special-chars:                Readline Init File Syntax.
                                                              (line  45)
* CDPATH:                                Bourne Shell Variables.
                                                              (line   9)
* COLUMNS:                               Bash Variables.      (line 101)
* comment-begin:                         Readline Init File Syntax.
                                                              (line  50)
* COMP_CWORD:                            Bash Variables.      (line 106)
* COMP_LINE:                             Bash Variables.      (line 112)
* COMP_POINT:                            Bash Variables.      (line 117)
* COMP_WORDBREAKS:                       Bash Variables.      (line 125)
* COMP_WORDS:                            Bash Variables.      (line 131)
* completion-query-items:                Readline Init File Syntax.
                                                              (line  60)
* COMPREPLY:                             Bash Variables.      (line 138)
* convert-meta:                          Readline Init File Syntax.
                                                              (line  70)
* DIRSTACK:                              Bash Variables.      (line 143)
* disable-completion:                    Readline Init File Syntax.
                                                              (line  76)
* editing-mode:                          Readline Init File Syntax.
                                                              (line  81)
* EMACS:                                 Bash Variables.      (line 153)
* enable-keypad:                         Readline Init File Syntax.
                                                              (line  87)
* EUID:                                  Bash Variables.      (line 158)
* expand-tilde:                          Readline Init File Syntax.
                                                              (line  92)
* FCEDIT:                                Bash Variables.      (line 162)
* FIGNORE:                               Bash Variables.      (line 166)
* FUNCNAME:                              Bash Variables.      (line 172)
* GLOBIGNORE:                            Bash Variables.      (line 181)
* GROUPS:                                Bash Variables.      (line 187)
* histchars:                             Bash Variables.      (line 193)
* HISTCMD:                               Bash Variables.      (line 208)
* HISTCONTROL:                           Bash Variables.      (line 213)
* HISTFILE:                              Bash Variables.      (line 229)
* HISTFILESIZE:                          Bash Variables.      (line 233)
* HISTIGNORE:                            Bash Variables.      (line 241)
* history-preserve-point:                Readline Init File Syntax.
                                                              (line  96)
* HISTSIZE:                              Bash Variables.      (line 260)
* HISTTIMEFORMAT:                        Bash Variables.      (line 264)
* HOME:                                  Bourne Shell Variables.
                                                              (line  13)
* horizontal-scroll-mode:                Readline Init File Syntax.
                                                              (line 101)
* HOSTFILE:                              Bash Variables.      (line 271)
* HOSTNAME:                              Bash Variables.      (line 282)
* HOSTTYPE:                              Bash Variables.      (line 285)
* IFS:                                   Bourne Shell Variables.
                                                              (line  18)
* IGNOREEOF:                             Bash Variables.      (line 288)
* input-meta:                            Readline Init File Syntax.
                                                              (line 108)
* INPUTRC:                               Bash Variables.      (line 298)
* isearch-terminators:                   Readline Init File Syntax.
                                                              (line 115)
* keymap:                                Readline Init File Syntax.
                                                              (line 122)
* LANG:                                  Bash Variables.      (line 302)
* LC_ALL:                                Bash Variables.      (line 306)
* LC_COLLATE:                            Bash Variables.      (line 310)
* LC_CTYPE:                              Bash Variables.      (line 317)
* LC_MESSAGES <1>:                       Bash Variables.      (line 322)
* LC_MESSAGES:                           Locale Translation.  (line  11)
* LC_NUMERIC:                            Bash Variables.      (line 326)
* LINENO:                                Bash Variables.      (line 330)
* LINES:                                 Bash Variables.      (line 334)
* MACHTYPE:                              Bash Variables.      (line 339)
* MAIL:                                  Bourne Shell Variables.
                                                              (line  22)
* MAILCHECK:                             Bash Variables.      (line 343)
* MAILPATH:                              Bourne Shell Variables.
                                                              (line  27)
* mark-modified-lines:                   Readline Init File Syntax.
                                                              (line 135)
* mark-symlinked-directories:            Readline Init File Syntax.
                                                              (line 140)
* match-hidden-files:                    Readline Init File Syntax.
                                                              (line 145)
* meta-flag:                             Readline Init File Syntax.
                                                              (line 108)
* OLDPWD:                                Bash Variables.      (line 351)
* OPTARG:                                Bourne Shell Variables.
                                                              (line  34)
* OPTERR:                                Bash Variables.      (line 354)
* OPTIND:                                Bourne Shell Variables.
                                                              (line  38)
* OSTYPE:                                Bash Variables.      (line 358)
* output-meta:                           Readline Init File Syntax.
                                                              (line 152)
* page-completions:                      Readline Init File Syntax.
                                                              (line 157)
* PATH:                                  Bourne Shell Variables.
                                                              (line  42)
* PIPESTATUS:                            Bash Variables.      (line 361)
* POSIXLY_CORRECT:                       Bash Variables.      (line 366)
* PPID:                                  Bash Variables.      (line 375)
* PROMPT_COMMAND:                        Bash Variables.      (line 379)
* PS1:                                   Bourne Shell Variables.
                                                              (line  48)
* PS2:                                   Bourne Shell Variables.
                                                              (line  53)
* PS3:                                   Bash Variables.      (line 383)
* PS4:                                   Bash Variables.      (line 388)
* PWD:                                   Bash Variables.      (line 394)
* RANDOM:                                Bash Variables.      (line 397)
* REPLY:                                 Bash Variables.      (line 402)
* SECONDS:                               Bash Variables.      (line 405)
* SHELL:                                 Bash Variables.      (line 411)
* SHELLOPTS:                             Bash Variables.      (line 416)
* SHLVL:                                 Bash Variables.      (line 425)
* show-all-if-ambiguous:                 Readline Init File Syntax.
                                                              (line 167)
* show-all-if-unmodified:                Readline Init File Syntax.
                                                              (line 173)
* TEXTDOMAIN:                            Locale Translation.  (line  11)
* TEXTDOMAINDIR:                         Locale Translation.  (line  11)
* TIMEFORMAT:                            Bash Variables.      (line 430)
* TMOUT:                                 Bash Variables.      (line 468)
* TMPDIR:                                Bash Variables.      (line 480)
* UID:                                   Bash Variables.      (line 484)
* visible-stats:                         Readline Init File Syntax.
                                                              (line 182)


File: bash.info,  Node: Function Index,  Next: Concept Index,  Prev: Variable Index,  Up: Top

Function Index
**************

[index]
* Menu:

* abort (C-g):                           Miscellaneous Commands.
                                                               (line 10)
* accept-line (Newline or Return):       Commands For History. (line  6)
* backward-char (C-b):                   Commands For Moving.  (line 15)
* backward-delete-char (Rubout):         Commands For Text.    (line 11)
* backward-kill-line (C-x Rubout):       Commands For Killing. (line  9)
* backward-kill-word (M-<DEL>):          Commands For Killing. (line 24)
* backward-word (M-b):                   Commands For Moving.  (line 22)
* beginning-of-history (M-<):            Commands For History. (line 20)
* beginning-of-line (C-a):               Commands For Moving.  (line  6)
* call-last-kbd-macro (C-x e):           Keyboard Macros.      (line 13)
* capitalize-word (M-c):                 Commands For Text.    (line 46)
* character-search (C-]):                Miscellaneous Commands.
                                                               (line 41)
* character-search-backward (M-C-]):     Miscellaneous Commands.
                                                               (line 46)
* clear-screen (C-l):                    Commands For Moving.  (line 26)
* complete (<TAB>):                      Commands For Completion.
                                                               (line  6)
* copy-backward-word ():                 Commands For Killing. (line 49)
* copy-forward-word ():                  Commands For Killing. (line 54)
* copy-region-as-kill ():                Commands For Killing. (line 45)
* delete-char (C-d):                     Commands For Text.    (line  6)
* delete-char-or-list ():                Commands For Completion.
                                                               (line 34)
* delete-horizontal-space ():            Commands For Killing. (line 37)
* digit-argument (M-0, M-1, ... M--):    Numeric Arguments.    (line  6)
* do-uppercase-version (M-a, M-b, M-X, ...): Miscellaneous Commands.
                                                               (line 14)
* downcase-word (M-l):                   Commands For Text.    (line 42)
* dump-functions ():                     Miscellaneous Commands.
                                                               (line 64)
* dump-macros ():                        Miscellaneous Commands.
                                                               (line 76)
* dump-variables ():                     Miscellaneous Commands.
                                                               (line 70)
* end-kbd-macro (C-x )):                 Keyboard Macros.      (line  9)
* end-of-history (M->):                  Commands For History. (line 23)
* end-of-line (C-e):                     Commands For Moving.  (line  9)
* exchange-point-and-mark (C-x C-x):     Miscellaneous Commands.
                                                               (line 36)
* forward-backward-delete-char ():       Commands For Text.    (line 15)
* forward-char (C-f):                    Commands For Moving.  (line 12)
* forward-search-history (C-s):          Commands For History. (line 31)
* forward-word (M-f):                    Commands For Moving.  (line 18)
* history-search-backward ():            Commands For History. (line 51)
* history-search-forward ():             Commands For History. (line 46)
* insert-comment (M-#):                  Miscellaneous Commands.
                                                               (line 51)
* insert-completions (M-*):              Commands For Completion.
                                                               (line 18)
* kill-line (C-k):                       Commands For Killing. (line  6)
* kill-region ():                        Commands For Killing. (line 41)
* kill-whole-line ():                    Commands For Killing. (line 15)
* kill-word (M-d):                       Commands For Killing. (line 19)
* menu-complete ():                      Commands For Completion.
                                                               (line 22)
* next-history (C-n):                    Commands For History. (line 17)
* non-incremental-forward-search-history (M-n): Commands For History.
                                                               (line 41)
* non-incremental-reverse-search-history (M-p): Commands For History.
                                                               (line 36)
* overwrite-mode ():                     Commands For Text.    (line 50)
* possible-completions (M-?):            Commands For Completion.
                                                               (line 15)
* prefix-meta (<ESC>):                   Miscellaneous Commands.
                                                               (line 18)
* previous-history (C-p):                Commands For History. (line 13)
* quoted-insert (C-q or C-v):            Commands For Text.    (line 20)
* re-read-init-file (C-x C-r):           Miscellaneous Commands.
                                                               (line  6)
* redraw-current-line ():                Commands For Moving.  (line 30)
* reverse-search-history (C-r):          Commands For History. (line 27)
* revert-line (M-r):                     Miscellaneous Commands.
                                                               (line 25)
* self-insert (a, b, A, 1, !, ...):      Commands For Text.    (line 24)
* set-mark (C-@):                        Miscellaneous Commands.
                                                               (line 32)
* start-kbd-macro (C-x ():               Keyboard Macros.      (line  6)
* transpose-chars (C-t):                 Commands For Text.    (line 27)
* transpose-words (M-t):                 Commands For Text.    (line 33)
* undo (C-_ or C-x C-u):                 Miscellaneous Commands.
                                                               (line 22)
* universal-argument ():                 Numeric Arguments.    (line 10)
* unix-filename-rubout ():               Commands For Killing. (line 32)
* unix-line-discard (C-u):               Commands For Killing. (line 12)
* unix-word-rubout (C-w):                Commands For Killing. (line 28)
* upcase-word (M-u):                     Commands For Text.    (line 38)
* yank (C-y):                            Commands For Killing. (line 59)
* yank-last-arg (M-. or M-_):            Commands For History. (line 65)
* yank-nth-arg (M-C-y):                  Commands For History. (line 56)
* yank-pop (M-y):                        Commands For Killing. (line 62)


File: bash.info,  Node: Concept Index,  Prev: Function Index,  Up: Top

Concept Index
*************

[index]
* Menu:

* alias expansion:                       Aliases.             (line   6)
* arithmetic evaluation:                 Shell Arithmetic.    (line   6)
* arithmetic expansion:                  Arithmetic Expansion.
                                                              (line   6)
* arithmetic, shell:                     Shell Arithmetic.    (line   6)
* arrays:                                Arrays.              (line   6)
* background:                            Job Control Basics.  (line   6)
* Bash configuration:                    Basic Installation.  (line   6)
* Bash installation:                     Basic Installation.  (line   6)
* Bourne shell:                          Basic Shell Features.
                                                              (line   6)
* brace expansion:                       Brace Expansion.     (line   6)
* builtin:                               Definitions.         (line  17)
* command editing:                       Readline Bare Essentials.
                                                              (line   6)
* command execution:                     Command Search and Execution.
                                                              (line   6)
* command expansion:                     Simple Command Expansion.
                                                              (line   6)
* command history:                       Bash History Facilities.
                                                              (line   6)
* command search:                        Command Search and Execution.
                                                              (line   6)
* command substitution:                  Command Substitution.
                                                              (line   6)
* command timing:                        Pipelines.           (line   8)
* commands, compound:                    Compound Commands.   (line   6)
* commands, conditional:                 Conditional Constructs.
                                                              (line   6)
* commands, grouping:                    Command Grouping.    (line   6)
* commands, lists:                       Lists.               (line   6)
* commands, looping:                     Looping Constructs.  (line   6)
* commands, pipelines:                   Pipelines.           (line   6)
* commands, shell:                       Shell Commands.      (line   6)
* commands, simple:                      Simple Commands.     (line   6)
* comments, shell:                       Comments.            (line   6)
* completion builtins:                   Programmable Completion Builtins.
                                                              (line   6)
* configuration:                         Basic Installation.  (line   6)
* control operator:                      Definitions.         (line  21)
* directory stack:                       The Directory Stack. (line   6)
* editing command lines:                 Readline Bare Essentials.
                                                              (line   6)
* environment:                           Environment.         (line   6)
* evaluation, arithmetic:                Shell Arithmetic.    (line   6)
* event designators:                     Event Designators.   (line   6)
* execution environment:                 Command Execution Environment.
                                                              (line   6)
* exit status <1>:                       Exit Status.         (line   6)
* exit status:                           Definitions.         (line  25)
* expansion:                             Shell Expansions.    (line   6)
* expansion, arithmetic:                 Arithmetic Expansion.
                                                              (line   6)
* expansion, brace:                      Brace Expansion.     (line   6)
* expansion, filename:                   Filename Expansion.  (line   9)
* expansion, parameter:                  Shell Parameter Expansion.
                                                              (line   6)
* expansion, pathname:                   Filename Expansion.  (line   9)
* expansion, tilde:                      Tilde Expansion.     (line   6)
* expressions, arithmetic:               Shell Arithmetic.    (line   6)
* expressions, conditional:              Bash Conditional Expressions.
                                                              (line   6)
* FDL, GNU Free Documentation License:   GNU Free Documentation License.
                                                              (line   6)
* field:                                 Definitions.         (line  29)
* filename:                              Definitions.         (line  34)
* filename expansion:                    Filename Expansion.  (line   9)
* foreground:                            Job Control Basics.  (line   6)
* functions, shell:                      Shell Functions.     (line   6)
* history builtins:                      Bash History Builtins.
                                                              (line   6)
* history events:                        Event Designators.   (line   7)
* history expansion:                     History Interaction. (line   6)
* history list:                          Bash History Facilities.
                                                              (line   6)
* History, how to use:                   Programmable Completion Builtins.
                                                              (line 209)
* identifier:                            Definitions.         (line  50)
* initialization file, readline:         Readline Init File.  (line   6)
* installation:                          Basic Installation.  (line   6)
* interaction, readline:                 Readline Interaction.
                                                              (line   6)
* interactive shell <1>:                 Interactive Shells.  (line   6)
* interactive shell:                     Invoking Bash.       (line 127)
* internationalization:                  Locale Translation.  (line   6)
* job:                                   Definitions.         (line  37)
* job control <1>:                       Job Control Basics.  (line   6)
* job control:                           Definitions.         (line  41)
* kill ring:                             Readline Killing Commands.
                                                              (line  19)
* killing text:                          Readline Killing Commands.
                                                              (line   6)
* localization:                          Locale Translation.  (line   6)
* login shell:                           Invoking Bash.       (line 124)
* matching, pattern:                     Pattern Matching.    (line   6)
* metacharacter:                         Definitions.         (line  45)
* name:                                  Definitions.         (line  50)
* native languages:                      Locale Translation.  (line   6)
* notation, readline:                    Readline Bare Essentials.
                                                              (line   6)
* operator, shell:                       Definitions.         (line  56)
* parameter expansion:                   Shell Parameter Expansion.
                                                              (line   6)
* parameters:                            Shell Parameters.    (line   6)
* parameters, positional:                Positional Parameters.
                                                              (line   6)
* parameters, special:                   Special Parameters.  (line   6)
* pathname expansion:                    Filename Expansion.  (line   9)
* pattern matching:                      Pattern Matching.    (line   6)
* pipeline:                              Pipelines.           (line   6)
* POSIX:                                 Definitions.         (line   9)
* POSIX Mode:                            Bash POSIX Mode.     (line   6)
* process group:                         Definitions.         (line  60)
* process group ID:                      Definitions.         (line  64)
* process substitution:                  Process Substitution.
                                                              (line   6)
* programmable completion:               Programmable Completion.
                                                              (line   6)
* prompting:                             Printing a Prompt.   (line   6)
* quoting:                               Quoting.             (line   6)
* quoting, ANSI:                         ANSI-C Quoting.      (line   6)
* Readline, how to use:                  Job Control Variables.
                                                              (line  24)
* redirection:                           Redirections.        (line   6)
* reserved word:                         Definitions.         (line  68)
* restricted shell:                      The Restricted Shell.
                                                              (line   6)
* return status:                         Definitions.         (line  73)
* shell arithmetic:                      Shell Arithmetic.    (line   6)
* shell function:                        Shell Functions.     (line   6)
* shell script:                          Shell Scripts.       (line   6)
* shell variable:                        Shell Parameters.    (line   6)
* shell, interactive:                    Interactive Shells.  (line   6)
* signal:                                Definitions.         (line  76)
* signal handling:                       Signals.             (line   6)
* special builtin <1>:                   Special Builtins.    (line   6)
* special builtin:                       Definitions.         (line  80)
* startup files:                         Bash Startup Files.  (line   6)
* suspending jobs:                       Job Control Basics.  (line   6)
* tilde expansion:                       Tilde Expansion.     (line   6)
* token:                                 Definitions.         (line  84)
* translation, native languages:         Locale Translation.  (line   6)
* variable, shell:                       Shell Parameters.    (line   6)
* variables, readline:                   Readline Init File Syntax.
                                                              (line  37)
* word:                                  Definitions.         (line  88)
* word splitting:                        Word Splitting.      (line   6)
* yanking text:                          Readline Killing Commands.
                                                              (line   6)



Tag Table:
Node: Top1434
Node: Introduction3517
Node: What is Bash?3745
Node: What is a shell?4858
Node: Definitions7399
Node: Basic Shell Features10166
Node: Shell Syntax11385
Node: Shell Operation12415
Node: Quoting13709
Node: Escape Character15012
Node: Single Quotes15497
Node: Double Quotes15845
Node: ANSI-C Quoting16970
Node: Locale Translation17926
Node: Comments18822
Node: Shell Commands19436
Node: Simple Commands20202
Node: Pipelines20833
Node: Lists22708
Node: Compound Commands24339
Node: Looping Constructs25123
Node: Conditional Constructs27570
Node: Command Grouping35029
Node: Shell Functions36478
Node: Shell Parameters40887
Node: Positional Parameters43217
Node: Special Parameters44117
Node: Shell Expansions47081
Node: Brace Expansion49006
Node: Tilde Expansion51331
Node: Shell Parameter Expansion53682
Node: Command Substitution61152
Node: Arithmetic Expansion62485
Node: Process Substitution63335
Node: Word Splitting64385
Node: Filename Expansion65846
Node: Pattern Matching67982
Node: Quote Removal71300
Node: Redirections71595
Node: Executing Commands79325
Node: Simple Command Expansion79995
Node: Command Search and Execution81925
Node: Command Execution Environment83931
Node: Environment86702
Node: Exit Status88362
Node: Signals89566
Node: Shell Scripts91530
Node: Shell Builtin Commands94048
Node: Bourne Shell Builtins95717
Node: Bash Builtins112819
Node: The Set Builtin142257
Node: Special Builtins150632
Node: Shell Variables151602
Node: Bourne Shell Variables152042
Node: Bash Variables154023
Node: Bash Features174337
Node: Invoking Bash175220
Node: Bash Startup Files181029
Node: Interactive Shells185887
Node: What is an Interactive Shell?186297
Node: Is this Shell Interactive?186947
Node: Interactive Shell Behavior187762
Node: Bash Conditional Expressions191038
Node: Shell Arithmetic194617
Node: Aliases197363
Node: Arrays199931
Node: The Directory Stack203280
Node: Directory Stack Builtins203994
Node: Printing a Prompt206885
Node: The Restricted Shell209599
Node: Bash POSIX Mode211431
Node: Job Control219190
Node: Job Control Basics219657
Node: Job Control Builtins224033
Node: Job Control Variables228360
Node: Command Line Editing229518
Node: Introduction and Notation230517
Node: Readline Interaction232139
Node: Readline Bare Essentials233330
Node: Readline Movement Commands235119
Node: Readline Killing Commands236084
Node: Readline Arguments238004
Node: Searching239048
Node: Readline Init File241234
Node: Readline Init File Syntax242381
Node: Conditional Init Constructs254712
Node: Sample Init File257245
Node: Bindable Readline Commands260362
Node: Commands For Moving261569
Node: Commands For History262430
Node: Commands For Text265585
Node: Commands For Killing268258
Node: Numeric Arguments270400
Node: Commands For Completion271539
Node: Keyboard Macros275132
Node: Miscellaneous Commands275703
Node: Readline vi Mode281014
Node: Programmable Completion281928
Node: Programmable Completion Builtins287720
Node: Using History Interactively295316
Node: Bash History Facilities295996
Node: Bash History Builtins298691
Node: History Interaction302548
Node: Event Designators305104
Node: Word Designators306119
Node: Modifiers307758
Node: Installing Bash309164
Node: Basic Installation310294
Node: Compilers and Options312986
Node: Compiling For Multiple Architectures313727
Node: Installation Names315391
Node: Specifying the System Type316209
Node: Sharing Defaults316925
Node: Operation Controls317598
Node: Optional Features318556
Node: Reporting Bugs327487
Node: Major Differences From The Bourne Shell328681
Node: Copying This Manual345346
Node: GNU Free Documentation License345622
Node: Builtin Index368028
Node: Reserved Word Index374577
Node: Variable Index377013
Node: Function Index387946
Node: Concept Index394666

End Tag Table
