40V× Texas Instruments X-Loader 1.5.0 (Mar 27 2011 - 17:37:56) Beagle Rev C1/C2/C3 Reading boot sector Loading u-boot.bin from mmc U-Boot 2011.03-rc1-00000-g5ace684-dirty (Apr 01 2011 - 17:08:33) OMAP3530-GP ES3.0, CPU-OPP2, L3-165MHz, Max CPU Clock 600 mHz OMAP3 Beagle board + LPDDR/NAND I2C: ready DRAM: 256 MiB NAND: 256 MiB MMC: OMAP SD/MMC: 0 *** Warning - bad CRC, using default environment In: serial Out: serial Err: serial Beagle Rev C1/C2/C3 Recognized Tincantools Zippy board (rev 1 ) Die ID #48f6000300000000040323090d01b00c Hit any key to stop autoboot: 3  2  1  0 The user button is currently NOT pressed. SD/MMC found on device 0 reading uEnv.txt 35 bytes read Loaded environment from uEnv.txt Importing environment from mmc ... Loading file "/boot/uImage" from mmc device 0:2 (xxa2) 3173456 bytes read Booting from mmc ... ## Booting kernel from Legacy Image at 80200000 ... Image Name: Angstrom/2.6.37/beagleboard Image Type: ARM Linux Kernel Image (uncompressed) Data Size: 3173392 Bytes = 3 MiB Load Address: 80008000 Entry Point: 80008000 Verifying Checksum ... OK Loading Kernel Image ... OK OK Starting kernel ... Uncompressing Linux... done, booting the kernel. [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.37 (koen@dominion) (gcc version 4.5.3 20110311 (prerelease) (GCC) ) #1 PREEMPT Thu May 5 16:05:19 CEST 2011 [ 0.000000] CPU: ARMv7 Processor [411fc083] revision 3 (ARMv7), cr=10c53c7f [ 0.000000] CPU: VIPT nonaliasing data cache, VIPT nonaliasing instruction cache [ 0.000000] Machine: OMAP3 Beagle Board [ 0.000000] Beagle expansionboard: zippy [ 0.000000] Reserving 12582912 bytes SDRAM for VRAM [ 0.000000] Memory policy: ECC disabled, Data cache writeback [ 0.000000] OMAP3430/3530 ES3.0 (l2cache iva sgx neon isp ) [ 0.000000] SRAM: Mapped pa 0x40200000 to va 0xfe400000 size: 0x10000 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 61952 [ 0.000000] Kernel command line: console=ttyO2,115200 mpurate=auto buddy=zippy camera=lbcm3m1 vram=12M omapfb.mode=dvi:hd720 omapdss.def_disp=dvi root=/dev/mmcblk0p2 rw rootfstype=ext3 rootwait [ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes) [ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) [ 0.000000] allocated 1310720 bytes of page_cgroup [ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups [ 0.000000] Memory: 244MB = 244MB total [ 0.000000] Memory: 239700k/239700k available, 22444k reserved, 0K highmem [ 0.000000] Virtual kernel memory layout: [ 0.000000] vector : 0xffff0000 - 0xffff1000 ( 4 kB) [ 0.000000] fixmap : 0xfff00000 - 0xfffe0000 ( 896 kB) [ 0.000000] DMA : 0xffc00000 - 0xffe00000 ( 2 MB) [ 0.000000] vmalloc : 0xd0800000 - 0xf8000000 ( 632 MB) [ 0.000000] lowmem : 0xc0000000 - 0xd0000000 ( 256 MB) [ 0.000000] modules : 0xbf000000 - 0xc0000000 ( 16 MB) [ 0.000000] .init : 0xc0008000 - 0xc003b000 ( 204 kB) [ 0.000000] .text : 0xc003b000 - 0xc05efa1c (5843 kB) [ 0.000000] .data : 0xc05f0000 - 0xc0633a80 ( 271 kB) [ 0.000000] Preemptable hierarchical RCU implementation. [ 0.000000] RCU-based detection of stalled CPUs is disabled. [ 0.000000] Verbose stalled-CPUs detection is disabled. [ 0.000000] NR_IRQS:402 [ 0.000000] Clocking rate (Crystal/Core/MPU): 26.0/332/500 MHz [ 0.000000] Reprogramming SDRC clock to 332000000 Hz [ 0.000000] GPMC revision 5.0 [ 0.000000] IRQ: Found an INTC at 0xfa200000 (revision 4.0) with 96 interrupts [ 0.000000] Total of 96 interrupts on 1 active controller [ 0.000000] OMAP clockevent source: GPTIMER12 at 32768 Hz [ 0.000000] Console: colour dummy device 80x30 [ 0.000000] Calibrating delay loop... 479.96 BogoMIPS (lpj=1871872) [ 0.000000] pid_max: default: 32768 minimum: 301 [ 0.000000] Mount-cache hash table entries: 512 [ 0.000000] Initializing cgroup subsys ns [ 0.000000] ns_cgroup deprecated: consider using the 'clone_children' flag without the ns_cgroup. [ 0.000000] Initializing cgroup subsys cpuacct [ 0.000000] Initializing cgroup subsys memory [ 0.000000] Initializing cgroup subsys devices [ 0.000000] Initializing cgroup subsys freezer [ 0.000000] CPU: Testing write buffer coherency: ok [ 0.000000] devtmpfs: initialized [ 0.000000] regulator: core version 0.5 [ 0.000000] regulator: dummy: [ 0.000000] NET: Registered protocol family 16 [ 0.000000] OMAP GPIO hardware version 2.5 [ 0.000000] OMAP GPIO hardware version 2.5 [ 0.000000] OMAP GPIO hardware version 2.5 [ 0.000000] OMAP GPIO hardware version 2.5 [ 0.000000] OMAP GPIO hardware version 2.5 [ 0.000000] OMAP GPIO hardware version 2.5 [ 0.000000] omap_mux_init: Add partition: #1: core, flags: 0 [ 0.000000] OMAP3 Beagle Rev: C1/C2/C3 [ 0.000000] Beagle expansionboard: initializing enc28j60 [ 0.000000] Beagle expansionboard: assigning GPIO 141 and 162 to MMC1 [ 0.000000] Found NAND on CS0 [ 0.000000] Registering NAND on CS0 [ 0.000000] Unable to get DVI reset GPIO [ 0.000000] hw-breakpoint: debug architecture 0x4 unsupported. [ 0.000000] OMAP DMA hardware revision 4.0 [ 0.010864] bio: create slab at 0 [ 0.012725] SCSI subsystem initialized [ 0.014923] usbcore: registered new interface driver usbfs [ 0.015136] usbcore: registered new interface driver hub [ 0.015380] usbcore: registered new device driver usb [ 0.015899] omap_i2c omap_i2c.1: bus 1 rev3.12 at 2600 kHz [ 0.020446] twl4030: PIH (irq 7) chaining IRQs 368..375 [ 0.020507] twl4030: power (irq 373) chaining IRQs 376..383 [ 0.021118] twl4030: gpio (irq 368) chaining IRQs 384..401 [ 0.048217] regulator: VUSB1V5: 1500 mV normal standby [ 0.048797] regulator: VUSB1V8: 1800 mV normal standby [ 0.049346] regulator: VUSB3V1: 3100 mV normal standby [ 0.066680] twl4030_usb twl4030_usb: Initialized TWL4030 USB module [ 0.078460] regulator: VMMC1: 1850 <--> 3150 mV at 3000 mV normal standby [ 0.079040] regulator: VDAC: 1800 mV normal standby [ 0.079589] regulator: VDVI: 1800 mV normal standby [ 0.080261] regulator: VSIM: 1800 <--> 3000 mV at 1800 mV normal standby [ 0.080444] omap_device: omap_i2c.1: new worst case deactivate latency 0: 30517 [ 0.080535] omap_device: omap_i2c.2: new worst case activate latency 0: 30517 [ 0.092590] omap_i2c omap_i2c.2: bus 2 rev3.12 at 400 kHz [ 0.107543] omap_i2c omap_i2c.3: bus 3 rev3.12 at 100 kHz [ 0.108764] Advanced Linux Sound Architecture Driver Version 1.0.23. [ 0.109558] Switching to clocksource 32k_counter [ 0.128875] musb_hdrc: version 6.0, musb-dma, otg (peripheral+host), debug=0 [ 0.129425] musb_hdrc musb_hdrc: USB OTG mode controller at fa0ab000 using DMA, IRQ 92 [ 0.130004] NET: Registered protocol family 2 [ 0.130310] IP route cache hash table entries: 2048 (order: 1, 8192 bytes) [ 0.131011] TCP established hash table entries: 8192 (order: 4, 65536 bytes) [ 0.131225] TCP bind hash table entries: 8192 (order: 3, 32768 bytes) [ 0.131378] TCP: Hash tables configured (established 8192 bind 8192) [ 0.131378] TCP reno registered [ 0.131408] UDP hash table entries: 256 (order: 0, 4096 bytes) [ 0.131439] UDP-Lite hash table entries: 256 (order: 0, 4096 bytes) [ 0.131774] NET: Registered protocol family 1 [ 0.132507] RPC: Registered udp transport module. [ 0.132507] RPC: Registered tcp transport module. [ 0.132537] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 0.133880] omap-iommu omap-iommu.0: isp registered [ 0.136383] VFS: Disk quotas dquot_6.5.2 [ 0.136505] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.138244] squashfs: version 4.0 (2009/01/31) Phillip Lougher [ 0.139160] JFFS2 version 2.2. (NAND) (SUMMARY) © 2001-2006 Red Hat, Inc. [ 0.140319] msgmni has been set to 468 [ 0.142822] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254) [ 0.142852] io scheduler noop registered [ 0.142852] io scheduler deadline registered [ 0.143066] io scheduler cfq registered (default) [ 0.203674] OMAP DSS rev 2.0 [ 0.203765] OMAP DISPC rev 3.0 [ 0.203826] OMAP VENC rev 2 [ 0.204101] OMAP DSI rev 1.0 [ 0.532775] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 0.649078] omap_uart.0: ttyO0 at MMIO 0x4806a000 (irq = 72) is a OMAP UART0 [ 0.680053] omap_uart.1: ttyO1 at MMIO 0x4806c000 (irq = 73) is a OMAP UART1 [ 0.711334] omap_uart.2: ttyO2 at MMIO 0x49020000 (irq = 74) is a OMAP UART2 [ 1.418304] console [ttyO2] enabled [ 1.449005] brd: module loaded [ 1.457855] loop: module loaded [ 1.463226] omap2-nand driver initializing [ 1.467864] ONFI flash detected [ 1.471496] NAND device: Manufacturer ID: 0x2c, Chip ID: 0xba (Micron ) [ 1.478973] cmdlinepart partition parsing not available [ 1.484497] Creating 5 MTD partitions on "omap2-nand.0": [ 1.490173] 0x000000000000-0x000000080000 : "X-Loader" [ 1.497680] 0x000000080000-0x000000260000 : "U-Boot" [ 1.505432] 0x000000260000-0x000000280000 : "U-Boot Env" [ 1.512817] 0x000000280000-0x000000680000 : "Kernel" [ 1.521301] 0x000000680000-0x000010000000 : "File System" [ 1.630310] enc28j60 spi4.0: enc28j60 Ethernet driver 1.01 loaded [ 1.641601] net eth0: enc28j60 driver registered [ 1.646606] usbcore: registered new interface driver catc [ 1.652343] catc: v2.8:CATC EL1210A NetMate USB Ethernet driver [ 1.658691] usbcore: registered new interface driver kaweth [ 1.664581] pegasus: v0.6.14 (2006/09/27), Pegasus/Pegasus II USB Ethernet driver [ 1.672576] usbcore: registered new interface driver pegasus [ 1.678497] rtl8150: v0.6.2 (2004/08/27):rtl8150 based usb-ethernet driver [ 1.685852] usbcore: registered new interface driver rtl8150 [ 1.691925] usbcore: registered new interface driver asix [ 1.697723] usbcore: registered new interface driver cdc_ether [ 1.704010] usbcore: registered new interface driver dm9601 [ 1.709960] usbcore: registered new interface driver smsc95xx [ 1.716156] usbcore: registered new interface driver gl620a [ 1.722320] usbcore: registered new interface driver net1080 [ 1.728393] usbcore: registered new interface driver plusb [ 1.734252] usbcore: registered new interface driver rndis_host [ 1.740600] usbcore: registered new interface driver cdc_subset [ 1.746948] usbcore: registered new interface driver zaurus [ 1.752960] usbcore: registered new interface driver MOSCHIP usb-ethernet driver [ 1.761444] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.768463] ehci-omap.0 supply hsusb0 not found, using dummy regulator [ 1.775421] ehci-omap.0 supply hsusb1 not found, using dummy regulator [ 3.797210] ehci-omap ehci-omap.0: OMAP-EHCI Host Controller [ 3.803649] ehci-omap ehci-omap.0: new USB bus registered, assigned bus number 1 [ 3.812988] ehci-omap ehci-omap.0: irq 77, io mem 0x48064800 [ 3.828552] ehci-omap ehci-omap.0: USB 2.0 started, EHCI 1.00 [ 3.834716] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 3.841888] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 3.849517] usb usb1: Product: OMAP-EHCI Host Controller [ 3.855163] usb usb1: Manufacturer: Linux 2.6.37 ehci_hcd [ 3.860839] usb usb1: SerialNumber: ehci-omap.0 [ 3.866577] hub 1-0:1.0: USB hub found [ 3.870605] hub 1-0:1.0: 3 ports detected [ 3.906738] Initializing USB Mass Storage driver... [ 3.912078] usbcore: registered new interface driver usb-storage [ 3.918457] USB Mass Storage support registered. [ 3.923919] mice: PS/2 mouse device common for all mice [ 3.930145] input: gpio-keys as /devices/platform/gpio-keys/input/input0 [ 3.947296] input: twl4030_pwrbutton as /devices/platform/omap/omap_i2c.1/i2c-1/1-0049/twl4030_pwrbutton/input/input1 [ 3.959259] i2c /dev entries driver [ 3.964050] Linux media interface: v0.10 [ 3.968292] Linux video capture interface: v2.00 [ 3.973541] vpfe_init [ 3.976135] omap_device: omap_wdt.-1: new worst case activate latency 0: 30517 [ 3.984375] OMAP Watchdog Timer Rev 0x31: initial timeout 60 sec [ 3.991149] cpuidle: using governor ladder [ 3.995544] cpuidle: using governor menu [ 4.004943] mmci-omap-hs.1 supply vmmc not found, using dummy regulator [ 4.011993] mmci-omap-hs.1 supply vmmc_aux not found, using dummy regulator [ 4.023864] usbcore: registered new interface driver usbhid [ 4.029724] usbhid: USB HID core driver [ 4.034515] usbcore: registered new interface driver snd-usb-audio [ 4.041839] OMAP3 Beagle/Devkit8000 SoC init [ 4.101623] asoc: twl4030-hifi <-> omap-mcbsp-dai.1 mapping ok [ 4.112609] ALSA device list: [ 4.115722] #0: omap3beagle [ 4.118896] oprofile: hardware counters not available [ 4.124206] oprofile: using timer interrupt. [ 4.128997] TCP cubic registered [ 4.132415] NET: Registered protocol family 17 [ 4.137481] NET: Registered protocol family 15 [ 4.142272] lib80211: common routines for IEEE802.11 drivers [ 4.148254] Registering the dns_resolver key type [ 4.153259] VFP support v0.3: implementor 41 architecture 3 part 30 variant c rev 1 [ 4.161529] ThumbEE CPU extension supported. [ 4.171356] Power Management for TI OMAP3. [ 4.176757] sr_init: No PMIC hook to init smartreflex [ 4.182373] smartreflex smartreflex.0: omap_sr_probe: SmartReflex driver initialized [ 4.190826] smartreflex smartreflex.1: omap_sr_probe: SmartReflex driver initialized [ 4.200073] usb 1-2: new high speed USB device using ehci-omap and address 2 [ 4.209655] SmartReflex Class3 initialized [ 4.221923] clock: disabling unused clocks to save power [ 4.228363] platform iva.0: omap_voltage_scale: Already at the requestedrate 360000000 [ 4.236816] platform mpu.0: omap_voltage_scale: Already at the requestedrate 500000000 [ 4.245239] platform l3_main.0: omap_voltage_scale: Already at the requestedrate 166000000 [ 4.255035] registered taskstats version 1 [ 4.323333] Console: switching to colour frame buffer device 160x45 [ 4.357299] regulator_init_complete: incomplete constraints, leaving VDAC on [ 4.365142] omap_vout omap_vout: Buffer Size = 3686400 [ 4.372528] usb 1-2: New USB device found, idVendor=05e3, idProduct=0608 [ 4.379821] omap_vout omap_vout: : registered and initialized video device 0 [ 4.387420] mmc0: new high speed SD card at address aaaa [ 4.393066] usb 1-2: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 4.401855] mmcblk0: mmc0:aaaa SD02G 1.89 GiB [ 4.406646] usb 1-2: Product: USB2.0 Hub [ 4.413269] hub 1-2:1.0: USB hub found [ 4.417633] mmcblk0: p1 p2 [ 4.422271] hub 1-2:1.0: 4 ports detected [ 4.433624] EXT3-fs: barriers not enabled [ 4.711975] usb 1-2.1: new low speed USB device using ehci-omap and address 3 [ 4.854858] usb 1-2.1: New USB device found, idVendor=04f2, idProduct=0402 [ 4.862121] usb 1-2.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 4.870117] usb 1-2.1: Product: USB Keyboard [ 4.874603] usb 1-2.1: Manufacturer: Chicony [ 4.899566] input: Chicony USB Keyboard as /devices/platform/ehci-omap.0/usb1/1-2/1-2.1/1-2.1:1.0/input/input2 [ 4.911010] generic-usb 0003:04F2:0402.0001: input: USB HID v1.11 Keyboard [Chicony USB Keyboard] on usb-ehci-omap.0-2.1/input0 [ 4.949340] input: Chicony USB Keyboard as /devices/platform/ehci-omap.0/usb1/1-2/1-2.1/1-2.1:1.1/input/input3 [ 4.960723] generic-usb 0003:04F2:0402.0002: input: USB HID v1.11 Device [Chicony USB Keyboard] on usb-ehci-omap.0-2.1/input1 [ 5.055725] usb 1-2.4: new high speed USB device using ehci-omap and address 4 [ 5.182617] usb 1-2.4: New USB device found, idVendor=05e3, idProduct=0608 [ 5.189880] usb 1-2.4: New USB device strings: Mfr=0, Product=1, SerialNumber=0 [ 5.197662] usb 1-2.4: Product: USB2.0 Hub [ 5.203521] hub 1-2.4:1.0: USB hub found [ 5.208129] hub 1-2.4:1.0: 4 ports detected [ 5.261169] EXT3-fs (mmcblk0p2): warning: maximal mount count reached, running e2fsck is recommended [ 5.270660] kjournald starting. Commit interval 5 seconds [ 5.276702] [ 5.376495] EXT3-fs (mmcblk0p2): using internal journal [ 5.381988] EXT3-fs (mmcblk0p2): recovery complete [ 5.393707] EXT3-fs (mmcblk0p2): mounted filesystem with writeback data mode [ 5.401214] VFS: Mounted root (ext3 filesystem) on device 179:2. [ 5.411956] devtmpfs: mounted [ 5.415222] Freeing init memory: 204K [ 5.753051] <30>systemd[1]: systemd 26 running in system mode. (+PAM +LIBWRAP -AUDIT -SELINUX +SYSVINIT -LIBCRYPTSETUP; angstrom) Welcome to The Ã…ngström Distribution! [ 6.016479] NET: Registered protocol family 10 [ 6.023925] <28>systemd[1]: /sbin/modprobe failed with error code 1. [ 6.032775] <30>systemd[1]: Set hostname to . [ 6.299438] <27>systemd[1]: dropbear.service lacks ExecStart setting. Refusing. [ 6.359893] <28>systemd[1]: Cannot add dependency job for unit dropbear.service, ignoring: Unit dropbear.service failed to load: Invalid argument. See system logs and 'systemctl status' for details. [ 6.378662] <28>systemd[1]: Cannot add dependency job for unit avahi-daemon.service, ignoring: Unit dbus.socket failed to load: No such file or directory. See system logs and 'systemctl status' for details. [ 6.401397] <27>systemd[1]: Failed to open /dev/autofs: No such file or directory [ 6.409942] <27>systemd[1]: Failed to initialize automounter: No such file or directory [ 6.418518] <29>systemd[1]: Unit dev-mqueue.automount entered failed state. [ 6.426025] <27>systemd[1]: Failed to open /dev/autofs: No such file or directory [ 6.433990] <27>systemd[1]: Failed to initialize automounter: No such file or directory [ 6.442565] <29>systemd[1]: Unit dev-hugepages.automount entered failed state. [ 6.450531] <27>systemd[1]: Failed to open /dev/autofs: No such file or directory [ 6.458587] <27>systemd[1]: Failed to initialize automounter: No such file or directory [ 6.467132] <29>systemd[1]: Unit sys-kernel-debug.automount entered failed state. [ 6.475311] <27>systemd[1]: Failed to open /dev/autofs: No such file or directory [ 6.483276] <27>systemd[1]: Failed to initialize automounter: No such file or directory [ 6.491851] <29>systemd[1]: Unit proc-sys-fs-binfmt_misc.automount entered failed state. Started Set Up Additional Binary Formats. Starting Apply Kernel Variables... Started Load Kernel Modules. Starting Syslog Kernel Log Buffer Bridge... Started Syslog Kernel Log Buffer Bridge. Starting /var/volatile... Starting Lock Directory... Starting Remount API VFS... Starting Runtime Directory... Starting File System Check on Root Device... Starting Media Directory... [ 6.917053] <30>systemd-fsck[72]: Root directory is writable, skipping check. Starting Setup Virtual Console... Starting Apply System Clock UTC Offset... Started Apply Kernel Variables. Started /var/volatile. Started Lock Directory. Started Remount API VFS. Started Runtime Directory. Started File System Check on Root Device. Started Media Directory. Started Apply System Clock UTC Offset. Started Setup Virtual Console. Starting udev Kernel Device Manager... Starting /media/ram... Starting Remount Root FS... Starting Stdio Syslog Bridge... Started Stdio Syslog Bridge. Started /media/ram. [ 8.334808] udev[88]: starting version 165 Started Remount Root FS. Starting Recreate Volatile Files and Directories... Starting Load Random Seed... Started Recreate Volatile Files and Directories. Started Load Random Seed. [ 9.438507] <27>udevd-work[115]: kernel-provided name 'usbdev1.1' and NAME= 'bus/usb/001/001' disagree, please use SYMLINK+= or change the kernel to provide the proper name [ 9.603393] <27>udevd-work[120]: kernel-provided name 'usbdev1.2' and NAME= 'bus/usb/001/002' disagree, please use SYMLINK+= or change the kernel to provide the proper name [ 9.900695] <27>udevd-work[114]: kernel-provided name 'usbdev1.3' and NAME= 'bus/usb/001/003' disagree, please use SYMLINK+= or change the kernel to provide the proper name [ 9.937225] <27>udevd-work[116]: kernel-provided name 'usbdev1.4' and NAME= 'bus/usb/001/004' disagree, please use SYMLINK+= or change the kernel to provide the proper name nel Device Manager. it for Complete Device Initialization... Starting udev Retry Failed Events... . [ 12.484039] <27> [ 12.493713] udevd-work[101]: kernel-provided name 'uinput' and NAME= 'input/uinput' disagree, please use SYMLINK+= or change the kernel to provide the proper name [ 12.559356] [ 15.044555] quiet_error: 421 callbacks suppressed [ 15.174743] [ 15.252532] [ 15.293182] [ 15.358764] [ 16.513031] <13>root[416]: udev/mount.sh [/dev/loop2] is blacklisted, ignoring [ 18.286499] <13>root[613]: udev/mount.sh [/dev/loop4] is blacklisted, ignoring [ 18.327728] [ 18.361755] <13>root[616]: udev/mount.sh [/dev/loop1] is blacklisted, ignoring [ 18.388916] [ 18.416076] <13>root[611]: udev/mount.sh [/dev/loop5] is blacklisted, ignoring [ 18.451507] [ 18.467864] <13>root[626]: udev/mount.sh [/dev/loop0] is blacklisted, ignoring [ 18.494171] <13>root[621]: udev/mount.sh [/dev/loop6] is blacklisted, ignoring [ 18.531738] [ 18.533447] <13>root[656]: udev/mount.sh [/dev/ram11] is blacklisted, ignoring [ 18.567962] [ 18.579071] <13>root[615]: udev/mount.sh [/dev/loop7] is blacklisted, ignoring [ 18.606536] [ 18.927825] <13>root [ 18.942687] [644]: udev/mount.sh [/dev/loop3] is blacklisted, ignoring [ 18.971252] [ 18.972930] <13>root[669]: udev/mount.sh [/dev/ram3] is blacklisted, ignoring [ 19.009948] [ 19.011657] <13>root[667]: udev/mount.sh [/dev/ram1] is blacklisted, ignoring [ 19.047302] [ 19.048980] <13>root[663]: udev/mount.sh [/dev/ram7] is blacklisted, ignoring [ 19.079772] [ 19.081451] <13>root[666]: udev/mount.sh [/dev/ram12] is blacklisted, ignoring [ 19.126556] [ 19.128265] <13>root[661]: udev/mount.sh [/dev/ram6] is blacklisted, ignoring [ 19.156738] [ 19.158447] <13>root[664]: udev/mount.sh [/dev/ram4] is blacklisted, ignoring [ 19.188018] [ 19.189697] <13>root[671]: udev/mount.sh [/dev/ram0] is blacklisted, ignoring [ 19.208404] <13>root[672]: udev/mount.sh [/dev/ram9] is blacklisted, ignoring [ 19.225219] <13>root[665]: udev/mount.sh [/dev/ram8] is blacklisted, ignoring [ 19.232971] <13>root[668]: udev/mount.sh [/dev/ram14] is blacklisted, ignoring [ 19.256591] <13>root[674]: udev/mount.sh [/dev/ram13] is blacklisted, ignoring [ 19.274383] <13>root[670]: udev/mount.sh [/dev/ram5] is blacklisted, ignoring [ 19.289825] <13>root[673]: udev/mount.sh [/dev/ram2] is blacklisted, ignoring [ 19.305480] <13>root[675]: udev/mount.sh [/dev/ram10] is blacklisted, ignoring [ 19.325561] <13>root[676]: udev/mount.sh [/dev/ram15] is blacklisted, ignoring [ 19.700622] <13>root[712]: mount.sh/automount Auto-mount of [/media/mmcblk0p2] successful [ 19.884490] <13>root[719]: mount.sh/automount Auto-mount of [/media/mmcblk0p1] successful Started udev Wait for Complete Device Initialization. Starting Network Connectivity... Starting Permit User Sessions... [ 20.052642] net eth0: link down [ 20.056091] net eth0: multicast mode [ 20.060028] net eth0: multicast mode [ 20.063995] net eth0: multicast mode [ 20.067871] ADDRCONF(NETDEV_UP): eth0: link is not ready [ 20.332824] <30>avahi-daemon[725]: Found user 'avahi' (UID 44) and group 'avahi' (GID 64004). [ 20.363861] <30>avahi-daemon[725]: Successfully dropped root privileges. [ 20.386047] <30>avahi-daemon[725]: avahi-daemon 0.6.30 starting up. [ 20.402191] <27>avahi-daemon[725]: dbus_bus_get_private(): Failed to connect to socket /var/run/dbus/system_bus_socket: No such file or directory [ 20.416839] <28>avahi-daemon[725]: WARNING: Failed to contact D-Bus daemon. [ 20.424316] <30>avahi-daemon[725]: avahi-daemon 0.6.30 exiting. [ 20.497375] <29>systemd[1]: avahi-daemon.service: main process exited, code=exited, status=255 [ 20.543762] <29>systemd[1]: Unit avahi-daemon.service entered failed state. [ 21.056427] net eth0: link up - Half duplex [ 21.061523] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 21.067749] net eth0: multicast mode .-------. | | .-. | | |-----.-----.-----.| | .----..-----.-----. | | | __ | ---'| '--.| .-'| | | | | | | | |--- || --'| | | ' | | | | '---'---'--'--'--. |-----''----''--' '-----'-'-'-' -' | '---' The Angstrom Distribution beagleboard-systemd ttyO2 Angstrom v20110327 beagleboard-systemd ttyO2 beagleboard-systemd login: [ 24.676696] <30>systemd[1]: Startup finished in 6s 327ms 148us (kernel) + 18s 629ms 517us (userspace) = 24s 956ms 665us.